1
0
mirror of https://github.com/CTCaer/hekate.git synced 2024-12-25 15:17:19 +00:00
hekate/README.md

143 lines
9.3 KiB
Markdown

# hekate - CTCaer mod
![Image of Hekate](https://user-images.githubusercontent.com/3665130/60391760-bc1e8c00-9afe-11e9-8b7a-b065873081b2.png)
Custom Nintendo Switch bootloader, firmware patcher, and more.
## Bootloader folders and files
| Folder/File | Description |
| ------------------------ | --------------------------------------------------------------------- |
| bootloader | Main folder. |
| \|__ bootlogo.bmp | It is used when custom is on and no logopath found. Can be skipped. |
| \|__ hekate_ipl.ini | Main bootloader configuration and boot entries. |
| \|__ patches.ini | Add external patches. Can be skipped. A template can be found [here](./res/patches_template.ini) |
| \|__ update.bin | If newer, it is loaded at boot. For modchips. Auto updated. Can be skipped. |
| bootloader/ini/ | For individual inis. 'More configs...' menu. Autoboot is supported. |
| bootloader/res/ | Nyx user resources. Icons and more. |
| \|__ background.bmp | Nyx - custom background. |
| \|__ icon_switch.bmp | Nyx - Default icon for CFWs. |
| \|__ icon_payload.bmp | Nyx - Default icon for Payloads. |
| \|__ icon_lakka.bmp | Nyx - Default icon for Lakka. |
| bootloader/sys/ | For system modules. |
| \|__ emummc.kipm | emuMMC KIP1 module. Important! |
| \|__ libsys_lp0.bso | LP0 (sleep mode) module. Important! |
| \|__ libsys_minerva.bso | Minerva Training Cell. Used for DRAM Frequency training. Important! |
| \|__ nyx.bin | Nyx - Our GUI. Important! |
| \|__ res.pak | Nyx resources package. Important! |
| bootloader/screenshots/ | Folder where Nyx screenshots are saved |
| bootloader/payloads/ | For payloads. 'Payloads...' menu. Autoboot only supported by including them into an ini. All CFW bootloaders, tools, Linux payloads are supported. |
| bootloader/libtools/ | Future reserved |
**Note**: Sept files for booting 7.0.0 and up are expected at /sept folder at root of sd card.
## Bootloader configuration
The bootloader can be configured via 'bootloader/hekate_ipl.ini' (if it is present on the SD card). Each ini section represents a boot entry, except for the special section 'config' that controls the global configuration.
There are four possible type of entries. "**[ ]**": Boot entry, "**{ }**": Caption, "**#**": Comment, "*newline*": .ini cosmetic newline.
You can find a template [Here](./res/hekate_ipl_template.ini)
### Global Configuration keys/values when boot entry is **config**:
| Config option | Description |
| ------------------ | ---------------------------------------------------------- |
| autoboot=0 | 0: Disable, #: Boot entry number to auto boot. |
| autoboot_list=0 | 0: Read `autoboot` boot entry from hekate_ipl.ini, 1: Read from ini folder (ini files are ASCII ordered). |
| bootwait=3 | 0: Disable (It also disables bootlogo. Having **VOL-** pressed since injection goes to menu.), #: Time to wait for **VOL-** to enter menu. |
| verification=2 | 0: Disable Backup/Restore verification, 1: Sparse (block based, fast and not 100% reliable), 2: Full (sha256 based, slow and 100% reliable). |
| autohosoff=1 | 0: Disable, 1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely, 2: No logo, immediately powers off.|
| autonogc=1 | 0: Disable, 1: Automatically applies nogc patch if unburnt fuses found and a >= 4.0.0 HOS is booted. |
| updater2p=0 | 0: Disable, 1: Force updates (if needed) the reboot2payload binary to be hekate. |
| backlight=100 | Screen backlight level. 0-255. |
### Possible boot entry key/value combinations:
| Config option | Description |
| ---------------------- | ---------------------------------------------------------- |
| warmboot={SD path} | Replaces the warmboot binary |
| secmon={SD path} | Replaces the security monitor binary |
| kernel={SD path} | Replaces the kernel binary |
