Merge pull request #1506 from hathach/more-dynamic-rhport

more dynamic controller for host

src/device/usbd.c

@@ -384,7 +384,7 @@ bool tud_init (uint8_t rhport)
   // skip if already initialized
   if ( tud_inited() ) return true;
 
-  TU_LOG2("USBD init rhport %u\r\n", rhport);
+  TU_LOG2("USBD init on controller %u\r\n", rhport);
   TU_LOG2_INT(sizeof(usbd_device_t));
 
   tu_varclr(&_usbd_dev);

src/host/usbh.c

@@ -125,6 +125,7 @@ typedef struct {
 // Invalid driver ID in itf2drv[] ep2drv[][] mapping
 enum { DRVID_INVALID = 0xFFu };
 enum { ADDR_INVALID  = 0xFFu };
+enum { CONTROLLER_INVALID = 0xFFu };
 
 #if CFG_TUSB_DEBUG >= 2
   #define DRIVER_NAME(_name)    .name = _name,
@@ -203,7 +204,7 @@ enum { CONFIG_NUM = 1 }; // default to use configuration 1
 // sum of end device + hub
 #define TOTAL_DEVICES   (CFG_TUH_DEVICE_MAX + CFG_TUH_HUB)
 
-static bool _usbh_initialized = false;
+static uint8_t _usbh_controller = CONTROLLER_INVALID;
 
 // Device with address = 0 for enumeration
 static usbh_dev0_t _dev0;
@@ -280,8 +281,8 @@ void osal_task_delay(uint32_t msec)
 {
   (void) msec;
 
-  const uint32_t start = hcd_frame_number(TUH_OPT_RHPORT);
+  const uint32_t start = hcd_frame_number(_usbh_controller);
-  while ( ( hcd_frame_number(TUH_OPT_RHPORT) - start ) < msec ) {}
+  while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {}
 }
 #endif
 
@@ -335,15 +336,15 @@ static void clear_device(usbh_device_t* dev)
 
 bool tuh_inited(void)
 {
-  return _usbh_initialized;
+  return _usbh_controller != CONTROLLER_INVALID;
 }
 
-bool tuh_init(uint8_t rhport)
+bool tuh_init(uint8_t controller_id)
 {
   // skip if already initialized
-  if (_usbh_initialized) return _usbh_initialized;
+  if ( tuh_inited() ) return true;
 
-  TU_LOG2("USBH init rhport %u\r\n", rhport);
+  TU_LOG2("USBH init on controller %u\r\n", controller_id);
   TU_LOG2_INT(sizeof(usbh_device_t));
   TU_LOG2_INT(sizeof(hcd_event_t));
   TU_LOG2_INT(sizeof(_ctrl_xfer));
@@ -376,10 +377,11 @@ bool tuh_init(uint8_t rhport)
     usbh_class_drivers[drv_id].init();
   }
 
-  TU_ASSERT(hcd_init(rhport));
+  _usbh_controller = controller_id;;
-  hcd_int_enable(rhport);
+
+  TU_ASSERT(hcd_init(controller_id));
+  hcd_int_enable(controller_id);
 
-  _usbh_initialized = true;
   return true;
 }
 
@@ -721,13 +723,13 @@ uint8_t* usbh_get_enum_buf(void)
 
 void usbh_int_set(bool enabled)
 {
-  // TODO all host controller
+  // TODO all host controller if multiple is used
   if (enabled)
   {
-    hcd_int_enable(TUH_OPT_RHPORT);
+    hcd_int_enable(_usbh_controller);
   }else
   {
-    hcd_int_disable(TUH_OPT_RHPORT);
+    hcd_int_disable(_usbh_controller);
   }
 }
 
@@ -1238,14 +1240,15 @@ static void process_enumeration(tuh_xfer_t* xfer)
 
 #if 0
     case ENUM_RESET_2:
-      // XXX note used by now, but may be needed for some devices !?
+      // TODO not used by now, but may be needed for some devices !?
       // Reset device again before Set Address
       TU_LOG2("Port reset2 \r\n");
       if (_dev0.hub_addr == 0)
       {
         // connected directly to roothub
         hcd_port_reset( _dev0.rhport );
-        osal_task_delay(RESET_DELAY);
+        osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since
+                                      // sof of controller may not running while reseting
         hcd_port_reset_end(_dev0.rhport);
         // TODO: fall through to SET ADDRESS, refactor later
       }
@@ -1364,7 +1367,8 @@ static bool enum_new_device(hcd_event_t* event)
     // connected/disconnected directly with roothub
     // wait until device is stable TODO non blocking
     hcd_port_reset(_dev0.rhport);
-    osal_task_delay(RESET_DELAY);
+    osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since
+                                  // sof of controller may not running while reseting
     hcd_port_reset_end( _dev0.rhport);
 
     // device unplugged while delaying

src/host/usbh.h

@@ -95,10 +95,10 @@ TU_ATTR_WEAK void tuh_umount_cb(uint8_t daddr);
 // Should be called before tuh_init()
 // - cfg_id   : configure ID (TBD)
 // - cfg_param: configure data, structure depends on the ID
-bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param);
+bool tuh_configure(uint8_t controller_id, uint32_t cfg_id, const void* cfg_param);
 
 // Init host stack
-bool tuh_init(uint8_t rhport);
+bool tuh_init(uint8_t controller_id);
 
 // Check if host stack is already initialized
 bool tuh_inited(void);

src/tusb_option.h

@@ -28,7 +28,7 @@
 #define _TUSB_OPTION_H_
 
 // To avoid GCC compiler warnings when -pedantic option is used (strict ISO C)
-typedef int make_iso_compilers_happy ;
+typedef int make_iso_compilers_happy;
 
 #include "common/tusb_compiler.h"
 
@@ -217,6 +217,9 @@ typedef int make_iso_compilers_happy ;
   #define CFG_TUD_MAX_SPEED   (TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK)
 #endif
 
+// For backward compatible
+#define TUSB_OPT_DEVICE_ENABLED CFG_TUD_ENABLED
+
 // highspeed support indicator
 #define TUD_OPT_HIGH_SPEED    (CFG_TUD_MAX_SPEED ? CFG_TUD_MAX_SPEED : TUP_RHPORT_HIGHSPEED)
 
@@ -230,7 +233,6 @@ typedef int make_iso_compilers_happy ;
   #define TUH_OPT_RHPORT   1
 #else
   #define TUH_RHPORT_MODE   OPT_MODE_NONE
-  #define TUH_OPT_RHPORT   -1
 #endif
 
 #ifndef CFG_TUH_ENABLED
@@ -244,7 +246,6 @@ typedef int make_iso_compilers_happy ;
 #endif
 
 // For backward compatible
-#define TUSB_OPT_DEVICE_ENABLED CFG_TUD_ENABLED
 #define TUSB_OPT_HOST_ENABLED   CFG_TUH_ENABLED
 
 //--------------------------------------------------------------------+