mirror of
https://github.com/aseprite/aseprite.git
synced 2024-12-30 12:19:04 +00:00
16 KiB
16 KiB
Aseprite File Format (.ase/.aseprite) Specifications
References
ASE files use Intel (little-endian) byte order.
BYTE: An 8-bit unsigned integer valueWORD: A 16-bit unsigned integer valueSHORT: A 16-bit signed integer valueDWORD: A 32-bit unsigned integer valueLONG: A 32-bit signed integer valueFIXED: A 32-bit fixed point (16.16) valueBYTE[n]: "n" bytes.STRING:WORD: string length (number of bytes)BYTE[length]: characters (in UTF-8) The'\0'character is not included.
PIXEL: One pixel, depending on the image pixel format:- RGBA:
BYTE[4], each pixel have 4 bytes in this order Red, Green, Blue, Alpha. - Grayscale:
BYTE[2], each pixel have 2 bytes in the order Value, Alpha. - Indexed:
BYTE, each pixel uses 1 byte (the index).
- RGBA:
TILE: Tilemaps: Each tile can be a 8-bit (BYTE), 16-bit (WORD), or 32-bit (DWORD) value and there are masks related to the meaning of each bit.
Introduction
The format is much like FLI/FLC files, but with different magic number and differents chunks. Also, the color depth can be 8, 16 or 32 for Indexed, Grayscale and RGB respectively, and images are compressed images with zlib. Color palettes are in FLI color chunks (it could be type=11 or type=4). For color depths more than 8bpp, palettes are optional.
To read the sprite:
- Read the ASE header
- For each frame do (how many frames? the ASE header has that information):
- Read the frame header
- For each chunk in this frame (how many chunks? the frame header has that information)
- Read the chunk (it should be layer information, a cel or a palette)
Header
A 128-byte header (same as FLC/FLI header, but with other magic number):
DWORD File size
WORD Magic number (0xA5E0)
WORD Frames
WORD Width in pixels
WORD Height in pixels
WORD Color depth (bits per pixel)
32 bpp = RGBA
16 bpp = Grayscale
8 bpp = Indexed
DWORD Flags:
1 = Layer opacity has valid value
WORD Speed (milliseconds between frame, like in FLC files)
DEPRECATED: You should use the frame duration field
from each frame header
DWORD Set be 0
DWORD Set be 0
BYTE Palette entry (index) which represent transparent color
in all non-background layers (only for Indexed sprites).
BYTE[3] Ignore these bytes
WORD Number of colors (0 means 256 for old sprites)
BYTE Pixel width (pixel ratio is "pixel width/pixel height").
If this or pixel height field is zero, pixel ratio is 1:1
BYTE Pixel height
SHORT X position of the grid
SHORT Y position of the grid
WORD Grid width (zero if there is no grid, grid size
is 16x16 on Aseprite by default)
WORD Grid height (zero if there is no grid)
BYTE[84] For future (set to zero)
Frames
After the header come the "frames" data. Each frame has this little header of 16 bytes:
DWORD Bytes in this frame
WORD Magic number (always 0xF1FA)
WORD Old field which specifies the number of "chunks"
in this frame. If this value is 0xFFFF, we might
have more chunks to read in this frame
(so we have to use the new field)
WORD Frame duration (in milliseconds)
BYTE[2] For future (set to zero)
DWORD New field which specifies the number of "chunks"
in this frame (if this is 0, use the old field)
Then each chunk format is:
DWORD Chunk size
WORD Chunk type
BYTE[] Chunk data
Chunk Types
Old palette chunk (0x0004)
Ignore this chunk if you find the new palette chunk (0x2019) Aseprite v1.1 saves both chunks 0x0004 and 0x2019 just for backward compatibility.
