mirror/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-03-14 04:18:56 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #985 from HiFiPhile/same70

Browse Source 
SAMx7x improvements
This commit is contained in:
Ha Thach 2021-08-06 11:32:57 +07:00 committed by GitHub
commit 88f5c04fe0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 2299 additions and 188 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
hw/bsp/same70_xplained/same70_xplained.c
View File

@ -59,51 +59,41 @@ static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr)
//------------- IMPLEMENTATION -------------//
void board_init(void)
{
init_mcu();
init_mcu();
/* Disable Watchdog */
hri_wdt_set_MR_WDDIS_bit(WDT);
/* Disable Watchdog */
hri_wdt_set_MR_WDDIS_bit(WDT);
// LED
_pmc_enable_periph_clock(ID_PIOC);
gpio_set_pin_level(LED_PIN, false);
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF);
// LED
_pmc_enable_periph_clock(ID_PIOC);
gpio_set_pin_level(LED_PIN, false);
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF);
// Button
_pmc_enable_periph_clock(ID_PIOA);
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF);
// Button
_pmc_enable_periph_clock(ID_PIOA);
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF);
// Uart via EDBG Com
_pmc_enable_periph_clock(ID_USART1);
gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1);
gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1);
// Uart via EDBG Com
_pmc_enable_periph_clock(ID_USART1);
gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1);
gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1);
usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async());
usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE);
usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM);
// usart_async_register_callback(&EDBG_COM, USART_ASYNC_RXC_CB, rx_cb_EDBG_COM);
usart_async_enable(&edbg_com);
usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async());
usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE);
usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM);
usart_async_enable(&edbg_com);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer (samd SystemCoreClock may not correct)
SysTick_Config(CONF_CPU_FREQUENCY / 1000);
#endif
#if 0
// USB Pin, Clock init
// Enable USB clock
_pmc_enable_periph_clock(ID_USBHS);
/* Clear SYSIO 10 & 11 for USB DM & DP */
hri_matrix_clear_CCFG_SYSIO_reg(MATRIX, CCFG_SYSIO_SYSIO10 | CCFG_SYSIO_SYSIO11);
// Enable clock
_pmc_enable_periph_clock(ID_UDP);
/* USB Device mode & Transceiver active */
hri_matrix_write_CCFG_USBMR_reg(MATRIX, CCFG_USBMR_USBMODE);
#endif
}
//--------------------------------------------------------------------+

2108
src/portable/microchip/samx7x/common_usb_regs.h Normal file
View File

File diff suppressed because it is too large Load Diff

323
src/portable/microchip/samx7x/dcd_samx7x.c
View File

@ -30,8 +30,8 @@
#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_SAMX7X
#include "device/dcd.h"
#include "sam.h"
#include "common_usb_regs.h"
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
@ -53,14 +53,7 @@
# endif
#endif
#define EP_MAX 10
#define USBHS_RAM_ADDR 0xA0100000u
#define EP_GET_FIFO_PTR(ep, scale) (((TU_XSTRCAT(TU_STRCAT(uint, scale),_t) (*)[0x8000 / ((scale) / 8)])USBHS_RAM_ADDR)[(ep)])
// Errata: The DMA feature is not available for Pipe/Endpoint 7
#define EP_DMA_SUPPORT(epnum) (epnum >= 1 && epnum <= 6)
#define EP_GET_FIFO_PTR(ep, scale) (((TU_XSTRCAT(TU_STRCAT(uint, scale),_t) (*)[0x8000 / ((scale) / 8)])FIFO_RAM_ADDR)[(ep)])
// DMA Channel Transfer Descriptor
typedef struct {
@ -84,9 +77,9 @@ static tusb_speed_t get_speed(void);
static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix);
// DMA descriptors shouldn't be placed in ITCM !
