diff --git a/.idea/vcs.xml b/.idea/vcs.xml index 63371256f..94a25f7f4 100644 --- a/.idea/vcs.xml +++ b/.idea/vcs.xml @@ -1,67 +1,6 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - \ No newline at end of file diff --git a/examples/make.mk b/examples/make.mk index 2ce6fb398..28ebc62da 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -2,6 +2,8 @@ # Common make definition for all examples # --------------------------------------- +TOOLCHAIN ?= gcc + #-------------- TOP and CURRENT_PATH ------------ # Set TOP to be the path to get from the current directory (where make was @@ -75,6 +77,7 @@ else endif #-------------- Cross Compiler ------------ + # Can be set by board, default to ARM GCC CROSS_COMPILE ?= arm-none-eabi- diff --git a/examples/rules.mk b/examples/rules.mk index 426000128..f6422092a 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -227,14 +227,19 @@ endif # Jlink Interface JLINK_IF ?= swd +# Jlink script +define jlink_script +halt +loadfile $^ +r +go +exit +endef +export jlink_script + # Flash using jlink flash-jlink: $(BUILD)/$(PROJECT).hex - @echo halt > $(BUILD)/$(BOARD).jlink - @echo r >> $(BUILD)/$(BOARD).jlink - @echo loadfile $^ >> $(BUILD)/$(BOARD).jlink - @echo r >> $(BUILD)/$(BOARD).jlink - @echo go >> $(BUILD)/$(BOARD).jlink - @echo exit >> $(BUILD)/$(BOARD).jlink + @echo "$$jlink_script" > $(BUILD)/$(BOARD).jlink $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink # Flash STM32 MCU using stlink with STM32 Cube Programmer CLI diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 01e7bb018..442aba955 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -1,149 +1,205 @@ -if (NOT TARGET _family_support_marker) - add_library(_family_support_marker INTERFACE) +if (TARGET _family_support_marker) + return() +endif () - include(CMakePrintHelpers) +add_library(_family_support_marker INTERFACE) - # Default to gcc - if(NOT DEFINED TOOLCHAIN) - set(TOOLCHAIN gcc) - endif() +include(CMakePrintHelpers) - if (NOT FAMILY) - message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line") - endif() - - if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) - message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") - endif() - - function(family_filter RESULT DIR) - get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) - - if (EXISTS "${DIR}/only.txt") - file(READ "${DIR}/only.txt" ONLYS) - # Replace newlines with semicolon so that it is treated as a list by CMake - string(REPLACE "\n" ";" ONLYS_LINES ${ONLYS}) - # For each mcu - foreach(MCU IN LISTS FAMILY_MCUS) - # For each line in only.txt - foreach(_line ${ONLYS_LINES}) - # If mcu:xxx exists for this mcu or board:xxx then include - if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}") - set(${RESULT} 1 PARENT_SCOPE) - return() - endif() - endforeach() - endforeach() - - # Didn't find it in only file so don't build - set(${RESULT} 0 PARENT_SCOPE) - - elseif (EXISTS "${DIR}/skip.txt") - file(READ "${DIR}/skip.txt" SKIPS) - # Replace newlines with semicolon so that it is treated as a list by CMake - string(REPLACE "\n" ";" SKIPS_LINES ${SKIPS}) - # For each mcu - foreach(MCU IN LISTS FAMILY_MCUS) - # For each line in only.txt - foreach(_line ${SKIPS_LINES}) - # If mcu:xxx exists for this mcu then skip - if (${_line} STREQUAL "mcu:${MCU}") - set(${RESULT} 0 PARENT_SCOPE) - return() - endif() - endforeach() - endforeach() - - # Didn't find in skip file so build - set(${RESULT} 1 PARENT_SCOPE) - - else() - - # Didn't find skip or only file so build - set(${RESULT} 1 PARENT_SCOPE) - - endif() - - endfunction() - - function(family_add_subdirectory DIR) - family_filter(SHOULD_ADD "${DIR}") - if (SHOULD_ADD) - add_subdirectory(${DIR}) - endif() - endfunction() - - function(family_get_project_name OUTPUT_NAME DIR) - get_filename_component(SHORT_NAME ${DIR} NAME) - set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) - endfunction() - - function(family_initialize_project PROJECT DIR) - family_filter(ALLOWED "${DIR}") - if (NOT ALLOWED) - get_filename_component(SHORT_NAME ${DIR} NAME) - message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") - endif() - endfunction() - - function(family_add_default_example_warnings TARGET) - target_compile_options(${TARGET} PUBLIC - -Wall - -Wextra - -Werror - -Wfatal-errors - -Wdouble-promotion - -Wfloat-equal - -Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wredundant-decls - #-Wstrict-prototypes - #-Werror-implicit-function-declaration - #-Wundef - ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - # GCC 10 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) - target_compile_options(${TARGET} PUBLIC -Wconversion) - endif() - - # GCC 8 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) - target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) - endif() - - # GCC 6 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) - target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) - endif() - endif() - endfunction() - - # configure an executable target to link to tinyusb in device mode, and add the board implementation - function(family_configure_device_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake - endfunction() - - # configure an executable target to link to tinyusb in host mode, and add the board implementation - function(family_configure_host_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake - endfunction() - - include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) - - if (NOT FAMILY_MCUS) - set(FAMILY_MCUS ${FAMILY}) - endif() - - # save it in case of re-inclusion - set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") +# Default to gcc +if(NOT DEFINED TOOLCHAIN) + set(TOOLCHAIN gcc) endif() + +if (NOT FAMILY) + message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line") +endif() + +if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) + message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") +endif() + +function(family_filter RESULT DIR) + get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) + + if (EXISTS "${DIR}/only.txt") + file(READ "${DIR}/only.txt" ONLYS) + # Replace newlines with semicolon so that it is treated as a list by CMake + string(REPLACE "\n" ";" ONLYS_LINES ${ONLYS}) + # For each mcu + foreach(MCU IN LISTS FAMILY_MCUS) + # For each line in only.txt + foreach(_line ${ONLYS_LINES}) + # If mcu:xxx exists for this mcu or board:xxx then include + if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}") + set(${RESULT} 1 PARENT_SCOPE) + return() + endif() + endforeach() + endforeach() + + # Didn't find it in only file so don't build + set(${RESULT} 0 PARENT_SCOPE) + + elseif (EXISTS "${DIR}/skip.txt") + file(READ "${DIR}/skip.txt" SKIPS) + # Replace newlines with semicolon so that it is treated as a list by CMake + string(REPLACE "\n" ";" SKIPS_LINES ${SKIPS}) + # For each mcu + foreach(MCU IN LISTS FAMILY_MCUS) + # For each line in only.txt + foreach(_line ${SKIPS_LINES}) + # If mcu:xxx exists for this mcu then skip + if (${_line} STREQUAL "mcu:${MCU}") + set(${RESULT} 0 PARENT_SCOPE) + return() + endif() + endforeach() + endforeach() + + # Didn't find in skip file so build + set(${RESULT} 1 PARENT_SCOPE) + + else() + + # Didn't find skip or only file so build + set(${RESULT} 1 PARENT_SCOPE) + + endif() + +endfunction() + +function(family_add_subdirectory DIR) + family_filter(SHOULD_ADD "${DIR}") + if (SHOULD_ADD) + add_subdirectory(${DIR}) + endif() +endfunction() + +function(family_get_project_name OUTPUT_NAME DIR) + get_filename_component(SHORT_NAME ${DIR} NAME) + set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) +endfunction() + +function(family_initialize_project PROJECT DIR) + family_filter(ALLOWED "${DIR}") + if (NOT ALLOWED) + get_filename_component(SHORT_NAME ${DIR} NAME) + message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") + endif() +endfunction() + +function(family_add_default_example_warnings TARGET) + target_compile_options(${TARGET} PUBLIC + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + -Wfloat-equal + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wredundant-decls + #-Wstrict-prototypes + #-Werror-implicit-function-declaration + #-Wundef + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0) + target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") + endif() + + # GCC 10 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) + target_compile_options(${TARGET} PUBLIC -Wconversion) + endif() + + # GCC 8 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) + target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) + endif() + + # GCC 6 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) + target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) + endif() + endif() +endfunction() + +# Add flash jlink target +function(family_flash_jlink TARGET) + if (NOT DEFINED JLINKEXE) + set(JLINKEXE JLinkExe) + endif () + + file(GENERATE + OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink + CONTENT "halt +loadfile $ +r +go +exit" + ) + + add_custom_target(${TARGET}-jlink + DEPENDS ${TARGET} + COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink + ) +endfunction() + +# Add flash pycod target +function(family_flash_pyocd