WORD Number of packets
+ For each packet
BYTE Number of palette entries to skip from the last packet (start from 0)
BYTE Number of colors in the packet (0 means 256)
+ For each color in the packet
BYTE Red (0-255)
BYTE Green (0-255)
BYTE Blue (0-255)
Old palette chunk (0x0011)
Ignore this chunk if you find the new palette chunk (0x2019)
WORD Number of packets
+ For each packet
BYTE Number of palette entries to skip from the last packet (start from 0)
BYTE Number of colors in the packet (0 means 256)
+ For each color in the packet
BYTE Red (0-63)
BYTE Green (0-63)
BYTE Blue (0-63)
Layer Chunk (0x2004)
In the first frame should be a set of layer chunks to determine the entire layers layout:
WORD Flags:
1 = Visible
2 = Editable
4 = Lock movement
8 = Background
16 = Prefer linked cels
32 = The layer group should be displayed collapsed
64 = The layer is a reference layer
WORD Layer type
0 = Normal (image) layer
1 = Group
2 = Tilemap
WORD Layer child level (see NOTE.1)
WORD Default layer width in pixels (ignored)
WORD Default layer height in pixels (ignored)
WORD Blend mode (always 0 for layer set)
Normal = 0
Multiply = 1
Screen = 2
Overlay = 3
Darken = 4
Lighten = 5
Color Dodge = 6
Color Burn = 7
Hard Light = 8
Soft Light = 9
Difference = 10
Exclusion = 11
Hue = 12
Saturation = 13
Color = 14
Luminosity = 15
Addition = 16
Subtract = 17
Divide = 18
BYTE Opacity
Note: valid only if file header flags field has bit 1 set
BYTE[3] For future (set to zero)
STRING Layer name
+ If layer type = 2
DWORD Tileset index
Cel Chunk (0x2005)
This chunk determine where to put a cel in the specified layer/frame.
WORD Layer index (see NOTE.2)
SHORT X position
SHORT Y position
BYTE Opacity level
WORD Cel Type
0 - Raw Image Data (unused, compressed image is preferred)
1 - Linked Cel
2 - Compressed Image
3 - Compressed Tilemap
BYTE[7] For future (set to zero)
+ For cel type = 0 (Raw Image Data)
WORD Width in pixels
WORD Height in pixels
PIXEL[] Raw pixel data: row by row from top to bottom,
for each scanline read pixels from left to right.
+ For cel type = 1 (Linked Cel)
WORD Frame position to link with
+ For cel type = 2 (Compressed Image)
WORD Width in pixels
WORD Height in pixels
BYTE[] "Raw Cel" data compressed with ZLIB method (see NOTE.3)
+ For cel type = 3 (Compressed Tilemap)
WORD Width in number of tiles
WORD Height in number of tiles
WORD Bits per tile (at the moment it's always 32-bit per tile)
DWORD Bitmask for tile ID (e.g. 0x1fffffff for 32-bit tiles)
DWORD Bitmask for X flip
DWORD Bitmask for Y flip
DWORD Bitmask for 90CW rotation
BYTE[10] Reserved
TILE[] Row by row, from top to bottom tile by tile
compressed with ZLIB method (see NOTE.3)
Cel Extra Chunk (0x2006)
Adds extra information to the latest read cel.
DWORD Flags (set to zero)
1 = Precise bounds are set
FIXED Precise X position
FIXED Precise Y position
FIXED Width of the cel in the sprite (scaled in real-time)
FIXED Height of the cel in the sprite
BYTE[16] For future use (set to zero)
Color Profile Chunk (0x2007)
Color profile for RGB or grayscale values.
WORD Type
0 - no color profile (as in old .aseprite files)
1 - use sRGB
2 - use the embedded ICC profile
WORD Flags
1 - use special fixed gamma
FIXED Fixed gamma (1.0 = linear)
Note: The gamma in sRGB is 2.2 in overall but it doesn't use
this fixed gamma, because sRGB uses different gamma sections
(linear and non-linear). If sRGB is specified with a fixed
gamma = 1.0, it means that this is Linear sRGB.
BYTE[8] Reserved (set to zero)
+ If type = ICC:
DWORD ICC profile data length
BYTE[] ICC profile data. More info: http://www.color.org/ICC1V42.pdf
External Files Chunk (0x2008)
A list of external files linked with this file. It might be used to reference external palettes or tilesets.
DWORD Number of entries
BYTE[8] Reserved (set to zero)
+ For each entry
DWORD Entry ID (this ID is referenced by tilesets or palettes)
BYTE[8] Reserved (set to zero)
STRING External file name
Mask Chunk (0x2016) DEPRECATED
SHORT X position
SHORT Y position
WORD Width
WORD Height
BYTE[8] For future (set to zero)
STRING Mask name
BYTE[] Bit map data (size = height*((width+7)/8))
Each byte contains 8 pixels (the leftmost pixels are
packed into the high order bits)
Path Chunk (0x2017)
Never used.
Tags Chunk (0x2018)
After the tags chunk, you can write one user data chunk for each tag. E.g. if there are 10 tags, you can then write 10 user data chunks one for each tag.