CFG_TUSB_MEM_SECTION dma_desc_t dma_desc[6];
CFG_TUSB_MEM_SECTION static dma_desc_t dma_desc[6];
xfer_ctl_t xfer_status[EP_MAX];
static xfer_ctl_t xfer_status[EP_MAX];
static const tusb_desc_endpoint_t ep0_desc =
{
@ -94,6 +87,18 @@ static const tusb_desc_endpoint_t ep0_desc =
.wMaxPacketSize = { .size = CFG_TUD_ENDPOINT0_SIZE },
};
TU_ATTR_ALWAYS_INLINE static inline void CleanInValidateCache(uint32_t *addr, int32_t size)
{
if (SCB->CCR & SCB_CCR_DC_Msk)
{
SCB_CleanInvalidateDCache_by_Addr(addr, size);
}
else
{
__DSB();
__ISB();
}
}
//------------------------------------------------------------------
// Device API
//------------------------------------------------------------------
@ -133,7 +138,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
void dcd_remote_wakeup (uint8_t rhport)
{
(void) rhport;
USBHS->USBHS_DEVCTRL |= USBHS_DEVCTRL_RMWKUP;
USB_REG->DEVCTRL |= DEVCTRL_RMWKUP;
}
// Connect by enabling internal pull-up resistor on D+/D-
@ -141,31 +146,29 @@ void dcd_connect(uint8_t rhport)
{
(void) rhport;
dcd_int_disable(rhport);
// Enable USB clock
PMC->PMC_PCER1 = 1 << (ID_USBHS - 32);
// Enable the USB controller in device mode
USBHS->USBHS_CTRL = USBHS_CTRL_UIMOD | USBHS_CTRL_USBE;
while (USBHS_SR_CLKUSABLE != (USBHS->USBHS_SR & USBHS_SR_CLKUSABLE));
USB_REG->CTRL = CTRL_UIMOD | CTRL_USBE;
while (!(USB_REG->SR & SR_CLKUSABLE));
#if TUD_OPT_HIGH_SPEED
USBHS->USBHS_DEVCTRL &= ~USBHS_DEVCTRL_SPDCONF_Msk;
USB_REG->DEVCTRL &= ~DEVCTRL_SPDCONF;
#else
USBHS->USBHS_DEVCTRL |= USBHS_DEVCTRL_SPDCONF_LOW_POWER;
USB_REG->DEVCTRL |= DEVCTRL_SPDCONF_LOW_POWER;
#endif
// Enable the End Of Reset, Suspend & Wakeup interrupts
USBHS->USBHS_DEVIER = (USBHS_DEVIER_EORSTES | USBHS_DEVIER_SUSPES | USBHS_DEVIER_WAKEUPES);
USB_REG->DEVIER = (DEVIER_EORSTES | DEVIER_SUSPES | DEVIER_WAKEUPES);
#if USE_SOF
USBHS->USBHS_DEVIER = USBHS_DEVIER_SOFES;
USB_REG->DEVIER = DEVIER_SOFES;
#endif
// Clear the End Of Reset, SOF & Wakeup interrupts
USBHS->USBHS_DEVICR = (USBHS_DEVICR_EORSTC | USBHS_DEVICR_SOFC | USBHS_DEVICR_WAKEUPC);
USB_REG->DEVICR = (DEVICR_EORSTC | DEVICR_SOFC | DEVICR_WAKEUPC);
// Manually set the Suspend Interrupt
USBHS->USBHS_DEVIFR |= USBHS_DEVIFR_SUSPS;
USB_REG->DEVIFR |= DEVIFR_SUSPS;
// Ack the Wakeup Interrupt
USBHS->USBHS_DEVICR = USBHS_DEVICR_WAKEUPC;
USB_REG->DEVICR = DEVICR_WAKEUPC;
// Attach the device
USBHS->USBHS_DEVCTRL &= ~USBHS_DEVCTRL_DETACH;
USB_REG->DEVCTRL &= ~DEVCTRL_DETACH;
// Freeze USB clock
USBHS->USBHS_CTRL |= USBHS_CTRL_FRZCLK;
USB_REG->CTRL |= CTRL_FRZCLK;
}
// Disconnect by disabling internal pull-up resistor on D+/D-
@ -174,49 +177,49 @@ void dcd_disconnect(uint8_t rhport)
(void) rhport;
dcd_int_disable(rhport);
// Disable all endpoints
USBHS->USBHS_DEVEPT &= ~(0x3FF << USBHS_DEVEPT_EPEN0_Pos);
USB_REG->DEVEPT &= ~(0x3FF << DEVEPT_EPEN0_Pos);
// Unfreeze USB clock
USBHS->USBHS_CTRL &= ~USBHS_CTRL_FRZCLK;
while (USBHS_SR_CLKUSABLE != (USBHS->USBHS_SR & USBHS_SR_CLKUSABLE));
USB_REG->CTRL &= ~CTRL_FRZCLK;
while (!(USB_REG->SR & SR_CLKUSABLE));
// Clear all the pending interrupts
USBHS->USBHS_DEVICR = USBHS_DEVICR_Msk;
USB_REG->DEVICR = DEVICR_Msk;
// Disable all interrupts
USBHS->USBHS_DEVIDR = USBHS_DEVCTRL_UADD_Msk;
USB_REG->DEVIDR = DEVIDR_Msk;
// Detach the device
USBHS->USBHS_DEVCTRL |= USBHS_DEVCTRL_DETACH;
USB_REG->DEVCTRL |= DEVCTRL_DETACH;
// Disable the device address
