This disables low battery monitor shutdown (LBM shutdown) on boot and checks if battery is enough.
The logic is as follows:
If battery is not enough:
- If not charging and 15s pass, it will re enable LBM shutdown and power off.
- If charging, it will wait until it is charged above the limit.
Screen will auto turn off to save power. A press on Power button or a change on charger, will enable it for another 15s.
If battery is enough:
- Enables LBM shutdown and continues with the boot process.
Fixes a hang caused when rebooting 2 payload from L4T with old hekate in vendor partition.
L4T does not overwrite the nyx storage where the Minerva configuration is stored.
This makes new Minerva parse the wrong tables from old hekate and eventually hang the RAM, which causes an exception on BPMP.
3 users had issues with 602MHz.
This will probably bring the SoC binning compatibility to 100%.
Additionally, make it easy to change default boost frequency.
The tiny loss in perf, will be mitigated in Nyx. (It's actually even faster)
There's an increasing ammount of users that kill their batteries when forgetting their devices into AutoRCM / RCM mode.
This will now force a shutdown the moment the battery reaches 2.8V. Even if device is inside RCM mode.
Notice: We might need to increase the limit.
Tsec keys function always disabled host1x clock after running.
This interferes with display interface and disables further window frame syncing.
Display_end code already handles disable and reset of said clock.
It also fixes an ancient bug that was mitigated by removing the 5 frame sync on HOST1X_SYNC_SYNCPT_9 at channel 0:
5fd9daa364 (diff-6b0c56eab8515465d559ff0ea73a22c3L152)
Some Sandisk U1 sd cards do not behave nicely if they power cycle too fast. A min 100ms wait, is enough to mitigate that.
Fortunately, because of how the code paths are structured, this was never hit.
- Make debugmode for exosphere mandatory
- Support dev RSA modulus for warmboot
- Fix a critical bug where it allowed free() to be used on a non-heap address.
- Better the makefile
