CTCaer 39c614a3ab bdk: hwinit: move sd2 to hw init ...

SD2 powers LDO0/1/8 on T210B01 so there's no need to be in display init.
Also there's not need to power it down first so configure it in one go.

2024-06-05 01:33:15 +03:00

..

actmon.c

bdk: actmon: switch to averaged sampling

2023-12-25 03:46:05 +02:00

actmon.h

bdk: add activity monitor driver

2022-01-20 12:32:02 +02:00

bpmp.c

bdk: use static where it should

2024-06-02 07:09:34 +03:00

bpmp.h

bdk: use static where it should

2024-06-02 07:09:34 +03:00

ccplex.c

bdk: clock: use real source clock dividers

2024-03-13 02:01:01 +02:00

ccplex.h

bdk: ccplex: add no rst vector lock & powergating

2024-03-13 01:37:52 +02:00

clock.c

bdk: clock: always set DISPA source

2024-06-02 08:00:42 +03:00

clock.h

bdk: clock: use real source clock dividers

2024-03-13 02:01:01 +02:00

fuse.c

bdk: fuse: simplify idle wait

2023-12-25 03:47:26 +02:00

fuse.h

bdk: fuse: simplify idle wait

2023-12-25 03:47:26 +02:00

gpio.c

bdk: gpio: add debounce set function

2023-03-31 07:43:16 +03:00

gpio.h

bdk: gpio: add debounce set function

2023-03-31 07:43:16 +03:00

hw_init.c

bdk: hwinit: move sd2 to hw init

2024-06-05 01:33:15 +03:00

hw_init.h

bdk: hwinit: rename reinit_workaround to deinit

2024-05-19 10:49:25 +03:00

i2c.c

bdk: i2c: fix stack buffer overflow

2023-08-07 21:02:20 +03:00

i2c.h

i2c: Fix packet mode

2020-10-20 10:37:33 +03:00

irq.c

bdk: irq: remove ack source

2024-06-02 07:46:18 +03:00

irq.h

bdk: add several defines

2023-12-25 04:08:34 +02:00

kfuse.c

Utilize hekate's BDK for hekate main and Nyx

2020-06-14 16:45:45 +03:00

kfuse.h

Utilize BIT macro everywhere

2020-11-26 01:41:45 +02:00

pinmux.c

bdk: pinmux: add i2s pin config

2024-04-25 04:52:13 +03:00

pinmux.h

bdk: pinmux: add i2s pin config

2024-04-25 04:52:13 +03:00

pmc_lp0_t210.h

Utilize hekate's BDK for hekate main and Nyx

2020-06-14 16:45:45 +03:00

pmc.c

bdk: pmc: extend pmc scratch locker

2022-10-11 14:41:42 +03:00

pmc.h

bdk: add several defines

2023-12-25 04:08:34 +02:00

t210.h

bdk: use static where it should

2024-06-02 07:09:34 +03:00

timer.c

bdk: timer: add instruction sleep

2023-06-09 10:33:11 +03:00

timer.h

bdk: timer: add instruction sleep

2023-06-09 10:33:11 +03:00

uart.c

bdk: t210: add more mmio addresses

2023-07-31 16:59:15 +03:00

uart.h

uart: rename print to printf

2022-06-25 05:42:42 +03:00