USBHS->USBHS_DEVCTRL &=~(USBHS_DEVCTRL_ADDEN | USBHS_DEVCTRL_UADD_Msk);
USB_REG->DEVCTRL &=~(DEVCTRL_ADDEN | DEVCTRL_UADD);
}
static tusb_speed_t get_speed(void)
{
switch ((USBHS->USBHS_SR & USBHS_SR_SPEED_Msk) >> USBHS_SR_SPEED_Pos) {
case USBHS_SR_SPEED_FULL_SPEED_Val:
switch (USB_REG->SR & SR_SPEED) {
case SR_SPEED_FULL_SPEED:
default:
return TUSB_SPEED_FULL;
case USBHS_SR_SPEED_HIGH_SPEED_Val:
case SR_SPEED_HIGH_SPEED:
return TUSB_SPEED_HIGH;
case USBHS_SR_SPEED_LOW_SPEED_Val:
case SR_SPEED_LOW_SPEED:
return TUSB_SPEED_LOW;
}
}
static void dcd_ep_handler(uint8_t ep_ix)
{
uint32_t int_status = USBHS->USBHS_DEVEPTISR[ep_ix];
int_status &= USBHS->USBHS_DEVEPTIMR[ep_ix];
uint32_t int_status = USB_REG->DEVEPTISR[ep_ix];
int_status &= USB_REG->DEVEPTIMR[ep_ix];
uint16_t count = (USBHS->USBHS_DEVEPTISR[ep_ix] &
USBHS_DEVEPTISR_BYCT_Msk) >> USBHS_DEVEPTISR_BYCT_Pos;
uint16_t count = (USB_REG->DEVEPTISR[ep_ix] &
DEVEPTISR_BYCT) >> DEVEPTISR_BYCT_Pos;
xfer_ctl_t *xfer = &xfer_status[ep_ix];
if (ep_ix == 0U)
{
static uint8_t ctrl_dir;
if (int_status & USBHS_DEVEPTISR_CTRL_RXSTPI)
if (int_status & DEVEPTISR_CTRL_RXSTPI)
{
ctrl_dir = (USBHS->USBHS_DEVEPTISR[0] & USBHS_DEVEPTISR_CTRL_CTRLDIR_Msk) >> USBHS_DEVEPTISR_CTRL_CTRLDIR_Pos;
ctrl_dir = (USB_REG->DEVEPTISR[0] & DEVEPTISR_CTRL_CTRLDIR) >> DEVEPTISR_CTRL_CTRLDIR_Pos;
// Setup packet should always be 8 bytes. If not, ignore it, and try again.
if (count == 8)
{
@ -224,10 +227,10 @@ static void dcd_ep_handler(uint8_t ep_ix)
dcd_event_setup_received(0, ptr, true);
}
// Ack and disable SETUP interrupt
USBHS->USBHS_DEVEPTICR[0] = USBHS_DEVEPTICR_CTRL_RXSTPIC;
USBHS->USBHS_DEVEPTIDR[0] = USBHS_DEVEPTIDR_CTRL_RXSTPEC;
USB_REG->DEVEPTICR[0] = DEVEPTICR_CTRL_RXSTPIC;
USB_REG->DEVEPTIDR[0] = DEVEPTIDR_CTRL_RXSTPEC;
}
if (int_status & USBHS_DEVEPTISR_RXOUTI)
if (int_status & DEVEPTISR_RXOUTI)
{
uint8_t *ptr = EP_GET_FIFO_PTR(0,8);
@ -248,24 +251,24 @@ static void dcd_ep_handler(uint8_t ep_ix)
xfer->queued_len = (uint16_t)(xfer->queued_len + count);
}
// Acknowledge the interrupt
USBHS->USBHS_DEVEPTICR[0] = USBHS_DEVEPTICR_RXOUTIC;
USB_REG->DEVEPTICR[0] = DEVEPTICR_RXOUTIC;
if ((count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len))
{
// RX COMPLETE
dcd_event_xfer_complete(0, 0, xfer->queued_len, XFER_RESULT_SUCCESS, true);
// Disable the interrupt
USBHS->USBHS_DEVEPTIDR[0] = USBHS_DEVEPTIDR_RXOUTEC;
USB_REG->DEVEPTIDR[0] = DEVEPTIDR_RXOUTEC;
// Re-enable SETUP interrupt
if (ctrl_dir == 1)
{
USBHS->USBHS_DEVEPTIER[0] = USBHS_DEVEPTIER_CTRL_RXSTPES;
USB_REG->DEVEPTIER[0] = DEVEPTIER_CTRL_RXSTPES;
}
}
}
if (int_status & USBHS_DEVEPTISR_TXINI)
if (int_status & DEVEPTISR_TXINI)
{
// Disable the interrupt
USBHS->USBHS_DEVEPTIDR[0] = USBHS_DEVEPTIDR_TXINEC;
USB_REG->DEVEPTIDR[0] = DEVEPTIDR_TXINEC;
if ((xfer->total_len != xfer->queued_len))
{
// TX not complete
@ -277,13 +280,13 @@ static void dcd_ep_handler(uint8_t ep_ix)
// Re-enable SETUP interrupt
if (ctrl_dir == 0)
{
USBHS->USBHS_DEVEPTIER[0] = USBHS_DEVEPTIER_CTRL_RXSTPES;
USB_REG->DEVEPTIER[0] = DEVEPTIER_CTRL_RXSTPES;
}
}
}
} else
{
if (int_status & USBHS_DEVEPTISR_RXOUTI)
if (int_status & DEVEPTISR_RXOUTI)
{
if (count && xfer->total_len)
{
@ -302,22 +305,22 @@ static void dcd_ep_handler(uint8_t ep_ix)
xfer->queued_len = (uint16_t)(xfer->queued_len + count);
}
// Clear the FIFO control flag to receive more data.