WORD Number of tags
BYTE[8] For future (set to zero)
+ For each tag
WORD From frame
WORD To frame
BYTE Loop animation direction
0 = Forward
1 = Reverse
2 = Ping-pong
3 = Ping-pong Reverse
WORD Repeat N times. Play this animation section N times:
0 = Doesn't specify (plays infinite in UI, once on export,
for ping-pong it plays once in each direction)
1 = Plays once (for ping-pong, it plays just in one direction)
2 = Plays twice (for ping-pong, it plays once in one direction,
and once in reverse)
n = Plays N times
BYTE[6] For future (set to zero)
BYTE[3] RGB values of the tag color
Deprecated, used only for backward compatibility with Aseprite v1.2.x
The color of the tag is the one in the user data field following
the tags chunk
BYTE Extra byte (zero)
STRING Tag name
Palette Chunk (0x2019)
DWORD New palette size (total number of entries)
DWORD First color index to change
DWORD Last color index to change
BYTE[8] For future (set to zero)
+ For each palette entry in [from,to] range (to-from+1 entries)
WORD Entry flags:
1 = Has name
BYTE Red (0-255)
BYTE Green (0-255)
BYTE Blue (0-255)
BYTE Alpha (0-255)
+ If has name bit in entry flags
STRING Color name
User Data Chunk (0x2020)
Insert this user data in the last read chunk. E.g. If we've read a layer, this user data belongs to that layer, if we've read a cel, it belongs to that cel, etc. There are some special cases: After a Tags chunk, there will be several user data fields, one for each tag, you should associate the user data in the same order as the tags are in the Tags chunk. In version 1.3 a sprite has associated user data, to consider this case there is an User Data Chunk at the first frame after the Palette Chunk.
DWORD Flags
1 = Has text
2 = Has color
+ If flags have bit 1
STRING Text
+ If flags have bit 2
BYTE Color Red (0-255)
BYTE Color Green (0-255)
BYTE Color Blue (0-255)
BYTE Color Alpha (0-255)
Slice Chunk (0x2022)
DWORD Number of "slice keys"
DWORD Flags
1 = It's a 9-patches slice
2 = Has pivot information
DWORD Reserved
STRING Name
+ For each slice key
DWORD Frame number (this slice is valid from
this frame to the end of the animation)
LONG Slice X origin coordinate in the sprite
LONG Slice Y origin coordinate in the sprite
DWORD Slice width (can be 0 if this slice hidden in the
animation from the given frame)
DWORD Slice height
+ If flags have bit 1
LONG Center X position (relative to slice bounds)
LONG Center Y position
DWORD Center width
DWORD Center height
+ If flags have bit 2
LONG Pivot X position (relative to the slice origin)
LONG Pivot Y position (relative to the slice origin)
Tileset Chunk (0x2023)
DWORD Tileset ID
DWORD Tileset flags
1 - Include link to external file
2 - Include tiles inside this file
4 - Tilemaps using this tileset use tile ID=0 as empty tile
(this is the new format). In rare cases this bit is off,
and the empty tile will be equal to 0xffffffff (used in
internal versions of Aseprite)
DWORD Number of tiles
WORD Tile Width
WORD Tile Height
SHORT Base Index: Number to show in the screen from the tile with
index 1 and so on (by default this is field is 1, so the data
that is displayed is equivalent to the data in memory). But it
can be 0 to display zero-based indexing (this field isn't used
for the representation of the data in the file, it's just for
UI purposes).
BYTE[14] Reserved
STRING Name of the tileset
+ If flag 1 is set
DWORD ID of the external file. This ID is one entry
of the the External Files Chunk.
DWORD Tileset ID in the external file
+ If flag 2 is set
DWORD Compressed data length
PIXEL[] Compressed Tileset image (see NOTE.3):
(Tile Width) x (Tile Height x Number of Tiles)
Notes
NOTE.1
The child level is used to show the relationship of this layer with the last one read, for example:
Layer name and hierarchy Child Level
-----------------------------------------------
- Background 0
`- Layer1 1
- Foreground 0
|- My set1 1
| `- Layer2 2
`- Layer3 1
NOTE.2
The layer index is a number to identify any layer in the sprite, for example:
Layer name and hierarchy Layer index
-----------------------------------------------
- Background 0
`- Layer1 1
- Foreground 2
|- My set1 3
| `- Layer2 4
`- Layer3 5
NOTE.3
Details about the ZLIB and DEFLATE compression methods:
- https://www.ietf.org/rfc/rfc1950
- https://www.ietf.org/rfc/rfc1951
- Some extra notes that might help you to decode the data: http://george.chiramattel.com/blog/2007/09/deflatestream-block-length-does-not-match.html
File Format Changes
-
The first change from the first release of the new .ase format, is the new frame duration field. This is because now each frame can have different duration.
How to read both formats (old and new one)? You should set all frames durations to the "speed" field read from the main ASE header. Then, if you found a frame with the frame-duration field > 0, you should update the duration of the frame with that value.