diff --git a/CHANGELOG.rst b/CHANGELOG.rst new file mode 100644 index 000000000..80205a721 --- /dev/null +++ b/CHANGELOG.rst @@ -0,0 +1,513 @@ +********* +Changelog +********* + +0.10.1 (03-06-221) +=================== + +- rework rp2040 examples and CMake build, allow better integration with pico-sdk + +Host Controller Driver (HCD) +---------------------------- + +- Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes +- Improve hub driver +- Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer() +- Use hcd_frame_number() instead of micro frame +- Fix OHCI endpoint address and xferred_bytes in xfer complete event + + +0.10.0 (28-05-2021) +=================== + +- Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode +- Improve audio_test example and add audio_4_channel_mic example +- Add new dfu example +- Remove pico-sdk from submodule + +Device Controller Driver (DCD) +------------------------------ + +- Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A) +- Add new DCD port Renesas RX63N, board GR-CITRUS +- Add new (optional) endpoint API dcd_edpt_xfer_fifo +- Fix build with nRF5340 +- Fix build with lpc15 and lpc54 +- Fix build with lpc177x_8x +- STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API +- Support LPC55 port1 highspeed +- Add support for Espressif esp32s3 +- nRF: fix race condition that could cause drop packet of Bulk OUT transfer + +USB Device Driver (USBD) +------------------------ + +- Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo + +Device Class Driver +------------------- + +CDC + +- [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter. + +DFU + +- Add new DFU 1.1 class driver (WIP) + +HID + +- Fix keyboard report descriptor template +- Add more hid keys constant from 0x6B to 0xA4 +- [Breaking] rename API + - HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE + - tud_hid_boot_mode() to tud_hid_get_protocol() + - tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb() + +MIDI + +- Fix MIDI buffer overflow issue +- [Breaking] rename API + - Rename tud_midi_read() to tud_midi_stream_read() + - Rename tud_midi_write() to tud_midi_stream_write() + - Rename tud_midi_receive() to tud_midi_packet_read() + - Rename tud_midi_send() to tud_midi_packet_write() + +Host Controller Driver (HCD) +---------------------------- + +- No noticable changes + +USB Host Driver (USBH) +---------------------- + +- No noticable changes + +Host Class Driver +----------------- + +- HID: Rework host hid driver, basically everything changes + + +0.9.0 (12-03-2021) +================== + +Device Stack +------------ + +Device Controller Driver (DCD) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +RP2040 + +- Fix endpoint buffer reallocation overrun problem +- Fix osal_pico queue overflow in initialization +- Fix Isochronous endpoint buffer size in transfer +- Optimize hardware endpoint struct to reduce RAM usage +- Fix enum walkaround forever check for SE0 when pull up is disabled + +Sony CXD56 + +- Pass the correct speed on Spresense +- Fix setup processed flag + +NXP Transdimention + +- Update dcd_init() to reset controller to device mode + +USB Device Driver (USBD) +^^^^^^^^^^^^^^^^^^^^^^^^ + +- Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint. +- Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64 +- Ack SET_INTERFACE even if it is not implemented by class driver. + +Device Class Driver +^^^^^^^^^^^^^^^^^^^ + +DFU Runtime + +- rename dfu_rt to dfu_runtime for easy reading + +CDC + +- Add tud_cdc_send_break_cb() to support break request +- Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo + +HID + +- [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes + - tud_hid_descriptor_report_cb() + - tud_hid_get_report_cb() + - tud_hid_set_report_cb() + - tud_hid_boot_mode_cb() + - tud_hid_set_idle_cb() +- Add report complete callback tud_hid_report_complete_cb() API +- Add DPad/Hat support for HID Gamepad + - `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad + - Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum + - Add Gamepad to hid_composite / hid_composite_freertos example + +MIDI + +- Fix dropping MIDI sysex message when fifo is full +- Fix typo in tud_midi_write24(), make example less ambigous for cable and channel +- Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7) + +Host Stack +---------- + +Host Controller Driver (HCD) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +- Add rhport to hcd_init() +- Improve EHCI/OHCI driver abstraction + - Move echi/ohci files to portable/ + - Rename hcd_lpc18_43 to hcd_transdimension + - Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr() +- Update NXP transdimention hcd_init() to reset controller to host mode + - Ported hcd to rt10xx + +USB Host Driver (USBH) +^^^^^^^^^^^^^^^^^^^^^^ + +- No noticeable changes to usbh + +Host Class Driver +^^^^^^^^^^^^^^^^^ + +MSC + +- Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry() +- Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming +- Change tuh_msc_is_busy() to tuh_msc_ready() +- Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10() +- Read_Capacity is invoked