USBHS->USBHS_DEVEPTIDR[ep_ix] = USBHS_DEVEPTIDR_FIFOCONC;
USB_REG->DEVEPTIDR[ep_ix] = DEVEPTIDR_FIFOCONC;
// Acknowledge the interrupt
USBHS->USBHS_DEVEPTICR[ep_ix] = USBHS_DEVEPTICR_RXOUTIC;
USB_REG->DEVEPTICR[ep_ix] = DEVEPTICR_RXOUTIC;
if ((count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len))
{
// RX COMPLETE
dcd_event_xfer_complete(0, ep_ix, xfer->queued_len, XFER_RESULT_SUCCESS, true);
// Disable the interrupt
USBHS->USBHS_DEVEPTIDR[ep_ix] = USBHS_DEVEPTIDR_RXOUTEC;
USB_REG->DEVEPTIDR[ep_ix] = DEVEPTIDR_RXOUTEC;
// Though the host could still send, we don't know.
}
}
if (int_status & USBHS_DEVEPTISR_TXINI)
if (int_status & DEVEPTISR_TXINI)
{
// Acknowledge the interrupt
USBHS->USBHS_DEVEPTICR[ep_ix] = USBHS_DEVEPTICR_TXINIC;
USB_REG->DEVEPTICR[ep_ix] = DEVEPTICR_TXINIC;
if ((xfer->total_len != xfer->queued_len))
{
// TX not complete
@ -327,7 +330,7 @@ static void dcd_ep_handler(uint8_t ep_ix)
// TX complete
dcd_event_xfer_complete(0, 0x80 + ep_ix, xfer->total_len, XFER_RESULT_SUCCESS, true);
// Disable the interrupt
USBHS->USBHS_DEVEPTIDR[ep_ix] = USBHS_DEVEPTIDR_TXINEC;
USB_REG->DEVEPTIDR[ep_ix] = DEVEPTIDR_TXINEC;
}
}
}
@ -335,17 +338,17 @@ static void dcd_ep_handler(uint8_t ep_ix)
static void dcd_dma_handler(uint8_t ep_ix)
{
uint32_t status = USBHS->UsbhsDevdma[ep_ix - 1].USBHS_DEVDMASTATUS;
if (status & USBHS_DEVDMASTATUS_CHANN_ENB)
uint32_t status = USB_REG->DEVDMA[ep_ix - 1].DEVDMASTATUS;
if (status & DEVDMASTATUS_CHANN_ENB)
{
return; // Ignore EOT_STA interrupt
}
// Disable DMA interrupt
USBHS->USBHS_DEVIDR = USBHS_DEVIDR_DMA_1 << (ep_ix - 1);
USB_REG->DEVIDR = DEVIDR_DMA_1 << (ep_ix - 1);
xfer_ctl_t *xfer = &xfer_status[ep_ix];
uint16_t count = xfer->total_len - ((status & USBHS_DEVDMASTATUS_BUFF_COUNT_Msk) >> USBHS_DEVDMASTATUS_BUFF_COUNT_Pos);
if(USBHS->USBHS_DEVEPTCFG[ep_ix] & USBHS_DEVEPTCFG_EPDIR)
uint16_t count = xfer->total_len - ((status & DEVDMASTATUS_BUFF_COUNT) >> DEVDMASTATUS_BUFF_COUNT_Pos);
if(USB_REG->DEVEPTCFG[ep_ix] & DEVEPTCFG_EPDIR)
{
dcd_event_xfer_complete(0, 0x80 + ep_ix, count, XFER_RESULT_SUCCESS, true);
} else
@ -357,56 +360,56 @@ static void dcd_dma_handler(uint8_t ep_ix)
void dcd_int_handler(uint8_t rhport)
{
(void) rhport;
uint32_t int_status = USBHS->USBHS_DEVISR;
int_status &= USBHS->USBHS_DEVIMR;
uint32_t int_status = USB_REG->DEVISR;
int_status &= USB_REG->DEVIMR;
// End of reset interrupt
if (int_status & USBHS_DEVISR_EORST)
if (int_status & DEVISR_EORST)
{
// Unfreeze USB clock
USBHS->USBHS_CTRL &= ~USBHS_CTRL_FRZCLK;
while(USBHS_SR_CLKUSABLE != (USBHS->USBHS_SR & USBHS_SR_CLKUSABLE));
USB_REG->CTRL &= ~CTRL_FRZCLK;
while(!(USB_REG->SR & SR_CLKUSABLE));
// Reset all endpoints
for (int ep_ix = 1; ep_ix < EP_MAX; ep_ix++)
{
USBHS->USBHS_DEVEPT |= 1 << (USBHS_DEVEPT_EPRST0_Pos + ep_ix);
USBHS->USBHS_DEVEPT &=~(1 << (USBHS_DEVEPT_EPRST0_Pos + ep_ix));
USB_REG->DEVEPT |= 1 << (DEVEPT_EPRST0_Pos + ep_ix);
USB_REG->DEVEPT &=~(1 << (DEVEPT_EPRST0_Pos + ep_ix));
}
dcd_edpt_open (0, &ep0_desc);
USBHS->USBHS_DEVICR = USBHS_DEVICR_EORSTC;
USBHS->USBHS_DEVICR = USBHS_DEVICR_WAKEUPC;
USBHS->USBHS_DEVICR = USBHS_DEVICR_SUSPC;
