For now, compile only one block at time
Use tail calls to move between blocks
Fully write PPU context (except CIA)
This fixes many compatibility problems
* sys_net: don't use fds_bits from a system header on FreeBSD
rpcs3/Emu/Cell/Modules/sys_net.cpp:137:14: error: no member named '__fds_bits' in
'sys_net::fd_set'; did you mean 'fds_bits'?
if (src->fds_bits[i] & (1 << bit))
^~~~~~~~
fds_bits
/usr/include/sys/select.h:75:18: note: expanded from macro 'fds_bits'
#define fds_bits __fds_bits
^
rpcs3/Emu/Cell/Modules/sys_net.h:114:13: note: 'fds_bits' declared here
be_t<u32> fds_bits[32];
^
* GUI: fallback to xdg-open on other Unices
rpcs3/Gui/GameViewer.cpp:289:26: error: use of undeclared identifier 'command'
wxExecute(fmt::FromUTF8(command));
^
* File: FreeBSD never supported copyfile(3) but sendfile(2) works fine
Utilities/File.cpp:114:10: fatal error: 'copyfile.h' file not found
#include <copyfile.h>
^~~~~~~~~~~~
* Thread: add signal handling for BSDs
Utilities/Thread.cpp:761:23: error: use of undeclared identifier 'REG_RAX'
static const decltype(REG_RAX) reg_table[] =
^
Utilities/Thread.cpp:763:2: error: use of undeclared identifier 'REG_RAX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:11: error: use of undeclared identifier 'REG_RCX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:20: error: use of undeclared identifier 'REG_RDX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:29: error: use of undeclared identifier 'REG_RBX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:38: error: use of undeclared identifier 'REG_RSP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:47: error: use of undeclared identifier 'REG_RBP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:56: error: use of undeclared identifier 'REG_RSI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:65: error: use of undeclared identifier 'REG_RDI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:764:2: error: use of undeclared identifier 'REG_R8'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:10: error: use of undeclared identifier 'REG_R9'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:18: error: use of undeclared identifier 'REG_R10'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:27: error: use of undeclared identifier 'REG_R11'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:36: error: use of undeclared identifier 'REG_R12'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:45: error: use of undeclared identifier 'REG_R13'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:54: error: use of undeclared identifier 'REG_R14'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:63: error: use of undeclared identifier 'REG_R15'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:72: error: use of undeclared identifier 'REG_RIP'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:792:26: error: no member named 'gregs' in '__mcontext'
const u64 reg_value = *X64REG(context, reg - X64R_RAX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:804:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AL));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:809:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AH) >> 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:815:31: error: no member named 'gregs' in '__mcontext'
const s8 imm_value = *(s8*)(RIP(context) + i_size - 1);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:827:33: error: no member named 'gregs' in '__mcontext'
const s16 imm_value = *(s16*)(RIP(context) + i_size - 2);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:836:33: error: no member named 'gregs' in '__mcontext'
const s32 imm_value = *(s32*)(RIP(context) + i_size - 4);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:846:20: error: no member named 'gregs' in '__mcontext'
out_value = (u32)RCX(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:779:18: note: expanded from macro 'RCX'
#define RCX(c) (*X64REG((c), 1))
^~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: no member named 'gregs' in '__mcontext'
const u32 _cf = EFLAGS(context) & 0x1;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:852:19: error: no member named 'gregs' in '__mcontext'
const u32 _zf = EFLAGS(context) & 0x40;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:852:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:853:19: error: no member named 'gregs' in '__mcontext'
const u32 _sf = EFLAGS(context) & 0x80;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:853:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:854:19: error: no member named 'gregs' in '__mcontext'
const u32 _of = EFLAGS(context) & 0x800;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:854:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:855:19: error: no member named 'gregs' in '__mcontext'
const u32 _pf = EFLAGS(context) & 0x4;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:855:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:885:12: error: no member named 'gregs' in '__mcontext'
case 1: *X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, re...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:885:62: error: no member named 'gregs' in '__mcontext'
...*X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, reg - X64R_RAX) & 0xffffff...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:12: error: no member named 'gregs' in '__mcontext'
case 2: *X64REG(context, reg - X64R_RAX) = value & 0xffff | *X64REG(context, ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:64: error: no member named 'gregs' in '__mcontext'
...reg - X64R_RAX) = value & 0xffff | *X64REG(context, reg - X64R_RAX) & 0xffff0000; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:887:12: error: no member named 'gregs' in '__mcontext'
case 4: *X64REG(context, reg - X64R_RAX) = value & 0xffffffff; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:888:12: error: no member named 'gregs' in '__mcontext'
