hathach
3b0ffd0f48
change hcd_int_handler(rhport, in_isr) signature: add in_isr
...
change tuh_int_handler() to take in_isr as optional parameter (default =
true)
2023-09-27 15:51:03 +07:00
Ha Thach
e9ba93315c
Merge pull request #2245 from arduino/fix_msd_extraneus_bytes_on_reading
...
Fix msd extraneus bytes on reading
2023-09-12 12:53:52 +07:00
hathach
c074488f75
minor rename
2023-09-09 12:20:16 +07:00
maidnl
228acbeac2
wait_pipe_fifo_empty() now returns bool (as expected using TU_ASSERT macro)
2023-09-08 15:48:05 +02:00
maidnl
7ce4cfa638
renesas: added wait function for IN transaction
...
This fixes a problem found on MSD class where data read from from disks were sometimes partially overwritten by the status MSD message ("USBS...").
The function introduced wait for the hw fifo pipe to be empty, that prevent that new writing in the fife overwrite data which are not yet be transmitted by hw.
2023-09-08 10:49:05 +02:00
hathach
21ab40bab2
- wrap up hcd max3421, work well with nrf52840
...
- also add usbh_defer_func()
2023-09-07 12:38:18 +07:00
hathach
1b9108ea0d
minor debug clean up
2023-09-06 17:11:35 +07:00
hathach
ed0a233d48
vastly improve attach/detach device, still have issue where thing is still hanged occasionally.
2023-08-31 21:28:27 +07:00
hathach
3b7d5aa042
improve connection & disconnection detection. But there is still issue when CONDETIRQ occurs but we are disabled interrupt (for osal queue access).
2023-08-31 16:52:09 +07:00
hathach
41493426b3
use ep buf to keep setup packet, work well with hid device
2023-08-30 16:21:43 +07:00
hathach
1ab488eb06
call xfer_complete_isr() when result is not successful (stalled or failed)
2023-08-30 16:04:18 +07:00
hathach
2a814a99af
- hcd_setup_send() also check for busy flag
...
- xact_inout() to support send setup
2023-08-29 20:27:37 +07:00
hathach
3740a3287a
- correct tuh_max3421e_int_api() for nrf52
...
- hcd_int_disable/enable is software only to reduce interrupt lag
2023-08-29 18:22:21 +07:00
hathach
b31924e13e
- add xfer_complete_isr()
...
- merge addr0 ep to pool
- add control status to xact in/out
- use atomic flag busy to ensure only 1 transfer is active at any time
- execute pending transfer after one is complete (or clear busy flag)
- change rtt mode to block if full
2023-08-28 12:41:44 +07:00
hathach
502b1bdda6
more update to transaction
2023-08-27 23:45:34 +07:00
hathach
cd7464a884
try next endpoint when received NAK
2023-08-25 17:37:09 +07:00
hathach
ac00b91472
add xact_out(), xact_in() to manage transfer
2023-08-25 17:26:57 +07:00
hathach
ecf2f91042
use endpoint pool for more flexible multiple devices support
2023-08-25 16:36:28 +07:00
hathach
09ceaa6cf3
add osal mutex for spi
2023-08-25 13:18:47 +07:00
hathach
f5ebc1700f
add spi lock with interrupt enable/disable
2023-08-25 12:12:44 +07:00
hathach
e6cf125e53
save data toggle, always retry NAK. work with msc device
2023-08-24 16:46:20 +07:00
hathach
344932d27e
add tuh_max3421e_int_api(), retry control if received NAK
2023-08-24 16:27:47 +07:00
hathach
3ed5d6c372
complete enumeration
2023-08-24 16:27:12 +07:00
hathach
2c237b1ae4
able to complete 1st get device descriptor and set address
2023-08-23 17:49:28 +07:00
hathach
e3f3179924
able to get 8 byte descriptor, but read(RCVBC) always return 0
...
- rename max3421e to max3421
- fix incorrect bitmask for HCTL, fix initial device connect
- fix bus reset cause connect IRQ
2023-08-23 15:08:12 +07:00
hathach
274578ff46
able to send setup packet
2023-08-22 23:17:12 +07:00
hathach
b413439416
able to detect new device and start enumerating
2023-08-22 19:57:59 +07:00
hathach
cacc96b25d
adding connection event handling, add nrf gpio interrupt for max2341e interrupt pin
2023-08-18 17:39:10 +07:00
hathach
824e585e2b
ground works for hcd max3421e
2023-08-18 14:07:38 +07:00
hathach
9257a0f562
- update nrf52 bsp for cmake
...
- add empty tuh_int_handler/tud_int_handler if corresponidng stack not enabled
- add hcd_template.c
2023-08-18 12:48:12 +07:00
hathach
f4845e4e6c
minor comment
2023-08-16 14:43:58 +07:00
hathach
0109ffbdcb
fix abort transfer does not release endpoint, also reset state if it is control transfer
2023-08-16 14:31:14 +07:00
hathach
b3c7fe1023
clear qhd halted bit if not caused by STALL protocol, allow for next transfer
2023-08-16 11:12:00 +07:00
Ha Thach
7537985c08
Merge pull request #2222 from rppicomidi/fix-2188
...
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-15 23:33:19 +07:00
hathach
67a374d932
more rename
2023-08-15 22:57:05 +07:00
hathach
1b33a31536
more minor clean up
...
- also rename usbh_classdriver.h to usbh_pvt.h to consitent with usbd
2023-08-15 22:54:07 +07:00
rppicomidi
9d94296741
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-14 15:38:48 -07:00
tswan-quasi
b5ba12119d
UINT16_MAX stdint macro usage
2023-08-14 09:01:30 -04:00
tswan-quasi
bd51afb091
min on cdc r/w
2023-08-14 08:49:52 -04:00
Ha Thach
92457ec99f
Merge pull request #2202 from Rocky04/patch-4
...
Invoke unmounted state on configuration reset
2023-08-09 20:48:26 +07:00
Ha Thach
04f0cd5c80
Merge pull request #2209 from HiFiPhile/hitl
...
Enhance HITL test
2023-08-09 20:20:46 +07:00
hathach
b8b01c1075
update to dcd ip3511 to add work-around for lpc54628 usb hs errata USB.1 and USB.2
...
msc is mounted, but device couldn't work reliably and got constant reset
due to other errata probably.
2023-08-09 12:47:24 +07:00
hathach
6d877c3170
added cmake for lpc54, update lpc55
2023-08-08 18:50:24 +07:00
Rocky04
9602c06f8d
Correcting comments
2023-08-07 21:25:50 +02:00
Rocky04
c959e65edd
Fixing wrong callback placement
2023-08-07 21:16:41 +02:00
hathach
4938971aad
code format
2023-08-07 20:48:09 +07:00
hathach
18646179d0
fix host msc get maxlun not using aligned section memory
2023-08-07 20:48:08 +07:00
hathach
1f95a417f2
Add tuh_rhport_is_active() and tuh_rhport_reset_bus()
...
- also improve ehci bus reset
- seperate bus reset delay and contact debouncing delay in enumeration
2023-08-07 20:48:07 +07:00
Aladdin Bakosh
56e52037a8
clean(ra_hcd): fix typos in the hcd library
2023-08-04 12:00:25 +02:00
Ha Thach
1b04db2a77
Merge branch 'master' into master
2023-08-04 11:48:04 +07:00