USBHS->USBHS_DEVIER = USBHS_DEVIER_SUSPES;
USB_REG->DEVICR = DEVICR_EORSTC;
USB_REG->DEVICR = DEVICR_WAKEUPC;
USB_REG->DEVICR = DEVICR_SUSPC;
USB_REG->DEVIER = DEVIER_SUSPES;
dcd_event_bus_reset(rhport, get_speed(), true);
}
// End of Wakeup interrupt
if (int_status & USBHS_DEVISR_WAKEUP)
if (int_status & DEVISR_WAKEUP)
{
USBHS->USBHS_CTRL &= ~USBHS_CTRL_FRZCLK;
while (USBHS_SR_CLKUSABLE != (USBHS->USBHS_SR & USBHS_SR_CLKUSABLE));
USBHS->USBHS_DEVICR = USBHS_DEVICR_WAKEUPC;
USBHS->USBHS_DEVIDR = USBHS_DEVIDR_WAKEUPEC;
USBHS->USBHS_DEVIER = USBHS_DEVIER_SUSPES;
USB_REG->CTRL &= ~CTRL_FRZCLK;
while (!(USB_REG->SR & SR_CLKUSABLE));
USB_REG->DEVICR = DEVICR_WAKEUPC;
USB_REG->DEVIDR = DEVIDR_WAKEUPEC;
USB_REG->DEVIER = DEVIER_SUSPES;
dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
}
// Suspend interrupt
if (int_status & USBHS_DEVISR_SUSP)
if (int_status & DEVISR_SUSP)
{
// Unfreeze USB clock
USBHS->USBHS_CTRL &= ~USBHS_CTRL_FRZCLK;
while (USBHS_SR_CLKUSABLE != (USBHS->USBHS_SR & USBHS_SR_CLKUSABLE));
USBHS->USBHS_DEVICR = USBHS_DEVICR_SUSPC;
USBHS->USBHS_DEVIDR = USBHS_DEVIDR_SUSPEC;
USBHS->USBHS_DEVIER = USBHS_DEVIER_WAKEUPES;
USBHS->USBHS_CTRL |= USBHS_CTRL_FRZCLK;
USB_REG->CTRL &= ~CTRL_FRZCLK;
while (!(USB_REG->SR & SR_CLKUSABLE));
USB_REG->DEVICR = DEVICR_SUSPC;
USB_REG->DEVIDR = DEVIDR_SUSPEC;
USB_REG->DEVIER = DEVIER_WAKEUPES;
USB_REG->CTRL |= CTRL_FRZCLK;
dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true);
}
#if USE_SOF
if(int_status & USBHS_DEVISR_SOF)
if(int_status & DEVISR_SOF)
{
USBHS->USBHS_DEVICR = USBHS_DEVICR_SOFC;
USB_REG->DEVICR = DEVICR_SOFC;
dcd_event_bus_signal(0, DCD_EVENT_SOF, true);
}
@ -414,7 +417,7 @@ void dcd_int_handler(uint8_t rhport)
// Endpoints interrupt
for (int ep_ix = 0; ep_ix < EP_MAX; ep_ix++)
{
if (int_status & (USBHS_DEVISR_PEP_0 << ep_ix))
if (int_status & (DEVISR_PEP_0 << ep_ix))
{
dcd_ep_handler(ep_ix);
}
@ -424,7 +427,7 @@ void dcd_int_handler(uint8_t rhport)
{
if (EP_DMA_SUPPORT(ep_ix))
{
if (int_status & (USBHS_DEVISR_DMA_1 << (ep_ix - 1)))
if (int_status & (DEVISR_DMA_1 << (ep_ix - 1)))
{
dcd_dma_handler(ep_ix);
}
@ -447,7 +450,7 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re
{
uint8_t const dev_addr = (uint8_t) request->wValue;
USBHS->USBHS_DEVCTRL |= dev_addr | USBHS_DEVCTRL_ADDEN;
USB_REG->DEVCTRL |= dev_addr | DEVCTRL_ADDEN;
}
}
@ -472,29 +475,29 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
}
xfer_status[epnum].max_packet_size = epMaxPktSize;
USBHS->USBHS_DEVEPT |= 1 << (USBHS_DEVEPT_EPRST0_Pos + epnum);
USBHS->USBHS_DEVEPT &=~(1 << (USBHS_DEVEPT_EPRST0_Pos + epnum));
USB_REG->DEVEPT |= 1 << (DEVEPT_EPRST0_Pos + epnum);
USB_REG->DEVEPT &=~(1 << (DEVEPT_EPRST0_Pos + epnum));
if (epnum == 0)
{
// Enable the control endpoint - Endpoint 0
USBHS->USBHS_DEVEPT |= USBHS_DEVEPT_EPEN0;
USB_REG->DEVEPT |= DEVEPT_EPEN0;
// Configure the Endpoint 0 configuration register
USBHS->USBHS_DEVEPTCFG[0] =
USB_REG->DEVEPTCFG[0] =
(
USBHS_DEVEPTCFG_EPSIZE(fifoSize) |
USBHS_DEVEPTCFG_EPTYPE(TUSB_XFER_CONTROL) |
USBHS_DEVEPTCFG_EPBK(USBHS_DEVEPTCFG_EPBK_1_BANK) |
USBHS_DEVEPTCFG_ALLOC
(fifoSize << DEVEPTCFG_EPSIZE_Pos) |
