diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index c6c02d181..b359ebb44 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,148 @@ Changelog ********* +0.16.0 +====== + +- New controller driver: MAX3421e (usb host shield), rusb2 (Renesas USB2.0), ChipIdea fullspeed +- New MCUs: MCXn9, nRF5340, STM32: G0, G4, L5, U575, U5A5, RA6m5, CH32F20x +- Add initial TypeC PowerDelivery support with STM32G4 +- Remove submodules and use python script to manage repo dependencies #1947 +- Add CMake support for most families and boards, move build file from tools/ to examples/build_system +- Add ETM trace support with JTrace for nrf52840, nrf5340, mcb1857, stm32h743eval, ra6m5 +- [osal] Make it possible to override the osal_task_delay() in osal_none +- Add CDC+UAC2 composite device example +- Enhance Hardware-in-the-loop (HIL) testing with more boards: rp2040, stm32l412nucleo, stm32f746disco, lpcxpresso43s67 + +Controller Driver (DCD & HCD) +----------------------------- + +- Add new ISO endpoint API: dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() +- Remove legacy driver st/synopsys + +- EHCI + + - [iMXRT] Add dache clean/invalidate when memory is in cacheable memory + - Fix portsc write issue which cause problem with enumeration + - Fix an issue when doing port reset write to portsc + - Fix port change detect is not recognized when power on with attached device + - Fix xfer failed with disconnected device as stalled + - Fix error on EHCI causes xfer error in non-queued qhd which cause memory fault + - Un-roll recursive hub removal with usbh queue + - Fix issue when removing queue head + - Implement hcd_edpt_abort_xfer() + - use standard USB complete interrupt instead of custom chipidea async/period interrupt to be more compatible with other ehci implementation + - refactor usb complete & error isr processing, merge, update. Fix EHCI QHD reuses QTD on wrong endpoint + - Improve bus reset, fix send_setup() not carried out if halted previously + - Fix clear qhd halted bit if not caused by STALL protocol to allow for next transfer + +- ChipIdea Highspeed + + - Fix control transfer issue when previous status and new setup complete in the same isr frame + - [imxrt] Add dcache support for cache region + +- ChipIdea Fullspeed + + - Generalize ChipIdea Fullspeed driver for mcxn9 (port 0), kinetis + +- nrf + + - Fix DMA race condition with ISO OUT transfer #1946 + - Add support for nRF5340 with pca10095 board + +- Renesas rusb2 + + - Generalize rusb2 driver for ra, rx mcus + - rework both dcd and hcd for better multiple ports support + - Add support for board with HS USB port: ra6m5 port1 + +- rp2040 + + - [dcd] Make writes to SIE_CTRL aware of concurrent access + - [hcd] add hcd_frame_number(), hcd_edpt_abort_xfer() for pio-usb host + +- stm32 fsdev: + + - Add STM32L5 support + - Implement dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() + +- OHCI + + - Allows configurable root hub ports, handles SMM mode (Ref OHCI spec 5.1.1.3.3) and Bios mode (Ref OHCI spec 5.1.1.3.4) + - Fix FrameIntervalToggle must be toggled after we write the FrameInterval (Ref OHCI Spec 7.3.1) + - Wait PowerOnToPowerGoodTime after we enable power of the RH ports (Ref OHCI Spec 7.4.1) + - Generate port interrupts for devices already connected during init. + - Fix issue when removing queue head + - Disable MIE during IRQ processing and clear HccaDoneHead on completion as per OCHI Spec Page 80 + +Device Stack +------------ + +- Add optional hooks tud_event_hook_cb() +- Audio (UAC2) + + - Fix feedback EP buffer alignment. + - Fix encoding, update example + - Improve IN transfer + +- Bluetooth + + - Add historical EP compatibility for Bluetooth HCI + +- CDC + + - Fix line_coding alignment + - Fix typo in cdc line coding enum + +- MIDI + + - Fix stream_write() always writes system messages to cable 0 + - Fix incorrect NOTE_ON, NOTE_OFF definitions + +- USBTMC: Fix tmc488 bit order + +- Vendor: fix read()/write() race condition + +- Video (UVC) + + - Add the capability for video class to handle a bulk endpoint in the streaming interface. + +Host Stack +---------- + +- USBH + + - Add new APIs: tuh_interface_set(), tuh_task_event_ready(), tuh_edpt_abort_xfer(), tuh_rhport_reset_bus(), tuh_rhport_is_active() + - Fix issue when device generate multiple attach/detach/attach when plugging in + - Prefer application callback over built-in driver on transfer complete event + - Correct hcd_edpt_clear_stall() API signature + - Separate bus reset delay and contact debouncing delay in enumeration + - Support usbh_app_driver_get_cb() for application drivers + - Fix usbh enumeration removal race condition + - Add optional hooks tuh_event_hook_cb() + +- CDC + + - Breaking: change tuh_cdc_itf_get_info() to use tuh_itf_info_t instead of tuh_cdc_info_t + - Fix cdc host enumeration issue when device does not support line request + - Add support for vendor usb2uart serial: ftdi, cp210x, ch9102f + - Improve sync control API e.g tuh_cdc_set_control_line_state(), tuh_cdc_set_line_coding() + +- HID + + - Add new APIs tuh_hid_send_report(), tuh_hid_itf_get_info(), tuh_hid_receive_ready(), tuh_hid_send_ready(), tuh_hid_set_default_protocol() + - Change meaning of CFG_TUH_HID to total number of HID interfaces supported. Previously CFG_TUH_HID is max number of interfaces per device which is rather limited and consume more resources than needed. + +- HUB + + - Fix handling of empty "status change" interrupt + - Fix issue with hub status_change is not aligned + +- MSC + + - Fix bug in tuh_msc_ready() + - Fix host msc get maxlun not using aligned section memory + 0.15.0 ======