mirror of
https://github.com/hathach/tinyusb.git
synced 2025-02-21 21:41:09 +00:00
hathach
GitHub
commit
9cc355d302
@ -55,7 +55,7 @@ The stack supports the following MCUs
|
||||
- **Nordic:** nRF52840
|
||||
- **NXP:** LPC11Uxx, LPC13xx, LPC175x_6x, LPC177x_8x, LPC18xx, LPC40xx, LPC43xx, LPC51Uxx
|
||||
- **MicroChip:** SAMD21, SAMD51 (device only)
|
||||
- **ST:** STM32F0, STM32F4, STM32H7 (device only)
|
||||
- **ST:** STM32F0, STM32F3, STM32F4, STM32H7 (device only)
|
||||
|
||||
[Here is the list of supported Boards](docs/boards.md)
|
||||
|
||||
|
||||
@ -40,11 +40,13 @@ This code base already had supported for a handful of following boards
|
||||
- [Adafruit Metro M4 Express](https://www.adafruit.com/product/3382)
|
||||
|
||||
### ST STM32
|
||||
- [STM32F070RB Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f070rb.html)
|
||||
- [STM32F072b Discovery](https://www.st.com/en/evaluation-tools/32f072bdiscovery.html)
|
||||
- [STM32F407g Discovery](https://www.st.com/en/evaluation-tools/stm32f4discovery.html)
|
||||
- [STM32F411e Discovery](https://www.st.com/en/evaluation-tools/32f411ediscovery.html)
|
||||
- [STM32F412g Discovery](https://www.st.com/en/evaluation-tools/32f412gdiscovery.html)
|
||||
|
||||
- [STM32F070rb Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f070rb.html)
|
||||
- [STM32F072rb Discovery](https://www.st.com/en/evaluation-tools/32f072bdiscovery.html)
|
||||
- [STM32F303vc Discovery](https://www.st.com/en/evaluation-tools/stm32f3discovery.html)
|
||||
- [STM32F407vg Discovery](https://www.st.com/en/evaluation-tools/stm32f4discovery.html)
|
||||
- [STM32F411ve Discovery](https://www.st.com/en/evaluation-tools/32f411ediscovery.html)
|
||||
- [STM32F412zg Discovery](https://www.st.com/en/evaluation-tools/32f412gdiscovery.html)
|
||||
- [Nucleo H743zi](https://www.st.com/en/evaluation-tools/nucleo-h743zi.html)
|
||||
|
||||
## Add your own board
|
||||
|
||||
@ -2,7 +2,7 @@ CFLAGS += \
|
||||
-DHSE_VALUE=8000000 \
|
||||
-DSTM32F303xC \
|
||||
-mthumb \
|
||||
-mabi=aapcs-linux \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m4 \
|
||||
-mfloat-abi=hard \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
@ -20,6 +20,7 @@ SRC_C += \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f3xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f3xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f3xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f3xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f3xx_hal_gpio.c
|
||||
|
||||
SRC_S += \
|
||||
|
||||
@ -37,16 +37,28 @@
|
||||
#define BUTTON_PIN GPIO_PIN_0
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#endif
|
||||
|
||||
/* Configure the system clock to 72 MHz */
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
* System Clock source = PLL (HSE)
|
||||
* SYSCLK(Hz) = 72000000
|
||||
* HCLK(Hz) = 72000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 2
|
||||
* APB2 Prescaler = 1
|
||||
* HSE Frequency(Hz) = 8000000
|
||||
* HSE PREDIV = 1
|
||||
* PLLMUL = RCC_PLL_MUL9 (9)
|
||||
* Flash Latency(WS) = 2
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit;
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
@ -57,14 +69,32 @@ void board_init(void)
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Configures the USB clock */
|
||||
HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit);
|
||||
RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
|
||||
HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clocks dividers */
|
||||
clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
|
||||
|
||||
/* Enable Power Clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#endif
|
||||
|
||||
SystemClock_Config();
|
||||
|
||||
// Notify runtime of frequency change.
|
||||
SystemCoreClockUpdate();
|
||||
@ -86,27 +116,16 @@ void board_init(void)
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
/* Configure USB DM and DP pins */
|
||||
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF14_USB;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
// Start USB clock
|
||||
// Enable USB clock
|
||||
__HAL_RCC_USB_CLK_ENABLE();
|
||||
|
||||
#if 0
|
||||
RCC->AHB2ENR |= RCC_AHB2ENR_OTGFSEN;
|
||||
|
||||
// USB Pin Init
|
||||
// PA9- VUSB, PA10- ID, PA11- DM, PA12- DP
|
||||
// PC0- Power on
|
||||
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;
|
||||
GPIOA->MODER |= GPIO_MODER_MODE9_1 | GPIO_MODER_MODE10_1 | \
|
||||
GPIO_MODER_MODE11_1 | GPIO_MODER_MODE12_1;
|
||||
GPIOA->AFR[1] |= (10 << GPIO_AFRH_AFSEL9_Pos) | \
|
||||
(10 << GPIO_AFRH_AFSEL10_Pos) | (10 << GPIO_AFRH_AFSEL11_Pos) | \
|
||||
(10 << GPIO_AFRH_AFSEL12_Pos);
|
||||
|
||||
// Pullup required on ID, despite the manual claiming there's an
|
||||
// internal pullup already (page 1245, Rev 17)
|
||||
GPIOA->PUPDR |= GPIO_PUPDR_PUPD10_0;
|
||||
#endif
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user