(TUSB_XFER_CONTROL << DEVEPTCFG_EPTYPE_Pos) |
(DEVEPTCFG_EPBK_1_BANK << DEVEPTCFG_EPBK_Pos) |
DEVEPTCFG_ALLOC
);
USBHS->USBHS_DEVEPTIER[0] = USBHS_DEVEPTIER_RSTDTS;
USBHS->USBHS_DEVEPTIDR[0] = USBHS_DEVEPTIDR_CTRL_STALLRQC;
if (USBHS_DEVEPTISR_CFGOK == (USBHS->USBHS_DEVEPTISR[0] & USBHS_DEVEPTISR_CFGOK))
USB_REG->DEVEPTIER[0] = DEVEPTIER_RSTDTS;
USB_REG->DEVEPTIDR[0] = DEVEPTIDR_CTRL_STALLRQC;
if (DEVEPTISR_CFGOK == (USB_REG->DEVEPTISR[0] & DEVEPTISR_CFGOK))
{
// Endpoint configuration is successful
USBHS->USBHS_DEVEPTIER[0] = USBHS_DEVEPTIER_CTRL_RXSTPES;
USB_REG->DEVEPTIER[0] = DEVEPTIER_CTRL_RXSTPES;
// Enable Endpoint 0 Interrupts
USBHS->USBHS_DEVIER = USBHS_DEVIER_PEP_0;
USB_REG->DEVIER = DEVIER_PEP_0;
return true;
} else
{
@ -504,34 +507,34 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
} else
{
// Enable the endpoint
USBHS->USBHS_DEVEPT |= ((0x01 << epnum) << USBHS_DEVEPT_EPEN0_Pos);
USB_REG->DEVEPT |= ((0x01 << epnum) << DEVEPT_EPEN0_Pos);
// Set up the maxpacket size, fifo start address fifosize
// and enable the interrupt. CLear the data toggle.
// AUTOSW is needed for DMA ack !
USBHS->USBHS_DEVEPTCFG[epnum] =
USB_REG->DEVEPTCFG[epnum] =
(
USBHS_DEVEPTCFG_EPSIZE(fifoSize) |
USBHS_DEVEPTCFG_EPTYPE(eptype) |
USBHS_DEVEPTCFG_EPBK(USBHS_DEVEPTCFG_EPBK_1_BANK) |
USBHS_DEVEPTCFG_AUTOSW |
((dir & 0x01) << USBHS_DEVEPTCFG_EPDIR_Pos)
(fifoSize << DEVEPTCFG_EPSIZE_Pos) |
(eptype << DEVEPTCFG_EPTYPE_Pos) |
(DEVEPTCFG_EPBK_1_BANK << DEVEPTCFG_EPBK_Pos) |
DEVEPTCFG_AUTOSW |
((dir & 0x01) << DEVEPTCFG_EPDIR_Pos)
);
if (eptype == TUSB_XFER_ISOCHRONOUS)
{
USBHS->USBHS_DEVEPTCFG[epnum] |= USBHS_DEVEPTCFG_NBTRANS(1);
USB_REG->DEVEPTCFG[epnum] |= DEVEPTCFG_NBTRANS_1_TRANS;
}
#if USE_DUAL_BANK
if (eptype == TUSB_XFER_ISOCHRONOUS || eptype == TUSB_XFER_BULK)
{
USBHS->USBHS_DEVEPTCFG[epnum] |= USBHS_DEVEPTCFG_EPBK_2_BANK;
USB_REG->DEVEPTCFG[epnum] |= DEVEPTCFG_EPBK_2_BANK;
}
#endif
USBHS->USBHS_DEVEPTCFG[epnum] |= USBHS_DEVEPTCFG_ALLOC;
USBHS->USBHS_DEVEPTIER[epnum] = USBHS_DEVEPTIER_RSTDTS;
USBHS->USBHS_DEVEPTIDR[epnum] = USBHS_DEVEPTIDR_CTRL_STALLRQC;
if (USBHS_DEVEPTISR_CFGOK == (USBHS->USBHS_DEVEPTISR[epnum] & USBHS_DEVEPTISR_CFGOK))
USB_REG->DEVEPTCFG[epnum] |= DEVEPTCFG_ALLOC;
USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RSTDTS;
USB_REG->DEVEPTIDR[epnum] = DEVEPTIDR_CTRL_STALLRQC;
if (DEVEPTISR_CFGOK == (USB_REG->DEVEPTISR[epnum] & DEVEPTISR_CFGOK))
{
USBHS->USBHS_DEVIER = ((0x01 << epnum) << USBHS_DEVIER_PEP_0_Pos);
USB_REG->DEVIER = ((0x01 << epnum) << DEVIER_PEP_0_Pos);
return true;
} else
{
@ -547,9 +550,9 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr)
uint8_t const epnum = tu_edpt_number(ep_addr);
// Disable endpoint interrupt
USBHS->USBHS_DEVIDR = 1 << (USBHS_DEVIDR_PEP_0_Pos + epnum);
USB_REG->DEVIDR = 1 << (DEVIDR_PEP_0_Pos + epnum);
// Disable EP
USBHS->USBHS_DEVEPT &=~(1 << (USBHS_DEVEPT_EPEN0_Pos + epnum));
USB_REG->DEVEPT &=~(1 << (DEVEPT_EPEN0_Pos + epnum));
}
static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix)
@ -577,13 +580,13 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix)
if (ep_ix == 0U)
{
// Control endpoint: clear the interrupt flag to send the data