| kip1={SD path} | Replaces/Adds kernel initial process. Multiple can be set. |
| kip1={SD folder}/* | Loads every .kip/.kip1 inside a folder. Compatible with single kip1 keys. |
| fss0={SD path} | Takes a fusee-secondary binary and `extracts` all needed parts from it. |
| kip1patch=patchname | Enables a kip1 patch. Specify with multiple lines and/or as CSV. If not found, an error will show up |
| fullsvcperm=1 | Disables SVC verification (full services permission) |
| debugmode=1 | Enables Debug mode. Obsolete when used with exosphere as secmon. |
| atmosphere=1 | Enables Atmosphère patching. |
| nouserexceptions=1 | Disables usermode exception handlers when paired with Exosphère. |
| userpmu=1 | Allows user access to PMU when paired with Exosphère. |
| emummc_force_disable=1 | Disabled emuMMC if it's enabled. |
| stock=1 | Disables unneeded kernel patching when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required to run completely stock. |
| id=idname | Identifies boot entry for forced boot via id. Max 7 chars. |
| payload={SD path} | Payload launching. Tools, Linux, CFW bootloaders, etc. |
| logopath={SD path} | If no logopath, `bootloader/bootlogo.bmp` will be used if exists. If logopath exists, it will load the specified bitmap. |
| icon={SD path} | Force Nyx to use the icon defined here. If this is not found, it will check for a bmp named as the boot entry ([Test 2] -> `bootloader/res/Test 2.bmp`). Otherwise default will be used. |
**Note1**: When using the wildcard (`/*`) with `kip1` you can still use the normal `kip1` after that to load extra single kips.
**Note2**: When using FSS0 it parses exosphere, warmboot and all core kips. You can override the first 2 by using `secmon`/`warmboot` after defining `fss0`.
You can define `kip1` to load an extra kip or many via the wildcard (`/*`) usage.
**Warning**: Never define *fss0 core* kips when using `fss0` and make sure that the folder (when using `/*`), does not include them.
This is in case the kips are incompatible between them. If compatible, you can override `fss0` kips with no issues (useful for testing with intermediate kip changes).
### Payload storage:
hekate has a boot storage in the binary that helps it configure it outside of BPMP enviroment:
| Offset / Name | Description |
| -------------------- | ----------------------------------------------------------------- |
| '0x94' boot_cfg | bit0: Force AutoBoot, bit1: Show launch log, bit2: Boot from ID, bit7: sept run. |
| '0x95' autoboot | If `Force AutoBoot`: 0: Force go to menu, else boot that entry. |
| '0x96' autoboot_list | If `Force AutoBoot` and `autoboot` then it boots from ini folder. |
| '0x97' extra_cfg | bit7: Force Nyx to run `Dump pkg1/2`. |
| '0x98' id[8] | When Boot from ID is set, it will search all inis automatically and find the boot entry with that id and boot it. Must be NULL terminated. |
| '0x98' xt_str[128] | Depends on the set cfg bits. |
If the main .ini is not found, it is created on the first hekate boot.
```
hekate (C) 2018 naehrwert, st4rk
CTCaer mod (C) 2018 CTCaer.
Thanks to: derrek, nedwill, plutoo, shuffle2, smea, thexyz, yellows8.
Greetings to: fincs, hexkyz, SciresM, Shiny Quagsire, WinterMute.
Open source and free packages used:
- FatFs R0.13a, Copyright (C) 2017, ChaN
- bcl-1.2.0, Copyright (C) 2003-2006, Marcus Geelnard
- Atmosphère (Exosphere types/panic, prc id kernel patches),
Copyright (C) 2018-2019, Atmosphère-NX
- elfload, Copyright (C) 2014 Owen Shepherd, Copyright (C) 2018 M4xw
___
.-' `'.
/ \
| ;
| | ___.--,
_.._ |0) = (0) | _.---'`__.-( (_.
__.--'`_.. '.__.\ '--. \_.-' ,.--'` `""`
( ,.--'` ',__ /./; ;, '.__.'` __
_`) ) .---.__.' / | |\ \__..--"" """--.,_
`---' .'.''-._.-'`_./ /\ '. \ _.--''````'''--._`-.__.'
| | .' _.-' | | \ \ '. `----`
\ \/ .' \ \ '. '-._)
\/ / \ \ `=.__`'-.
/ /\ `) ) / / `"".`\
, _.-'.'\ \ / / ( ( / /
`--'` ) ) .-'.' '.'. | (
(/` ( (` ) ) '-; [switchbrew]
```