mirror of
https://github.com/hathach/tinyusb.git
synced 2025-02-21 03:40:52 +00:00
8e143fc962
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board. Source files .c .S and .ld are taken from Apache Mynewt repository. Those files were stripped to allow starting board without Mynewt os.
65 lines
1.9 KiB
Makefile
65 lines
1.9 KiB
Makefile
CFLAGS += \
|
|
-flto \
|
|
-mthumb \
|
|
-mthumb-interwork \
|
|
-mabi=aapcs \
|
|
-mcpu=cortex-m33+nodsp \
|
|
-mfloat-abi=hard \
|
|
-mfpu=fpv5-sp-d16 \
|
|
-nostdlib \
|
|
-DCORE_M33 \
|
|
-DCFG_TUSB_MCU=OPT_MCU_DA1469X \
|
|
-DCFG_TUD_ENDPOINT0_SIZE=8\
|
|
|
|
# mcu driver cause following warnings
|
|
# CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter
|
|
|
|
MCU_FAMILY_DIR = hw/mcu/dialog/da1469x
|
|
MCU_DIR = hw/mcu/dialog/da14699
|
|
|
|
# All source paths should be relative to the top level.
|
|
LD_FILE = hw/bsp/$(BOARD)/da1469x.ld
|
|
|
|
SRC_C += \
|
|
$(MCU_FAMILY_DIR)/src/system_da1469x.c \
|
|
$(MCU_FAMILY_DIR)/src/da1469x_clock.c \
|
|
$(MCU_FAMILY_DIR)/src/hal_gpio.c \
|
|
|
|
SRC_S += $(TOP)/hw/bsp/$(BOARD)/gcc_startup_da1469x.S
|
|
|
|
INC += \
|
|
$(TOP)/hw/bsp/$(BOARD) \
|
|
$(TOP)/$(MCU_DIR)/include \
|
|
$(TOP)/$(MCU_FAMILY_DIR)/include \
|
|
$(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include \
|
|
|
|
# For TinyUSB port source
|
|
VENDOR = dialog
|
|
# While this is for da1469x chip, there is chance that da1468x chip family will also work
|
|
CHIP_FAMILY = da146xx
|
|
|
|
# For freeRTOS port source
|
|
FREERTOS_PORT = ARM_CM33_NTZ/non_secure
|
|
|
|
# For flash-jlink target
|
|
JLINK_DEVICE = DA14699
|
|
JLINK_IF = swd
|
|
|
|
# flash using jlink but with some twists
|
|
flash: flash-dialog
|
|
|
|
flash-dialog: $(BUILD)/$(BOARD)-firmware.bin
|
|
@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
|
|
@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >>$(BUILD)/version.h
|
|
mkimage da1469x $(BUILD)/$(BOARD)-firmware.bin $(BUILD)/version.h $^.img
|
|
cp $(TOP)/hw/bsp/$(BOARD)/product_header.dump $(BUILD)/$(BOARD)-image.bin
|
|
cat $^.img >> $(BUILD)/$(BOARD)-image.bin
|
|
@echo r > $(BUILD)/$(BOARD).jlink
|
|
@echo halt >> $(BUILD)/$(BOARD).jlink
|
|
@echo loadfile $(BUILD)/$(BOARD)-image.bin 0x16000000 >> $(BUILD)/$(BOARD).jlink
|
|
@echo r >> $(BUILD)/$(BOARD).jlink
|
|
@echo go >> $(BUILD)/$(BOARD).jlink
|
|
@echo exit >> $(BUILD)/$(BOARD).jlink
|
|
$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
|
|
|