CTCaer
52bb6a96e5
bdk: nx emmc bis: fix out of cluster bounds accesses
2022-01-29 01:40:38 +02:00
CTCaer
6666dd4b46
bdk: fatfs: better PrFILE2 SAFE record creation
2022-01-29 01:40:05 +02:00
CTCaer
3fdb72ce37
bdk: i2c: correct order of spinlock wait
2022-01-29 01:34:01 +02:00
CTCaer
9a80f8b4b5
bdk: minerva: fix fsp op/wr check for l4t
2022-01-29 01:31:28 +02:00
CTCaer
ef5790cc2c
bdk: mc: always on ahb arbitration
...
- Removed disables
- SDMMC code now just checks if it has access
2022-01-29 01:29:02 +02:00
CTCaer
7bb8b1da62
di: restore window config wait for inv pitch and block linear
2022-01-29 01:26:00 +02:00
CTCaer
192a936a31
bdk: add NX eMMC BIS driver
2022-01-20 13:21:04 +02:00
CTCaer
8327de8e2e
bdk: replace NYX flag with proper flags
...
- BDK_MINERVA_CFG_FROM_RAM: enables support for getting minerva configuration from nyx storage
- BDK_HW_EXTRA_DEINIT: enables extra deinit in hw_reinit_workaround
- BDK_SDMMC_OC_AND_EXTRA_PRINT: enables eMMC OC support (533 MB/s) and extra error printing
2022-01-20 13:19:48 +02:00
CTCaer
960f3b23e7
bdk: ums: adhere to emmc ops changes also
2022-01-20 13:17:55 +02:00
CTCaer
b08e36a7b0
bdk: add emmc ops
...
- Add support for lower eMMC bus speed init in case of failures
- Add error count reporting
- Function names and defines changed from nx_emmc to emmc (except autorcm helper function)
- Enabling emuMMC support needs BDK_EMUMMC_ENABLE flag passed over
2022-01-20 13:14:38 +02:00
CTCaer
00110a8863
bdk: move sd ops into bdk
2022-01-20 12:48:41 +02:00
CTCaer
7ae4fd03c2
bdk: minerva: prep for ATF direct boot support
2022-01-20 12:43:24 +02:00
CTCaer
e071fe44b0
bdk: ini: reduce heap fragmentation/pressure
2022-01-20 12:41:20 +02:00
CTCaer
39d411dc68
bdk: uart: add uart va print
2022-01-20 12:39:32 +02:00
CTCaer
82f90fae28
bdk: utils: add vprintf
2022-01-20 12:37:41 +02:00
CTCaer
10e1f67dc5
bdk: utils: add strcpy with head/tail whitespace removal
2022-01-20 12:36:25 +02:00
CTCaer
10b479dc1c
bdk: clock: add apb/ahb clock control
2022-01-20 12:32:57 +02:00
CTCaer
3dd12321f8
bdk: add activity monitor driver
2022-01-20 12:32:02 +02:00
CTCaer
c1441a64c7
bdk: se: expose xts functions and add nx xts
2022-01-20 12:28:26 +02:00
CTCaer
0e35e68fd5
bdk: se: add t210b01 data coherency WAR
2022-01-20 12:27:25 +02:00
CTCaer
853f10f774
bdk: pmc: update tzram defines
2022-01-20 12:13:35 +02:00
CTCaer
4628ee6dc5
bdk: di: window fb changes
...
- Get fb address from in window regs
- Remove 2 frames wait
2022-01-20 12:12:19 +02:00
CTCaer
3bb46c6470
bdk: di: allocate fifo buffer once
2022-01-20 12:09:29 +02:00
CTCaer
5e6a7c486b
bdk: btn: enable HOME button as input
2022-01-16 01:05:42 +02:00
CTCaer
1a9c6bf983
bdk: correct reg init as per TRM
2022-01-16 01:04:52 +02:00
CTCaer
70504c295e
bdk: various functionality independent changes
2022-01-16 01:03:24 +02:00
CTCaer
a5cd962f99
bdk: add global header
2022-01-15 23:58:27 +02:00
CTCaer
4d91d2baff
bdk: fan: clamp duty before checking if the same
2021-10-26 10:53:22 +03:00
CTCaer
981c986b3f
bdk: sdram: name the new micron modules
2021-10-19 09:13:14 +03:00
CTCaer
09b3e47ac8
bdk: touch: rename samsung touch panel
2021-10-19 09:11:58 +03:00
CTCaer
31d6c7d85d
bdk: reg 5v: fix a hang with T210B01 and Hoag/Aula
...
