CTCaer
0a9931ddb3
exo: Add exosphere fatal binary support for Mariko
...
Can be overriden with `exofatal={SD path}`.
2020-12-02 01:41:23 +02:00
CTCaer
0ccea3aa83
usb: Improve UMS ejection heuristic
2020-12-02 01:16:45 +02:00
CTCaer
a1188505e8
usb: Add XUSB support mainly for T210B01
2020-12-02 01:13:52 +02:00
CTCaer
2424ecc4f0
Disable coreboot.rom chainloading for T210B01
...
Unlike all RCM payloads that are based on hekate's hwinit, coreboot does full power management before sdram init is run.
Because of that and because it doesn't support T210B01, it does not hang as expected and configures all regulators and pins which can be dangerous!
2020-12-02 00:57:32 +02:00
CTCaer
202540c7f7
joycon: Disable driver for Switch Lite
2020-12-02 00:51:29 +02:00
CTCaer
1ceb380f6f
Add hekate loader
2020-07-04 22:12:12 +03:00
CTCaer
da0cdf1bd0
hos: Add stock secmon support for Mariko
2020-07-04 21:58:21 +03:00
CTCaer
708863358e
hos: Move warmboot patching into pkg1 object
2020-07-04 21:44:39 +03:00
CTCaer
a862b85a46
hos: Add Mariko warmboot storage and general configurator
...
The Mariko warmboot storage is needed because the warmboot exploit is not existant.
Fuses and PA id must match with the proper warmboot binary. Thus for supporting downgrades, we keep a copy of it for future use.
2020-07-04 21:43:34 +03:00
CTCaer
495907b8a4
sept: Mark as ready for Mariko
2020-07-04 21:36:37 +03:00
CTCaer
f9a1935762
nyx: Fix Dump pkg1/pkg2 and cal0 for Mariko
2020-07-04 21:36:04 +03:00
CTCaer
8ef9f888f6
hos: Add PK21 decryption support for Mariko
2020-07-04 21:35:26 +03:00
CTCaer
9b3e9724b7
hos: Add Mariko PK11 decryption and unpacking
2020-07-04 21:32:36 +03:00
CTCaer
8880dfab24
eks: Disallow on Mariko
2020-07-04 21:21:48 +03:00
CTCaer
5ffbbf40a5
hos: Add Mariko keygen
2020-07-04 21:13:25 +03:00
CTCaer
a36fec5696
clock: Lock clock to always enabled for SE in T210B01
2020-07-04 21:07:25 +03:00
CTCaer
7acad84932
nyx: Disable TSEC keys status for T210B01
2020-07-04 21:04:57 +03:00
CTCaer
8d2230dc51
fuse: Correct fuse array size for T210B01
2020-07-04 21:04:20 +03:00
CTCaer
528ddbe12c
minerva: Disable for T210B01
...
Minerva is currently unsupported for Mariko LPDDR4X.
2020-07-04 21:02:45 +03:00
CTCaer
e4c0756ded
nyx: Add DRAM names info + Mariko new ram codes
2020-06-26 22:41:34 +03:00
CTCaer
1c9efa327c
Correct RCM patched status for Mariko
...
This also disallows AutoRCM for Mariko.
2020-06-26 22:40:06 +03:00
CTCaer
fbbfeb2d1c
se: Add a T210B01 only register
2020-06-26 22:31:23 +03:00
CTCaer
ccaf49bece
display: Add T210B01 support
2020-06-26 22:29:52 +03:00
CTCaer
147fed39c8
ccplex: Add regulator for T210B01
2020-06-26 19:02:37 +03:00
CTCaer
d0a73bdc72
sc7: Add T210B01 SC7/LP0 (deep sleep) support
...
Note to future self: Almost a month passed and nothing changed, have fun cleaning that in the end...
2020-06-26 19:00:30 +03:00
CTCaer
29dc122dd4
sdram: Add T210B01 support & new LPDDR4X tables
2020-06-26 18:53:12 +03:00
CTCaer
293c47774d
fuse: Add NX hw type getter
2020-06-26 18:45:21 +03:00
CTCaer
795ed8aadc
hwinit: Add T210B01 support
2020-06-26 18:42:31 +03:00
CTCaer
377825d4fb
usb gadgets: Replace error status labels with error label and color
2020-11-26 01:58:13 +02:00
CTCaer
b89bb35054
usb: Refactor some variables
2020-11-26 01:55:33 +02:00
CTCaer
caae685fab
usb: Add buffer alignment checks
...
EDCI/EHCI controllers only allow 0x1000 aligned buffers.
So reply with a specific error type instead of a EP xfer error.
2020-11-26 01:54:10 +02:00
CTCaer
bd4517abab
usb: Name all controller errors
2020-11-26 01:50:49 +02:00
CTCaer
095b234fce
max17050: Be explicit about hardcoded calculations
2020-11-26 01:44:04 +02:00
CTCaer
b1c09f8a9c
max77620: Change try set to just retry if i2c xfer failed
2020-11-26 01:43:19 +02:00
CTCaer
cabaa6cfb8
Utilize BIT macro everywhere
2020-11-26 01:41:45 +02:00
CTCaer
94486873c1
di: Skip panel deinit if DI was not properly deinit'ed
2020-11-26 01:12:44 +02:00
CTCaer
89a4eadab0
sdmmc: Refactor some names
2020-11-26 01:08:42 +02:00
CTCaer
55395ea4fd
sdmmc: Correct bus speed for SDR25
...
Fix bus speed on SDR25 even if all UHS cards support SDR50 and SDR104.
2020-11-15 15:11:19 +02:00
CTCaer
4166a3c128
sdmmc: Add more debugging
2020-11-15 15:08:53 +02:00
CTCaer
cabb8cd33a
Allow booting on damaged fuel gauge
2020-11-15 14:49:54 +02:00
CTCaer
ab7a81081c
t210: Refactor AHB Gizmo registers
2020-11-15 14:46:42 +02:00
CTCaer
8a352bdfe2
usb: Split init into PHY init and device init
2020-11-15 14:45:48 +02:00
CTCaer
721e926a75
usb: Do proper UTMIPLL_HW_PWRDN_CFG0 config
2020-11-15 14:44:35 +02:00
CTCaer
0b314d7f21
clock: Move UTMIPLL init from USB to clock
2020-11-15 14:43:36 +02:00
CTCaer
8305058cf5
clock: Move PLLU init/deinit from USB to clock
2020-11-15 14:42:01 +02:00
CTCaer
6dddb968fa
usb: Fix various descriptor transfers in order to not rely on quirks
2020-11-15 14:38:18 +02:00
CTCaer
d3c318d0c9
usb: Correct latencies for HID gadgets
2020-11-15 14:37:14 +02:00
CTCaer
604ec4416d
usb: Refactor driver names and defines
2020-11-15 14:36:20 +02:00
CTCaer
c7fcea5f35
usb: Rfactor driver/gadgets in prep for XUSB
...
Allow gadgets using different USB controllers on demand.
This will allow plugging in XUSB for Mariko usage.
2020-11-15 14:30:25 +02:00
CTCaer
a84f1e5ee5
usb: Split descriptors to object and header
2020-11-15 14:10:00 +02:00
