tinyusb/hw/mcu/dialog/da1469x/src/system_da1469x.c
Jerzy Kasenberg 8e143fc962 Add board support for Dialog DA1469x-dk-pro
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
2020-06-29 11:02:32 +02:00

62 lines
1.9 KiB
C

/*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
#include "mcu/mcu.h"
#include <mcu/da1469x_clock.h>
extern uint8_t __StackLimit;
uint32_t SystemCoreClock = 32000000;
void
SystemInit(void)
{
/* Enable FPU when using hard-float */
#if (__FPU_USED == 1)
SCB->CPACR |= (3UL << 20) | (3UL << 22);
__DSB();
__ISB();
#endif
/* Freez watchdog */
GPREG->SET_FREEZE_REG |= GPREG_SET_FREEZE_REG_FRZ_SYS_WDOG_Msk;
/* Initialize power domains (disable radio only) */
CRG_TOP->PMU_CTRL_REG = CRG_TOP_PMU_CTRL_REG_RADIO_SLEEP_Msk;
CRG_TOP->P0_SET_PAD_LATCH_REG = CRG_TOP_P0_PAD_LATCH_REG_P0_LATCH_EN_Msk;
CRG_TOP->P1_SET_PAD_LATCH_REG = CRG_TOP_P1_PAD_LATCH_REG_P1_LATCH_EN_Msk;
/* Reset clock dividers to 0 */
CRG_TOP->CLK_AMBA_REG &= ~(CRG_TOP_CLK_AMBA_REG_HCLK_DIV_Msk | CRG_TOP_CLK_AMBA_REG_PCLK_DIV_Msk);
/* PD_TIM is already started in SystemInit */
da1469x_clock_sys_xtal32m_init();
da1469x_clock_sys_xtal32m_enable();
da1469x_clock_sys_pll_enable();
da1469x_clock_pll_wait_to_lock();
/* Switch to XTAL32M and disable RC32M */
da1469x_clock_sys_xtal32m_switch_safe();
da1469x_clock_sys_rc32m_disable();
}
void _init(void)
{
}