case 8: *X64REG(context, reg - X64R_RAX) = value; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x1; // set CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:917:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x1; // clear CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:917:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:922:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x40; // set ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:922:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:926:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x40; // clear ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:926:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:931:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x80; // set SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:931:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:935:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x80; // clear SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:935:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:940:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x800; // set OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:940:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:944:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x800; // clear OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:944:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:953:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x4; // set PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:953:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:957:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x4; // clear PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:957:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:962:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x10; // set AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:962:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:966:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x10; // clear AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:966:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:976:7: error: no member named 'gregs' in '__mcontext'
if (EFLAGS(context) & 0x400 /* direction flag */)
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:976:7: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:1020:25: error: no member named 'gregs' in '__mcontext'
auto code = (const u8*)RIP(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1146:3: error: no member named 'gregs' in '__mcontext'
RIP(context) += i_size;
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:47: error: no member named 'gregs' in '__mcontext'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:53: error: use of undeclared identifier 'REG_ERR'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
^
Utilities/Thread.cpp:1393:89: error: no member named 'gregs' in '__mcontext'
...%s location %p at %p.", cause, info->si_addr, RIP(context)));
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
* Thread: add explict casts for incomplete pthread_t on some platforms
Utilities/Thread.cpp:1467:17: error: no viable overloaded '='
ctrl->m_thread = thread;
~~~~~~~~~~~~~~ ^ ~~~~~~
Utilities/Atomic.h:776:12: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const atomic_t<unsigned long>' for 1st
argument
atomic_t& operator =(const atomic_t&) = delete;
^
Utilities/Atomic.h:902:7: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const type' (aka 'const unsigned long') for
1st argument
type operator =(const type& rhs)
^
Utilities/Thread.cpp:1656:3: error: no matching function for call to 'pthread_detach'
pthread_detach(m_thread.raw());
^~~~~~~~~~~~~~
/usr/include/pthread.h:218:6: note: candidate function not viable: no known conversion from 'type'
(aka 'unsigned long') to 'pthread_t' (aka 'pthread *') for 1st argument
int pthread_detach(pthread_t);
^
* build: dlopen() maybe in libc
/usr/bin/ld: cannot find -ldl
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: iconv() maybe available on some BSDs in libc
/usr/bin/ld: cannot find -liconv
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: hidapi-hidraw is only built on Linux
/usr/bin/ld: cannot find -lhidapi-hidraw
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* Thread: use getrusage() on more POSIX-like systems
* Qt: don't return NULL handle on other platforms
rpcs3/rpcs3qt/gs_frame.cpp:120:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
* build: properly disable Vulkan on other platforms
In file included from rpcs3/rpcs3_app.cpp:40:
In file included from rpcs3/Emu/RSX/VK/VKGSRender.h:3:
rpcs3/Emu/RSX/VK/VKHelpers.h:1209:42: error: unknown type name 'device_queues'
std::vector<VkBool32> supportsPresent(device_queues);
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1211:4: error: expected member name or ';' after declaration specifiers
for (u32 index = 0; index < device_queues; index++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1221:4: error: expected member name or ';' after declaration specifiers
for (u32 i = 0; i < device_queues; i++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1256:4: error: expected member name or ';' after declaration specifiers
if (graphicsQueueNodeIndex != presentQueueNodeIndex)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1261:4: error: expected member name or ';' after declaration specifiers
CHECK_RESULT(vkGetPhysicalDeviceSurfaceFormatsKHR(dev, surface, &formatCount, nullptr));
^
[...]
/usr/bin/ld: cannot find -lvulkan
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: make install/strip work by moving commands
* Qt: create surface for GL context if it wasn't ready
#0 strlen (str=0x0) at /usr/src/lib/libc/string/strlen.c:100
#1 0x000000000090f02e in std::__1::char_traits<char>::length (__s=0x0)
at /usr/include/c++/v1/__string:215
#2 std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::basic_string (__s=0x0, this=<optimized out>) at /usr/include/c++/v1/string:1547
#3 gl::capabilities::initialize (this=0x2ba32a0 <gl::g_driver_caps>)
at rpcs3/Emu/RSX/GL/GLHelpers.h:133
#4 0x000000000090d3dd in gl::get_driver_caps () at rpcs3/Emu/RSX/GL/GLHelpers.cpp:56
#5 0x00000000008fa511 in GLGSRender::on_init_thread (this=0x838d30018)
at rpcs3/Emu/RSX/GL/GLGSRender.cpp:484
#6 0x0000000000938f9e in rsx:🧵:on_task (this=0x838d30018)
at rpcs3/Emu/RSX/RSXThread.cpp:334
#7 0x0000000000abc329 in task_stack::task_type<named_thread::start_thread(std::__1::shared_ptr<void> const&)::$_10>::invoke() ()
#8 0x0000000000abc114 in thread_ctrl::start(std::__1::shared_ptr<thread_ctrl> const&, task_stack)::$_7::__invoke(void*) ()
#9 0x0000000801e60c35 in thread_start (curthread=0x843650a00)
at /usr/src/lib/libthr/thread/thr_create.c:289
#10 0x0000000000000000 in ?? ()
* build: don't abort without git metadata
-- Found Git: /usr/local/bin/git (found version "2.13.1")
fatal: Not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Warning at git-version.cmake:12 (message):
git rev-list failed, unable to include version.
* build: non-parallel needs git-version.h earlier
rpcs3/rpcs3_version.cpp:3:10: fatal error: 'git-version.h' file not found
#include "git-version.h"
^~~~~~~~~~~~~~~
1 error generated.
* PPUInterpreter: Fix undefined behavior of rol8 and rol16 with inline assembly
* PPUInterpreter: Fix undefined behavior of rol32 and rol64
* PPUInterpreter: Change left rotate functions to inline functions and move to types.h
