Merge branch 'master' of github.com:microbuilder/tinyusb

Conflicts:
	demos/host/host_os_none/host_os_none.uvopt

demos/bsp/boards/microbuilder/board_lpc4357usb.c

@@ -69,7 +69,15 @@ void board_init(void)
   scu_pinmux(0x7, 5, MD_PDN, 0x5); /* P7_5 = TRACEDATA[1] */
   scu_pinmux(0x7, 6, MD_PDN, 0x5); /* P7_6 = TRACEDATA[2] */
   scu_pinmux(0x7, 7, MD_PDN, 0x5); /* P7_7 = TRACEDATA[3] */
+  
+  // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
+  scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7);		// USB0 VBus Power  
 
+  // 1.5Kohm pull-up resistor is needed on the USB DP data signal. GPIO28 (base), P9_5 (LPC4357) controls
+  //scu_pinmux(0x9, 5, MD_PUP|MD_EZI|MD_ZI, FUNC4);		// GPIO5[18]
+  //GPIO_SetDir(5, BIT_(18), 1); // output
+  //GPIO_ClearValue(5, BIT_(18));
+  
   /* Init I2C @ 400kHz */
   I2C_Init(LPC_I2C0, 400000);
   I2C_Cmd(LPC_I2C0, ENABLE);

demos/bsp/boards/microbuilder/board_lpc4357usb.h

@@ -63,7 +63,8 @@
 #include "lpc43xx_uart.h"
 #include "lpc43xx_i2c.h"
 
-#define CFG_PRINTF_TARGET       PRINTF_TARGET_UART
+#define CFG_PRINTF_TARGET       PRINTF_TARGET_SWO
+//#define CFG_PRINTF_TARGET       PRINTF_TARGET_UART
 
 #ifdef __cplusplus
  }

demos/bsp/boards/microbuilder/board_lpc4357usb_etminit.ini

@@ -0,0 +1,31 @@
+/*-------------------------------------------------------------------
+** Define the function to enable the trace port
+**-----------------------------------------------------------------*/
+FUNC void EnableTPIU(void) {
+
+  /* Configure TRACE pins for MCB4357 */
+  //_WDWORD(0x40086790, 0x000000B2);  // LPC_SCU->SFSPF_4 = 2;
+  //_WDWORD(0x40086794, 0x000000B3);  // LPC_SCU->SFSPF_5 = 3;
+  //_WDWORD(0x40086798, 0x000000B3);  // LPC_SCU->SFSPF_6 = 3;
+  //_WDWORD(0x4008679C, 0x000000B3);  // LPC_SCU->SFSPF_7 = 3;
+  //_WDWORD(0x400867A0, 0x000000B3);  // LPC_SCU->SFSPF_8 = 3;
+  
+  /* Configure TRACE pins for LPC4357USB */
+  _WDWORD(0x40086790, 0x000000B2);  // LPC_SCU->SFSPF_4 = 2 - TRACECLK
+  _WDWORD(0x40086390, 0x000000B5);  // LPC_SCU->SFSP7_4 = 5 - TRACEDATA[0]
+  _WDWORD(0x40086394, 0x000000B5);  // LPC_SCU->SFSP7_5 = 5 - TRACEDATA[1]
+  _WDWORD(0x40086398, 0x000000B5);  // LPC_SCU->SFSP7_6 = 5 - TRACEDATA[2]
+  _WDWORD(0x4008639C, 0x000000B5);  // LPC_SCU->SFSP7_7 = 5 - TRACEDATA[3]  
+}
+
+/*-------------------------------------------------------------------
+** Invoke the function at debugger startup
+**-----------------------------------------------------------------*/
+EnableTPIU();
+
+/*-------------------------------------------------------------------
+** Execute upon software RESET
+**-----------------------------------------------------------------*/
+FUNC void OnResetExec(void)  {
+  EnableTPIU();
+}

demos/host/host_os_none/host_os_none.uvproj

@@ -746,7 +746,7 @@
             <CpuDllArguments></CpuDllArguments>
             <PeripheralDll></PeripheralDll>
             <PeripheralDllArguments></PeripheralDllArguments>
-            <InitializationFile></InitializationFile>
+            <InitializationFile>..\..\bsp\boards\microbuilder\board_lpc4357usb_etminit.ini</InitializationFile>
             <Driver>Segger\JL2CM3.dll</Driver>
           </TargetDlls>
         </DebugOption>