as part of enumeration process +- Add tuh_msc_get_block_count(), tuh_msc_get_block_size() +- Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities + +Others +------ + +- Add basic support for rt-thread OS +- Change zero bitfield length to more explicit padding +- Build example now fetch required submodules on the fly while running `make` without prio submodule init for mcu drivers +- Update pico-sdk to v1.1.0 + +**New Boards** + +- Microchip SAM E54 Xplained Pro +- LPCXpresso 55s28 +- LPCXpresso 18s37 + + +0.8.0 (05-02-2021) +================== + +Device Controller Driver +------------------------ + +- Added new device support for Raspberry Pi RP2040 +- Added new device support for NXP Kinetis KL25ZXX +- Use dcd_event_bus_reset() with link speed to replace bus_signal +- ESP32-S2: + - Add bus suspend and wakeup support +- SAMD21: + - Fix (walkaround) samd21 setup_packet overflow by USB DMA +- STM32 Synopsys: + - Rework USB FIFO allocation scheme and allow RX FIFO size reduction +- Sony CXD56 + - Update Update Spresense SDK to 2.0.2 + - Fix dcd issues with setup packets + - Correct EP number for cdc_msc example + +USB Device +---------- + +**USBD** + +- Rework usbd control transfer to have additional stage parameter for setup, data, status +- Fix tusb_init() return true instead of TUSB_ERROR_NONE +- Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet + +**Class Driver** + +- CDC + - Allow to transmit data, even if the host does not support control line states i.e set DTR +- HID + - change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64 +- MIDI + - Fix midi sysex sending bug +- MSC + - Invoke only scsi complete callback after status transaction is complete. + - Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error. +- USBTMC + - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu + +**Example** + +- Support make from windows cmd.exe +- Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples + + +USB Host +-------- + +No noticeable changes to host stack + +New Boards +---------- + +- NXP/Freescale Freedom FRDM-KL25Z +- Feather Double M33 express +- Raspberry Pi Pico +- Adafruit Feather RP2040 +- Adafruit Itsy Bitsy RP2040 +- Adafruit QT RP2040 +- Adfruit Feather ESP32-S2 +- Adafruit Magtag 29" Eink +- Adafruit Metro ESP32-S2 +- Adafruit PyBadge +- Adafruit PyPortal +- Great Scott Gadgets' LUNA D11 & D21 + + +0.7.0 (08-11-2020) +================== + +Device Controller Driver +------------------------ + +- Added new support for Espressif ESP32-S2 +- Added new support for Dialog DA1469x +- Enhance STM32 Synopsys +- Support bus events disconnection/suspend/resume/wakeup + - Improve transfer performance with optimizing xfer and fifo size + - Support Highspeed port (OTG_HS) with both internal and external PHY + - Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY) + - Add ISO transfer, fix odd/even frame + - Fix FIFO flush during stall + - Implement dcd_edpt_close() API + - Support F105, F107 +- Enhance STM32 fsdev + - Improve dcd fifo allocation + - Fix ISTR race condition + - Support remap USB IRQ on supported MCUs + - Implement dcd_edpt_close() API +- Enhance NUC 505: enhance set configure behavior +- Enhance SAMD + - Fix race condition with setup packet + - Add SAMD11 option `OPT_MCU_SAMD11` + - Add SAME5x option `OPT_MCU_SAME5X` +- Fix SAMG control data toggle and stall race condition +- Enhance nRF + - Fix hanged when tud_task() is called within critical section (disabled interrupt) + - Fix disconnect bus event not submitted + - Implement ISO transfer and dcd_edpt_close() + + +USB Device +---------- + +**USBD** + +- Add new class driver for **Bluetooth HCI** class driver with example can be found in [mynewt-tinyusb-example](https://github.com/hathach/mynewt-tinyusb-example) since it needs mynewt OS to run with. +- Fix USBD endpoint usage racing condition with `usbd_edpt_claim()/usbd_edpt_release()` +- Added `tud_task_event_ready()` and `osal_queue_empty()`. This API is needed to check before enter low power mode with WFI/WFE +- Rename USB IRQ Handler to `dcd_int_handler()`. Application must define IRQ handler in which it calls this API. +- Add `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D- on supported MCUs. +- Add `usbd_edpt_open()` +- Remove `dcd_set_config()` +- Add *OPT_OS_CUMSTOM* as hook for application to overwrite and/or add their own OS implementation +- Support SET_INTERFACE, GET_INTERFACE request +- Add Logging for debug with optional uart/rtt/swo printf retarget or `CFG_TUSB_DEBUG_PRINTF` hook +- Add IAR compiler support +- Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument +- Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()` +- Enhance class driver management + - `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver + - Add application implemented class driver via `usbd_app_driver_get_cb()` + - IAD is handled to assign driver id +- Added `tud_descriptor_device_qualifier_cb()` callback +- Optimize `tu_fifo` bulk write/read transfer +- Forward non-std control request to class driver +- Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string) +- Fix OSAL FreeRTOS