CTCaer
8249d9e1a2
se: Ensure aligned key/iv/ctr/hash copy
2020-12-05 20:39:17 +02:00
CTCaer
4a152504cb
Bump hekate to v5.5.0 and Nyx to v0.9.6
2020-12-02 22:34:54 +02:00
CTCaer
b8eff953c6
nyx: Utilize full shutdown based reboot for patched Erista also
2020-12-02 22:27:22 +02:00
CTCaer
cf1f94662c
sdram: Correct some dram names
2020-12-02 22:26:06 +02:00
CTCaer
d4d6730c20
fss: Disallow Mariko boot on Atmosphere< 0.17.0
...
Trying to boot on lower Atmosphere versions can have serious implications.
2020-12-02 22:03:20 +02:00
CTCaer
d287d40208
hos: Add HOS 11.0.0 support
2020-12-02 02:41:32 +02:00
CTCaer
7e5e365f18
hos: Change warmboot PA id calculation a bit
2020-12-02 02:17:41 +02:00
CTCaer
7bebec1304
hos: Change warmboot storage numbering from dec to hex
2020-12-02 02:14:06 +02:00
CTCaer
2aa1ce5390
nyx: Add eMMC and SD vendor id decoding into names
2020-12-02 02:11:22 +02:00
CTCaer
aaaf470dcf
display: Provide dsi command reading/writing to user
...
These work while video stream is either disabled or enabled.
2020-12-02 02:09:49 +02:00
CTCaer
cf175fc00d
nyx: Add alternate power saving modes
...
T210:
By default max power savings is enabled.
By changing `newpowersave=` to 0, it reverts to the old behavior of smaller power savings.
This was added to mitigate some strange DRAM chips, hanging from constant frequency change of a 800 MHz - 1600 MHz back and forth.
T210B01:
Defaults to a simple loop with no power savings. That's because of untrained ram.
2020-12-02 02:07:31 +02:00
CTCaer
c13eabcde8
sdmmc: Add T210B01 support
...
The driver was working before this, but adding the changes provides a proper and better sdmmc controller inner state.
2020-12-02 02:07:15 +02:00
CTCaer
8e45fcc069
hos: Disable stock secmon for Mariko until fixed
2020-12-02 01:56:29 +02:00
CTCaer
d1e3a0fdff
display: Add new Switch Lite panel support
2020-12-02 01:53:00 +02:00
CTCaer
19ddff299a
hos: Fix exfat FS check again..
2020-12-02 01:47:37 +02:00
CTCaer
0954eb2b09
nyx: Use full shutdown based reboot on T210B01
...
That's because of how the system is exploited.
2020-12-02 01:45:12 +02:00
CTCaer
0a9931ddb3
exo: Add exosphere fatal binary support for Mariko
...
Can be overriden with `exofatal={SD path}`.
2020-12-02 01:41:23 +02:00
CTCaer
0ccea3aa83
usb: Improve UMS ejection heuristic
2020-12-02 01:16:45 +02:00
CTCaer
a1188505e8
usb: Add XUSB support mainly for T210B01
2020-12-02 01:13:52 +02:00
CTCaer
2424ecc4f0
Disable coreboot.rom chainloading for T210B01
...
Unlike all RCM payloads that are based on hekate's hwinit, coreboot does full power management before sdram init is run.
Because of that and because it doesn't support T210B01, it does not hang as expected and configures all regulators and pins which can be dangerous!
2020-12-02 00:57:32 +02:00
CTCaer
202540c7f7
joycon: Disable driver for Switch Lite
2020-12-02 00:51:29 +02:00
CTCaer
1ceb380f6f
Add hekate loader
2020-07-04 22:12:12 +03:00
CTCaer
da0cdf1bd0
hos: Add stock secmon support for Mariko
2020-07-04 21:58:21 +03:00
CTCaer
708863358e
hos: Move warmboot patching into pkg1 object
2020-07-04 21:44:39 +03:00
CTCaer
a862b85a46
hos: Add Mariko warmboot storage and general configurator
...
The Mariko warmboot storage is needed because the warmboot exploit is not existant.
Fuses and PA id must match with the proper warmboot binary. Thus for supporting downgrades, we keep a copy of it for future use.
2020-07-04 21:43:34 +03:00
CTCaer
495907b8a4
sept: Mark as ready for Mariko
2020-07-04 21:36:37 +03:00
CTCaer
f9a1935762
nyx: Fix Dump pkg1/pkg2 and cal0 for Mariko
2020-07-04 21:36:04 +03:00
CTCaer
8ef9f888f6
hos: Add PK21 decryption support for Mariko
2020-07-04 21:35:26 +03:00
CTCaer
9b3e9724b7
hos: Add Mariko PK11 decryption and unpacking
2020-07-04 21:32:36 +03:00
CTCaer
8880dfab24
eks: Disallow on Mariko
2020-07-04 21:21:48 +03:00
CTCaer
5ffbbf40a5
hos: Add Mariko keygen
2020-07-04 21:13:25 +03:00
CTCaer
a36fec5696
clock: Lock clock to always enabled for SE in T210B01
2020-07-04 21:07:25 +03:00
CTCaer
7acad84932
nyx: Disable TSEC keys status for T210B01
2020-07-04 21:04:57 +03:00
CTCaer
8d2230dc51
fuse: Correct fuse array size for T210B01
2020-07-04 21:04:20 +03:00
CTCaer
528ddbe12c
minerva: Disable for T210B01
...
Minerva is currently unsupported for Mariko LPDDR4X.
2020-07-04 21:02:45 +03:00
CTCaer
e4c0756ded
nyx: Add DRAM names info + Mariko new ram codes
2020-06-26 22:41:34 +03:00
CTCaer
1c9efa327c
Correct RCM patched status for Mariko
...
This also disallows AutoRCM for Mariko.
2020-06-26 22:40:06 +03:00
CTCaer
fbbfeb2d1c
se: Add a T210B01 only register
2020-06-26 22:31:23 +03:00
CTCaer
ccaf49bece
display: Add T210B01 support
2020-06-26 22:29:52 +03:00
CTCaer
147fed39c8
ccplex: Add regulator for T210B01
2020-06-26 19:02:37 +03:00
CTCaer
d0a73bdc72
sc7: Add T210B01 SC7/LP0 (deep sleep) support
...
Note to future self: Almost a month passed and nothing changed, have fun cleaning that in the end...
2020-06-26 19:00:30 +03:00
CTCaer
29dc122dd4
sdram: Add T210B01 support & new LPDDR4X tables
2020-06-26 18:53:12 +03:00
CTCaer
293c47774d
fuse: Add NX hw type getter
2020-06-26 18:45:21 +03:00
CTCaer
795ed8aadc
hwinit: Add T210B01 support
2020-06-26 18:42:31 +03:00
CTCaer
377825d4fb
usb gadgets: Replace error status labels with error label and color
2020-11-26 01:58:13 +02:00
CTCaer
b89bb35054
usb: Refactor some variables
2020-11-26 01:55:33 +02:00
CTCaer
caae685fab
usb: Add buffer alignment checks
...
EDCI/EHCI controllers only allow 0x1000 aligned buffers.
So reply with a specific error type instead of a EP xfer error.
2020-11-26 01:54:10 +02:00
CTCaer
bd4517abab
usb: Name all controller errors
2020-11-26 01:50:49 +02:00
CTCaer
095b234fce
max17050: Be explicit about hardcoded calculations
2020-11-26 01:44:04 +02:00
CTCaer
b1c09f8a9c
max77620: Change try set to just retry if i2c xfer failed
2020-11-26 01:43:19 +02:00