- Hoag and Aula do not have a USB based 5V bus source, so do not touch CC4 pin.
- More importantly, in T210B01 the GPIO AO IO rail seems to be working properly from boot.
Plus it also seems that is needed by various components.
That was found when running on Aula. It was causing an immediate hang. Probably SoC wide.
Only allow control of it on T210 to avoid such issues.
2021-10-15 16:26:11 +03:00
CTCaer
9a17ca2628
bdk: disable fan control on Hoag and Aula
...
TODO: Add support for them.
These use a different way to init/control fan.
2021-10-15 16:19:16 +03:00
CTCaer
49bcaf3914
bdk: correct some types and warnings
2021-10-15 16:18:06 +03:00
CTCaer
82d0346615
bdk: fatfs: remove errors that depend on full diskio
2021-10-15 16:17:08 +03:00
CTCaer
808da1bce0
bdk: di: adjust OLED panel brightness curve
...
The Samsung AMOLED panel least legible backlight is at a high duty (45 / 255).
Change the linear curve to a more appropriate one.
2021-10-15 16:16:24 +03:00
CTCaer
6992ece762
bdk: touch: add samsung touch model name
2021-10-15 16:09:25 +03:00
CTCaer
681182540e
bdk: di: add model name for the samsung panel
2021-10-15 16:07:18 +03:00
CTCaer
c801ef8dda
bdk: use size defines where applicable
2021-10-01 15:03:18 +03:00
CTCaer
7e4c71748f
bdk: types: refactor and add size defines
2021-10-01 14:33:55 +03:00
CTCaer
a1910156d8
bdk: hwinit: save boot reason for later usage
2021-10-01 14:32:42 +03:00
CTCaer
99d15eaac8
bdk: fatfs: check if string is null for puts/printf
...
Avoid writing garbage to a file by checking string pointer passed to f_puts and f_printf.
Important on many embedded platforms that do not abort on NULL dereference.
2021-10-01 14:27:57 +03:00
CTCaer
7fb10b0242
sdram: fix building for embedded lp0 config
2021-09-17 23:17:56 +03:00
CTCaer
bcec028b0f
clock: update device frequency getter function
...
- Add missing write commits
- Remove hardcoded values
2021-09-17 23:16:43 +03:00
CTCaer
8f9d52aa89
clock: move pllx enable to clock object
2021-09-17 23:13:53 +03:00
CTCaer
d368b93fdd
sdmmc: move error prints checks inside ifdefs
2021-09-17 23:12:54 +03:00
CTCaer
d5322f384b
tsec: make sure cpu power rails are off
2021-09-17 23:10:57 +03:00
CTCaer
03d027615c
sdram: update config for t210b01 (unused)
2021-09-17 23:09:33 +03:00
CTCaer
e9edcfeeb0
bdk: remove all references and defines to sept
2021-08-28 17:10:21 +03:00
CTCaer
4b7e1f699d
ums/xusb: do not allow multiple CBW requests
...
On XUSB do not allow multiple requests for CBW to be done.
This avoids an issue with some XHCI controllers and OS combos (e.g. ASMedia and Linux/Mac OS) which confuse that and concatenate an old CBW request with another write request (SCSI Write) and create a babble error (transmit overflow).
2021-08-28 17:09:38 +03:00
CTCaer
134f3dac52
ums: add warn reporting to log status
...
Some OSes do not adhere to limits reported by UMS gadget to them.
In such cases, make sure that user is notified about their host skipping the checks and sending "illegal" commands.
2021-08-28 17:08:15 +03:00