TARGET) + if (NOT DEFINED PYOC) + set(PYOCD pyocd) + endif () + + add_custom_target(${TARGET}-pyocd + DEPENDS ${TARGET} + COMMAND ${PYOCD} flash -t ${PYOCD_TARGET} $ + ) +endfunction() + +# Add flash using NXP's LinkServer (redserver) +# https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/linkserver-for-microcontrollers:LINKERSERVER +function(family_flash_nxplink TARGET) + if (NOT DEFINED LINKSERVER) + set(LINKSERVER LinkServer) + endif () + + # LinkServer has a bug that can only execute with full path otherwise it throws: + # realpath error: No such file or directory + execute_process(COMMAND which ${LINKSERVER} OUTPUT_VARIABLE LINKSERVER_PATH OUTPUT_STRIP_TRAILING_WHITESPACE) + + add_custom_target(${TARGET}-nxplink + DEPENDS ${TARGET} + COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $ + ) +endfunction() + +# configure an executable target to link to tinyusb in device mode, and add the board implementation +function(family_configure_device_example TARGET) + # default implementation is empty, the function should be redefined in the FAMILY/family.cmake +endfunction() + +# configure an executable target to link to tinyusb in host mode, and add the board implementation +function(family_configure_host_example TARGET) + # default implementation is empty, the function should be redefined in the FAMILY/family.cmake +endfunction() + +include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) + +if (NOT FAMILY_MCUS) + set(FAMILY_MCUS ${FAMILY}) +endif() + +# save it in case of re-inclusion +set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index a475b4721..5261e5810 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -8,9 +8,12 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () +# TOP is path to root directory +set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_LIST_DIR}/../../../examples/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MIMXRT CACHE INTERNAL "") @@ -24,9 +27,6 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # only need to be built ONCE for all examples set(BOARD_TARGET board_${BOARD}) if (NOT TARGET ${BOARD_TARGET}) - # TOP is path to root directory - set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") - set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) @@ -132,37 +132,9 @@ function(family_configure_target TARGET) ) #---------- Flash ---------- - # Flash using pyocd - add_custom_target(${TARGET}-pyocd - DEPENDS ${TARGET} - COMMAND pyocd flash -t ${PYOCD_TARGET} $ - ) - - # Flash using NXP LinkServer (redlink) - # https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/linkserver-for-microcontrollers:LINKERSERVER - # LinkServer has a bug that can only execute with full path otherwise it throws: - # realpath error: No such file or directory - execute_process(COMMAND which LinkServer OUTPUT_VARIABLE LINKSERVER_PATH OUTPUT_STRIP_TRAILING_WHITESPACE) - add_custom_target(${TARGET}-nxplink - DEPENDS ${TARGET} - COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $ - ) - - # Flash using jlink - set(JLINKEXE JLinkExe) - file(GENERATE - OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink - CONTENT "halt -loadfile $ -r -go -exit" - ) - add_custom_target(${TARGET}-jlink - DEPENDS ${TARGET} - COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink - ) - + family_flash_jlink(${TARGET}) + family_flash_nxplink(${TARGET}) + family_flash_pyocd(${TARGET}) endfunction() diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 0ac2b6ce3..611c88eb5 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -8,9 +8,14 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () +# TOP is path to root directory +set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_LIST_DIR}/../../../examples/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") @@ -24,12 +29,6 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # only need to be built ONCE for all examples set(BOARD_TARGET board_${BOARD}) if (NOT TARGET ${BOARD_TARGET}) - # TOP is path to root directory - set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") - - set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) - set(CMSIS_DIR ${TOP}/lib/CMSIS_5) - add_library(${BOARD_TARGET} STATIC # external driver #lib/sct_neopixel/sct_neopixel.c @@ -129,20 +128,9 @@ function(family_configure_target TARGET) ) #---------- Flash ---------- - # Flash using pyocd - add_custom_target(${TARGET}-pyocd - COMMAND pyocd flash -t ${PYOCD_TARGET} $ - ) - - # Flash using NXP LinkServer (redlink) - # https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/linkserver-for-microcontrollers:LINKERSERVER - # LinkServer has