2.9 KiB
BTstack Port for POSIX Systems with Intel Wireless 8260/8265 Controllers
Same as port/libusb, but customized for Intel Wireless 8260 and 8265 Controllers. These controller require firmware upload and configuration to work. Firmware and config is downloaded from the Linux firmware repository.
Compilation
Requirements:
On a recent Debian-based system, all you need is:
apt-get install gcc git libusb-1.0 pkg-config
When everything is ready, you compile all examples with:
make
Environment
On Linux, the USB Bluetooth dongle is usually not accessible to a regular user. You can either:
- run the examples as root
- add a udev rule for your dongle to extend access rights to user processes
To add an udev rule, please create /etc/udev/rules.d/btstack.rules and add this
# Match all devices from CSR
SUBSYSTEM=="usb", ATTRS{idVendor}=="0a12", MODE="0666"
# Match DeLOCK Bluetooth 4.0 dongle
SUBSYSTEM=="usb", ATTRS{idVendor}=="0a5c", ATTRS{device}=="21e8", MODE="0666"
# Match Asus BT400
SUBSYSTEM=="usb", ATTRS{idVendor}=="0b05", ATTRS{device}=="17cb", MODE="0666"
# Match Laird BT860 / Cypress Semiconductor CYW20704A2
SUBSYSTEM=="usb", ATTRS{idVendor}=="04b4", ATTRS{device}=="f901", MODE="0666"
# Match Intel Wireless 8260 8265
SUBSYSTEM=="usb", ATTRS{idVendor}=="8027", ATTRS{device}=="0a2b, MODE="0666"
On macOS, the OS will try to use a plugged-in Bluetooth Controller if one is available. It's best to to tell the OS to always use the internal Bluetooth Contoller.
For this, execute:
sudo nvram bluetoothHostControllerSwitchBehavior=never
and then reboot to activate the change.
Running the examples
BTstack's HCI USB transport will try to find a suitable Bluetooth module and use it.
On start, BTstack will try to find a suitable Bluetooth module. It will also print the path to the packet log as well as the USB path.
$ ./le_counter
Packet Log: /tmp/hci_dump.pklg
USB Path: 03-01-04-03
Firwmare ./ibt-12-16.sfi
Firmware upload complete
Firmware operational
Done 1
BTstack counter 0001
USB Path: 03-01-04-03
BTstack up and running on F8:34:41:D5:BE:6F.
If you want to run multiple examples at the same time, it helps to fix the path to the used Bluetooth module by passing -u usb-path to the executable.
Example running le_streamer and le_streamer_client in two processes, using Bluetooth dongles at USB path 6 and 4:
./le_streamer -u 6
Specified USB Path: 06
Packet Log: /tmp/hci_dump_6.pklg
USB Path: 06
BTstack up and running on 00:1A:7D:DA:71:13.
To start the streaming, please run the le_streamer_client example on other device, or use some GATT Explorer, e.g. LightBlue, BLExplr.
$ ./le_streamer_client -u 4
Specified USB Path: 04
Packet Log: /tmp/hci_dump_4.pklg
USB Path: 04
BTstack up and running on 00:1A:7D:DA:71:13.
Start scanning!