USBHS->USBHS_DEVEPTICR[0] = USBHS_DEVEPTICR_TXINIC;
USB_REG->DEVEPTICR[0] = DEVEPTICR_TXINIC;
} else
{
// Other endpoint types: clear the FIFO control flag to send the data
USBHS->USBHS_DEVEPTIDR[ep_ix] = USBHS_DEVEPTIDR_FIFOCONC;
USB_REG->DEVEPTIDR[ep_ix] = DEVEPTIDR_FIFOCONC;
}
USBHS->USBHS_DEVEPTIER[ep_ix] = USBHS_DEVEPTIER_TXINES;
USB_REG->DEVEPTIER[ep_ix] = DEVEPTIER_TXINES;
}
// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack
@ -602,23 +605,26 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
if (EP_DMA_SUPPORT(epnum) && total_bytes != 0)
{
uint32_t udd_dma_ctrl = USBHS_DEVDMACONTROL_BUFF_LENGTH(total_bytes);
// Force the CPU to flush the buffer. We increase the size by 32 because the call aligns the
// address to 32-byte boundaries.
CleanInValidateCache((uint32_t*) tu_align((uint32_t) buffer, 4), total_bytes + 31);
uint32_t udd_dma_ctrl = total_bytes << DEVDMACONTROL_BUFF_LENGTH_Pos;
if (dir == TUSB_DIR_OUT)
{
udd_dma_ctrl |= USBHS_DEVDMACONTROL_END_TR_IT | USBHS_DEVDMACONTROL_END_TR_EN;
udd_dma_ctrl |= DEVDMACONTROL_END_TR_IT | DEVDMACONTROL_END_TR_EN;
} else {
udd_dma_ctrl |= USBHS_DEVDMACONTROL_END_B_EN;
udd_dma_ctrl |= DEVDMACONTROL_END_B_EN;
}
USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMAADDRESS = (uint32_t)buffer;
udd_dma_ctrl |= USBHS_DEVDMACONTROL_END_BUFFIT | USBHS_DEVDMACONTROL_CHANN_ENB;
USB_REG->DEVDMA[epnum - 1].DEVDMAADDRESS = (uint32_t)buffer;
udd_dma_ctrl |= DEVDMACONTROL_END_BUFFIT | DEVDMACONTROL_CHANN_ENB;
// Disable IRQs to have a short sequence
// between read of EOT_STA and DMA enable
uint32_t irq_state = __get_PRIMASK();
__disable_irq();
if (!(USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMASTATUS & USBHS_DEVDMASTATUS_END_TR_ST))
if (!(USB_REG->DEVDMA[epnum - 1].DEVDMASTATUS & DEVDMASTATUS_END_TR_ST))
{
USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMACONTROL = udd_dma_ctrl;
USBHS->USBHS_DEVIER = USBHS_DEVIER_DMA_1 << (epnum - 1);
USB_REG->DEVDMA[epnum - 1].DEVDMACONTROL = udd_dma_ctrl;
USB_REG->DEVIER = DEVIER_DMA_1 << (epnum - 1);
__set_PRIMASK(irq_state);
return true;
}
@ -632,7 +638,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
{
if (dir == TUSB_DIR_OUT)
{
USBHS->USBHS_DEVEPTIER[epnum] = USBHS_DEVEPTIER_RXOUTES;
USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RXOUTES;
} else
{
dcd_transmit_packet(xfer,epnum);
@ -663,45 +669,52 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16
if (EP_DMA_SUPPORT(epnum) && total_bytes != 0)
{
tu_fifo_buffer_info_t info;
uint32_t udd_dma_ctrl_lin = USBHS_DEVDMACONTROL_CHANN_ENB;
uint32_t udd_dma_ctrl_wrap = USBHS_DEVDMACONTROL_CHANN_ENB | USBHS_DEVDMACONTROL_END_BUFFIT;
uint32_t udd_dma_ctrl_lin = DEVDMACONTROL_CHANN_ENB;
uint32_t udd_dma_ctrl_wrap = DEVDMACONTROL_CHANN_ENB | DEVDMACONTROL_END_BUFFIT;
if (dir == TUSB_DIR_OUT)
{
tu_fifo_get_write_info(ff, &info);
udd_dma_ctrl_lin |= USBHS_DEVDMACONTROL_END_TR_IT | USBHS_DEVDMACONTROL_END_TR_EN;
udd_dma_ctrl_wrap |= USBHS_DEVDMACONTROL_END_TR_IT | USBHS_DEVDMACONTROL_END_TR_EN;
udd_dma_ctrl_lin |= DEVDMACONTROL_END_TR_IT | DEVDMACONTROL_END_TR_EN;
udd_dma_ctrl_wrap |= DEVDMACONTROL_END_TR_IT | DEVDMACONTROL_END_TR_EN;