a bug that can only execute with full path otherwise it throws: - # realpath error: No such file or directory - execute_process(COMMAND which LinkServer OUTPUT_VARIABLE LINKSERVER_PATH OUTPUT_STRIP_TRAILING_WHITESPACE) - add_custom_target(${TARGET}-nxplink - COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $ - ) - + family_flash_jlink(${TARGET}) + family_flash_nxplink(${TARGET}) + family_flash_pyocd(${TARGET}) endfunction() diff --git a/hw/bsp/nrf/boards/pca10095/board.mk b/hw/bsp/nrf/boards/pca10095/board.mk index 5ad103d62..9c4edbafc 100644 --- a/hw/bsp/nrf/boards/pca10095/board.mk +++ b/hw/bsp/nrf/boards/pca10095/board.mk @@ -1,3 +1,4 @@ +CPU_CORE = cortex-m33 MCU_VARIANT = nrf5340_application CFLAGS += -DNRF5340_XXAA -DNRF5340_XXAA_APPLICATION diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index c8faa23cc..9c43478e8 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -25,10 +25,11 @@ else () set(JLINK_DEVICE ${MCU_VARIANT}_xxaa) endif () -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS NRF5X CACHE INTERNAL "") + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -131,26 +132,7 @@ function(family_configure_target TARGET) ) #---------- Flash ---------- - # Flash using pyocd - add_custom_target(${TARGET}-pyocd - DEPENDS ${TARGET} - COMMAND pyocd flash -t ${PYOCD_TARGET} $ - ) - - # Flash using jlink - set(JLINKEXE JLinkExe) - file(GENERATE - OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink - CONTENT "halt -loadfile $ -r -go -exit" - ) - add_custom_target(${TARGET}-jlink - DEPENDS ${TARGET} - COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink - ) + family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index d5042a160..6d067e1c2 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -3,13 +3,12 @@ DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/nordic/nrfx include $(TOP)/$(BOARD_PATH)/board.mk +# nRF52 is cortex-m4, nRF53 is cortex-m33 +CPU_CORE ?= cortex-m4 +include $(TOP)/tools/make/cpu/$(CPU_CORE).mk + CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ -DCONFIG_GPIO_AS_PINRESET @@ -37,8 +36,5 @@ SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S ASFLAGS += -D__HEAP_SIZE=0 -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - # For flash-jlink target JLINK_DEVICE ?= $(MCU_VARIANT)_xxaa diff --git a/examples/cmake/cpu/cortex-m33.cmake b/tools/cmake/cpu/cortex-m33.cmake similarity index 100% rename from examples/cmake/cpu/cortex-m33.cmake rename to tools/cmake/cpu/cortex-m33.cmake diff --git a/examples/cmake/cpu/cortex-m4.cmake b/tools/cmake/cpu/cortex-m4.cmake similarity index 100% rename from examples/cmake/cpu/cortex-m4.cmake rename to tools/cmake/cpu/cortex-m4.cmake diff --git a/examples/cmake/cpu/cortex-m7.cmake b/tools/cmake/cpu/cortex-m7.cmake similarity index 100% rename from examples/cmake/cpu/cortex-m7.cmake rename to tools/cmake/cpu/cortex-m7.cmake diff --git a/examples/cmake/toolchain/arm_gcc.cmake b/tools/cmake/toolchain/arm_gcc.cmake similarity index 100% rename from examples/cmake/toolchain/arm_gcc.cmake rename to tools/cmake/toolchain/arm_gcc.cmake diff --git a/examples/cmake/toolchain/set_flags.cmake b/tools/cmake/toolchain/set_flags.cmake similarity index 100% rename from examples/cmake/toolchain/set_flags.cmake rename to tools/cmake/toolchain/set_flags.cmake diff --git a/tools/make/cpu/cortex-m33.mk b/tools/make/cpu/cortex-m33.mk new file mode 100644 index 000000000..2ea3a0753 --- /dev/null +++ b/tools/make/cpu/cortex-m33.mk @@ -0,0 +1,12 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m33 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + + #set(FREERTOS_PORT GCC_ARM_CM33_NONSECURE CACHE INTERNAL "") + FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure +else ifeq ($(TOOLCHAIN),iar) + # TODO support IAR +endif diff --git a/tools/make/cpu/cortex-m4.mk b/tools/make/cpu/cortex-m4.mk new file mode 100644 index 000000000..890feefe3 --- /dev/null +++ b/tools/make/cpu/cortex-m4.mk @@ -0,0 +1,12 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + + #set(FREERTOS_PORT GCC_ARM_CM4F CACHE INTERNAL "") + FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F +else ifeq ($(TOOLCHAIN),iar) + # TODO support IAR +endif diff --git a/tools/make/cpu/cortex-m7.mk b/tools/make/cpu/cortex-m7.mk new file mode 100644 index 000000000..504ffd486 --- /dev/null +++ b/tools/make/cpu/cortex-m7.mk @@ -0,0 +1,12 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + + #set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") + FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 +else ifeq ($(TOOLCHAIN),iar) + # TODO support IAR +endif