mirror/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-04-16 14:42:58 +00:00
Code Issues Packages Projects Releases Wiki Activity

da1469x_dk_xxx: Add VBUS handling

Browse Source 
Two BSPs with DA146xx MCUs are now adopted to
VBUS handling changed introduced to dcd_da146xx driver.

da14695_dk_usb as bus-powered devices informs driver that
VBUS is present at startup.

da1469x-dk-pro has VBUS change interrupt handler that
informs driver about VBUS changes.
This commit is contained in:
Jerzy Kasenberg 2021-09-17 11:48:38 +02:00
parent 6d8677a78a
commit a71ac71d7f
2 changed files with 33 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
hw/bsp/da14695_dk_usb/da14695_dk_usb.c
View File

@ -53,6 +53,9 @@ void UnhandledIRQ(void)
while(1);
}
// DA146xx driver function that must be called whenever VBUS changes.
extern void tusb_vbus_changed(bool present);
void board_init(void)
{
// LED
@ -70,7 +73,10 @@ void board_init(void)
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
NVIC_SetPriority(USB_IRQn, 2);
#if TUSB_OPT_DEVICE_ENABLED
// This board is USB powered there is no need to monitor
// VBUS line. Notify driver that VBUS is present.
tusb_vbus_changed(true);
/* Setup USB IRQ */
NVIC_SetPriority(USB_IRQn, 2);
@ -81,6 +87,7 @@ void board_init(void)
mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
#endif
}
//--------------------------------------------------------------------+

26
hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c
View File

@ -36,6 +36,21 @@ void USB_IRQHandler(void)
tud_int_handler(0);
}
#if TUSB_OPT_DEVICE_ENABLED
// DA146xx driver function that must be called whenever VBUS changes
extern void tusb_vbus_changed(bool present);
// VBUS change interrupt handler
void VBUS_IRQHandler(void)
{
bool present = (CRG_TOP->ANA_STATUS_REG & CRG_TOP_ANA_STATUS_REG_VBUS_AVAILABLE_Msk) != 0;
// Clear VBUS interrupt
CRG_TOP->VBUS_IRQ_CLEAR_REG = 1;
tusb_vbus_changed(present);
}
#endif
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
@ -70,7 +85,15 @@ void board_init(void)
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
NVIC_SetPriority(USB_IRQn, 2);
#if TUSB_OPT_DEVICE_ENABLED
// Setup interrupt for both connect and disconnect
CRG_TOP->VBUS_IRQ_MASK_REG = CRG_TOP_VBUS_IRQ_MASK_REG_VBUS_IRQ_EN_FALL_Msk |
CRG_TOP_VBUS_IRQ_MASK_REG_VBUS_IRQ_EN_RISE_Msk;
NVIC_SetPriority(VBUS_IRQn, 2);
// Trigger interrupt at the start to inform driver about VBUS state at start
// otherwise it could go unnoticed.
NVIC_SetPendingIRQ(VBUS_IRQn);
NVIC_EnableIRQ(VBUS_IRQn);
/* Setup USB IRQ */
NVIC_SetPriority(USB_IRQn, 2);
@ -81,6 +104,7 @@ void board_init(void)
mcu_gpio_set_pin_function(14, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
mcu_gpio_set_pin_function(15, MCU_GPIO_MODE_INPUT, MCU_GPIO_FUNC_USB);
#endif
}
//--------------------------------------------------------------------+