Go to file
2020-02-29 12:48:00 -05:00
pogoContact Add files via upload 2020-02-26 19:56:43 -05:00
boardScreencap.PNG Add files via upload 2020-02-26 20:55:29 -05:00
comparisonPic.jpg Add files via upload 2020-02-26 20:07:51 -05:00
LICENSE Create LICENSE 2020-02-29 12:47:44 -05:00
README.md Update README.md 2020-02-26 20:55:57 -05:00
washerStandoff.stl Add files via upload 2020-02-26 19:56:43 -05:00

PinephonePogoBreakout

A breakout board for the Pinephone's expansion port, which consists of 6 pogo pins connected to I2C (SDA and SCL), the battery (at 3.8V), a 3.3V power rail (or is it 5V? Not confirmed yet), an interrupt pin, and GND.

I will go back and update the silkscreen layer to indicate which I2C pin is which, once I find out myself.

Also the standoff/washer .stl file is for 3d printing; it's used because I left the three holes in the pcb larger than necessary to allow some wiggle room, and the machine screw (which is M1.4 by the way) will slip through it otherwise.

alt text

alt text