diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h
index 484f651b1..2e9731eaf 100644
--- a/examples/host/device_info/src/tusb_config.h
+++ b/examples/host/device_info/src/tusb_config.h
@@ -70,7 +70,7 @@
 #define CFG_TUH_ENABLED       1
 
 #if CFG_TUSB_MCU == OPT_MCU_RP2040
-   #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
+  // #define CFG_TUH_RPI_PIO_USB   1 // use pio-usb as host controller
   // #define CFG_TUH_MAX3421       1 // use max3421 as host controller
 
   // host roothub port is 1 if using either pio-usb or max3421
diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c
index abce35245..1cc5c1836 100644
--- a/src/portable/nordic/nrf5x/dcd_nrf5x.c
+++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c
@@ -907,9 +907,9 @@ void tusb_hal_nrf_power_event(uint32_t event) {
     USB_EVT_READY = 2
   };
 
-#if CFG_TUSB_DEBUG >= 2
+#if CFG_TUSB_DEBUG >= 3
   const char* const power_evt_str[] = {"Detected", "Removed", "Ready"};
-  TU_LOG(2, "Power USB event: %s\r\n", power_evt_str[event]);
+  TU_LOG(3, "Power USB event: %s\r\n", power_evt_str[event]);
 #endif
 
   switch (event) {
diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c
index dc71117b3..ef61146aa 100644
--- a/src/portable/nxp/khci/dcd_khci.c
+++ b/src/portable/nxp/khci/dcd_khci.c
@@ -540,7 +540,7 @@ void dcd_int_handler(uint8_t rhport)
   }
 
   if (is & USB_ISTAT_SLEEP_MASK) {
-    // TU_LOG2("Suspend: "); TU_LOG2_HEX(is);
+    // TU_LOG3("Suspend: "); TU_LOG2_HEX(is);
 
     // Note Host usually has extra delay after bus reset (without SOF), which could falsely
     // detected as Sleep event. Though usbd has debouncing logic so we are good