} else {
tu_fifo_get_read_info(ff, &info);
if(info.len_wrap == 0)
{
udd_dma_ctrl_lin |= USBHS_DEVDMACONTROL_END_B_EN;
udd_dma_ctrl_lin |= DEVDMACONTROL_END_B_EN;
}
udd_dma_ctrl_wrap |= USBHS_DEVDMACONTROL_END_B_EN;
udd_dma_ctrl_wrap |= DEVDMACONTROL_END_B_EN;
}
USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMAADDRESS = (uint32_t)info.ptr_lin;
// Clean invalidate cache of linear part
CleanInValidateCache((uint32_t*) tu_align((uint32_t) info.ptr_lin, 4), info.len_lin + 31);
USB_REG->DEVDMA[epnum - 1].DEVDMAADDRESS = (uint32_t)info.ptr_lin;
if (info.len_wrap)
{
// Clean invalidate cache of wrapped part
CleanInValidateCache((uint32_t*) tu_align((uint32_t) info.ptr_wrap, 4), info.len_wrap + 31);
dma_desc[epnum - 1].next_desc = 0;
dma_desc[epnum - 1].buff_addr = (uint32_t)info.ptr_wrap;
dma_desc[epnum - 1].chnl_ctrl =
udd_dma_ctrl_wrap | USBHS_DEVDMACONTROL_BUFF_LENGTH(info.len_wrap);
udd_dma_ctrl_lin |= USBHS_DEVDMASTATUS_DESC_LDST;
__DSB();
__ISB();
USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMANXTDSC = (uint32_t)&dma_desc[epnum - 1];
udd_dma_ctrl_wrap | (info.len_wrap << DEVDMACONTROL_BUFF_LENGTH_Pos);
// Clean cache of wrapped DMA descriptor
CleanInValidateCache((uint32_t*)&dma_desc[epnum - 1], sizeof(dma_desc_t));
udd_dma_ctrl_lin |= DEVDMASTATUS_DESC_LDST;
USB_REG->DEVDMA[epnum - 1].DEVDMANXTDSC = (uint32_t)&dma_desc[epnum - 1];
} else {
udd_dma_ctrl_lin |= USBHS_DEVDMACONTROL_END_BUFFIT;
udd_dma_ctrl_lin |= DEVDMACONTROL_END_BUFFIT;
}
udd_dma_ctrl_lin |= USBHS_DEVDMACONTROL_BUFF_LENGTH(info.len_lin);
udd_dma_ctrl_lin |= (info.len_lin << DEVDMACONTROL_BUFF_LENGTH_Pos);
// Disable IRQs to have a short sequence
// between read of EOT_STA and DMA enable
uint32_t irq_state = __get_PRIMASK();
__disable_irq();
if (!(USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMASTATUS & USBHS_DEVDMASTATUS_END_TR_ST))
if (!(USB_REG->DEVDMA[epnum - 1].DEVDMASTATUS & DEVDMASTATUS_END_TR_ST))
{
USBHS->UsbhsDevdma[epnum - 1].USBHS_DEVDMACONTROL = udd_dma_ctrl_lin;
USBHS->USBHS_DEVIER = USBHS_DEVIER_DMA_1 << (epnum - 1);
USB_REG->DEVDMA[epnum - 1].DEVDMACONTROL = udd_dma_ctrl_lin;
USB_REG->DEVIER = DEVIER_DMA_1 << (epnum - 1);
__set_PRIMASK(irq_state);
return true;
}
@ -715,7 +728,7 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16
{
if (dir == TUSB_DIR_OUT)
{
USBHS->USBHS_DEVEPTIER[epnum] = USBHS_DEVEPTIER_RXOUTES;
USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RXOUTES;
} else
{
dcd_transmit_packet(xfer,epnum);
@ -729,11 +742,11 @@ void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
USBHS->USBHS_DEVEPTIER[epnum] = USBHS_DEVEPTIER_CTRL_STALLRQS;
USB_REG->DEVEPTIER[epnum] = DEVEPTIER_CTRL_STALLRQS;
// Re-enable SETUP interrupt
if (epnum == 0)
{
USBHS->USBHS_DEVEPTIER[0] = USBHS_DEVEPTIER_CTRL_RXSTPES;
USB_REG->DEVEPTIER[0] = DEVEPTIER_CTRL_RXSTPES;
}
}
@ -742,8 +755,8 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
USBHS->USBHS_DEVEPTIDR[epnum] = USBHS_DEVEPTIDR_CTRL_STALLRQC;
USBHS->USBHS_DEVEPTIER[epnum] = USBHS_HSTPIPIER_RSTDTS;
USB_REG->DEVEPTIDR[epnum] = DEVEPTIDR_CTRL_STALLRQC;
USB_REG->DEVEPTIER[epnum] = HSTPIPIER_RSTDTS;
}
#endif