mirror of
https://github.com/bluekitchen/btstack.git
synced 2025-01-01 09:08:06 +00:00
50 lines
1.6 KiB
Markdown
50 lines
1.6 KiB
Markdown
These samples are meant to be used with the [PTS Dongel](https://bluekitchen-gmbh.com/bluetooth-pts-with-nordic-nrf52840-usb-dongle/) or an equivalent setup like
|
|
the one described in here using a nrf5340dk.
|
|
|
|
# nrf5340dk as HCI dongle
|
|
for this a working [Zephyr](https://www.zephyrproject.org/) build environment is required, where the setup of Zephyr is beyond the scope of this document.
|
|
|
|
The nrf5340 is a dual core SOC for which the network core handles the low level radio control and the application core handles the actual application.
|
|
So to make a working dongle the network core and the application core need to be programmed.
|
|
|
|
### network core / Packetcraft LL
|
|
for nrf5340 the latest netcore firmware is located at [sdk-nrf](https://github.com/nrfconnect/sdk-nrf/tree/main/lib/bin/bt_ll_acs_nrf53/bin)
|
|
to program it:
|
|
```sh
|
|
nrfjprog --program ble5-ctr-rpmsg_<version number>.hex --chiperase --coprocessor CP_NETWORK -r
|
|
```
|
|
|
|
### application core
|
|
the `hci_uart` sample is used here over USB CDC
|
|
build using:
|
|
```sh
|
|
west build -b nrf5340dk_nrf5340_cpuapp -- -DDTC_OVERLAY_FILE=usb.overlay -DOVERLAY_CONFIG=overlay-usb.conf
|
|
```
|
|
with `usb.overlay` specifying to use USB CDC instead of a physical UART
|
|
```c
|
|
/*
|
|
* Copyright (c) 2021 Nordic Semiconductor ASA
|
|
*
|
|
* SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
|
|
*/
|
|
|
|
/ {
|
|
chosen {
|
|
zephyr,bt-c2h-uart = &cdc_acm_uart0;
|
|
};
|
|
};
|
|
|
|
&zephyr_udc0 {
|
|
cdc_acm_uart0: cdc_acm_uart0 {
|
|
compatible = "zephyr,cdc-acm-uart";
|
|
};
|
|
};
|
|
```
|
|
and `overlay-usb.conf` to enable USB
|
|
```make
|
|
CONFIG_USB_DEVICE_STACK=y
|
|
CONFIG_USB_DEVICE_PRODUCT="Zephyr HCI UART sample"
|
|
CONFIG_USB_CDC_ACM=y
|
|
CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n
|
|
```
|