yield from ISR + +**Class Drivers** + +- USBNET: remove ACM-EEM due to lack of support from host +- USBTMC: fix descriptors when INT EP is disabled +- CDC: + - Send zero length packet for end of data when needed + - Add `tud_cdc_tx_complete_cb()` callback + - Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo +- MIDI: + - Add packet interface + - Add multiple jack descriptors + - Fix MIDI driver for sysex +- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request +- Rename some configure macro to make it clear that those are used directly for endpoint transfer + - CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE + - CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE + - CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE + - CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE +- HID: + - Fix gamepad template descriptor + - Add multiple HID interface API + - Add extra comma to HID_REPORT_ID + +USB Host +-------- + +- Rework USB host stack (still work in progress) + - Fix compile error with pipehandle + - Rework usbh control and enumeration as non-blocking +- Improve Hub, MSC, HID host driver + +Examples +-------- + +- Add new hid_composite_freertos +- Add new dynamic_configuration to demonstrate how to switch configuration descriptors +- Add new hid_multiple_interface +- Enhance `net_lwip_webserver` example + - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) + - Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver +- Added new Audio example: audio_test uac2_headsest + +New Boards +---------- + +- Espressif ESP32-S2: saola_1, kaluga_1 +- STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo +- Dialog DA1469x dk pro and dk usb +- Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro +- nRF: ItsyBitsy nRF52840 + + +0.6.0 (30-03-2020) +================== + +Added **CONTRIBUTORS.md** to give proper credit for contributors to the stack. Special thanks to `Nathan Conrad `__ , `Peter Lawrence `__ , `William D. Jones `__ and `Sean Cross `__ and others for spending their precious time to add lots of features and ports for this release. + +Added +----- + +**MCU** + +- Added support for Microchip SAMG55 +- Added support for Nordic nRF52833 +- Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505 +- Added support for NXP LPC: 51Uxx, 54xxx, 55xx +- Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 +- Added support for Sony CXD56 (Spresense) +- Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7 +- Added support for TI MSP430 +- Added support for ValentyUSB's eptri + +**Class Driver** + +- Added DFU Runtime class driver +- Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress) +- Added USBTMC class driver +- Added WebUSB class driver using vendor-specific class +- Added multiple instances support for CDC and MIDI +- Added a handful of unit test with Ceedling. +- Added LOG support for debugging with CFG_TUSB_DEBUG +- Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1) +- Added `dcd_edpt0_status_complete()` as optional API for DCD + +**Examples** + +Following examples are added: + +- board_test +- cdc_dual_ports +- dfu_rt +- hid_composite +- net_lwip_webserver +- usbtmc +- webusb_serial + +**Boards** + +Following boards are added: + +- adafruit_clue +- arduino_nano33_ble +- circuitplayground_bluefruit +- circuitplayground_express +- feather_m0_express +- feather_nrf52840_sense +- feather_stm32f405 +- fomu +- itsybitsy_m0 +- itsybitsy_m4 +- lpcxpresso11u37 +- lpcxpresso1549 +- lpcxpresso51u68 +- lpcxpresso54114 +- lpcxpresso55s69 +- mbed1768 +- mimxrt1010_evk +- mimxrt1015_evk +- mimxrt1020_evk +- mimxrt1050_evkb +- mimxrt1060_evk +- mimxrt1064_evk +- msp_exp430f5529lp +- ngx4330 +- nrf52840_mdk_dongle +- nutiny_nuc121s +- nutiny_nuc125s +- nutiny_nuc126v +- nutiny_sdk_nuc120 +- nutiny_sdk_nuc505 +- pca10059 +- pca10100 +- pyboardv11 +- raytac_mdbt50q_rx +- samg55xplained +- seeeduino_xiao +- spresense +- stm32f070rbnucleo +- stm32f072disco +- stm32f103bluepill +- stm32f207nucleo +- stm32f401blackpill +- stm32f411blackpill +- stm32f411disco +- stm32f412disco +- stm32f767nucleo +- stm32h743nucleo +- stm32l0538disco +- stm32l476disco +- teensy_40 + +Changed +------- + +- Changed `tud_descriptor_string_cb()` to have additional Language ID argument +- Merged hal_nrf5x.c into dcd_nrf5x.c +- Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c +- Generalized dcd_stm32f4.c to dcd_synopsys.c +- Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs +- Improved DCD SAMD stability, fix missing setup packet occasionally +- Improved usbd/usbd_control with proper hanlding of zero-length packet (ZLP) +- Improved STM32 DCD FSDev +- Improved STM32 DCD Synopsys +- Migrated CI from Travis to Github Action +- Updated nrfx submodule to 2.1.0 +- Fixed mynewt osal queue definition +- Fixed cdc_msc_freertos example build for all MCUs + + +0.5.0 (06-2019) +=============== + +First release, device stack works great, host stack works but still need improvement. + +- Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc... +- Thanks to @cr1901 for adding STM32F4 port. +- Thanks to @PTS93 and @todbot for HID raw API