* Fix Sixaxis gamepad operation
== DETAILS
It looks like commit 78e7d23c144c862d65ae1bf7ee41a1228bdfa380 broke
the DualShock. Sorry, @revvv, but this is probably going to break the
Retrode driver. We'll need to figure out a different solution.
* Fix a bunch of HID implementations
== DETAILS
As mentioned in the previous commit, the thing that broke the DS3
driver was a change to the wiiu HID handler, which did some pointer
math on the data buffer.
The thing is.. there's no reason to do that pointer math. Yet, I found
the same thing on almost every other HID driver: OSX, libusb, wiiusb.
The only other HID driver that did not do this was the Bluetooth
HID driver.
It doesn't make any sense. The only reason it doesn't crash is because
the memory right before the buffer is valid memory.
Change summary:
- remove the weird pointer math from all HID controllers
- remove the `#ifdef apple ...` in the ds3 and gamecube adapter
drivers, because it's no longer needed.
- in the pad packet handlers, decrement data buffer offset references
to account for the removal of the buffer manipulation.
* Fix DualShock 4
== DETAILS
Should've only subtracted 1, not 2; and now the pad works.
Also, added a PID to cover newer model DS4s. I picked "R2" out of the air
for the constant.
Tested on Mac OS
* Really really fix iohidmanager_set_report
A huge apology to @23rd for insulting your fix. I was wrong to call you
wrong.
That left the question: why did that change break the DS3?
Well, it's because `IOHIDDeviceSetReport` expects the report buffer to be
just the report. All of RA's HID SetReport calls include the report number
in the first byte, so we have to trim that off.
We actually do this in a different invocation of `IOHIDDeviceSetReport`
elsewhere in the file! This commit applies that same logic to
`iohidmanager_set_report`
This has two benefits:
1. The DS3 works
2. The DS3 no longer requres the user to press the PS button to activate
it the first time. You plug it in and it Just Works, just like on Wii U.
== DETAILS
Put the finishing touches on getting the DS3 to work on Mac OSX.
Basically, there's some differences in the HID interface bewtween
wiiu and osx where OSX expects the first byte of the report to be
the report ID, while wiiu expects that byte to be trimmed off.
I was able to put this behavior in the respective HID
implementations, which eliminated the confusing packet offset
ifdefs.
And, I was able to get the LEDs working again.
== DETAILS
The DS3 driver previously only worked with the Wii U HID implementation.
I adapted this driver from the Linux driver for the DS3. It's not quite
100%--I haven't got the LEDs to work properly--but it's functional.
Going to continue tweaking it to see if I can get the LEDs to work.
== DETAILS
The GCA uses a weird HID class that our current filters don't
catch, so we add it.
Needed to do a small amount of tweaking on the GCA driver to
account for iohidmanager weirdness.
For the mayflash N64 adapter, I was getting a BAD EXC ADDRESS (in mac OS 10.13) for this line (tmp was NULL). Retroarch would crash in the gui if I pressed a button from the DPAD on controller 2. With this change, it no longer crashes in the gui and still registers the button push.
For my Xbox One Controller the min input for the hat is 1 and not 0. 0
points to the default state that is called after each button press.
On top of that the two axis for the trigger buttons were ignored. I
added some additional axis that are not present on my controller but
will probably help for other input devices.
== DETAILS
- the free() method of the hid_driver_t interface needs its
parameter defined as const in order for the compiler to stop
complaining about losing const-ness.
- if a joypad list is created with <MAX_USERS slots in it, the
destroy() function will crash because it assumes there are MAX_USERS
entries.
To do this, the allocate function creates n+1 slots, and gives the
last slot a canary value that the destroy() method can then watch for
when iterating through the list.
== DETAIL
One minor detail missed in the last commit: actually putting the
send_control function into the driver declaration. Woops.
Not doing the Wii U because it will be using the other methods.
