mirror of
https://github.com/bluekitchen/btstack.git
synced 2025-02-24 03:40:07 +00:00
24 lines
919 B
Markdown
24 lines
919 B
Markdown
# POSIX H4 Port for Atmel ATWILC3000
|
|
|
|
This port allows to use the ATWILC3000 connected via UART with BTstack running on a POSIX host system, see test setup below (which lacks a proper RESET button).
|
|
|
|
# Compilation
|
|
|
|
$ make
|
|
|
|
The Makefile downloads the wilc3000_bt_firmware.bin firmware from the [GitHub atwilc3000/firmware](https://github.com/atwilc3000/firmware) repo.
|
|
|
|
# Usage
|
|
|
|
Just run any of the provided examples, e.g.
|
|
|
|
$ ./le_counter
|
|
|
|
At start, the firmware file is first uploaded to the ATWILC3000, before BTstack start up.
|
|
|
|
Please note that it configures the ATWILC3000 for a higher baud rate it does not detect if the firmware has already been downloaded, so you need to reset the ATWILC3000 before starting an example.
|
|
|
|
Tested with the official [ATWILC3000 SHIELD](http://www.microchip.com/DevelopmentTools/ProductDetails.aspx?PartNO=ATWILC3000-SHLD) on OS X.
|
|
|
|
|