mirror/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-02-11 18:40:45 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #1065 from hathach/rp2040-compliance

Browse Source 
Rp2040 compliance test
This commit is contained in:
Ha Thach 2021-09-01 20:18:01 +07:00 committed by GitHub
commit 831a45f14b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 77 additions and 114 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
src/class/msc/msc_device.c
View File

@ -323,7 +323,11 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t
if ( p_msc->stage == MSC_STAGE_CMD )
{
// part of reset recovery (probably due to invalid CBW) -> prepare for new command
TU_ASSERT( prepare_cbw(rhport, p_msc) );
// Note: skip if already queued previously
if ( usbd_edpt_ready(rhport, p_msc->ep_out) )
{
TU_ASSERT( prepare_cbw(rhport, p_msc) );
}
}
}
}

3
src/common/tusb_common.h
View File

@ -110,6 +110,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte2(uint32_t u32) { return
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte1(uint32_t u32) { return TU_U32_BYTE1(u32); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u32_byte0(uint32_t u32) { return TU_U32_BYTE0(u32); }
TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_u32_high16(uint32_t u32) { return (uint16_t) (u32 >> 16); }
TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_u32_low16 (uint32_t u32) { return (uint16_t) (u32 & 0x0000ffffu); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u16_high(uint16_t u16) { return TU_U16_HIGH(u16); }
TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_u16_low (uint16_t u16) { return TU_U16_LOW(u16); }

2
src/device/dcd.h
View File

@ -153,7 +153,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer
// This API is optional, may be useful for register-based for transferring data.
bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) TU_ATTR_WEAK;
// Stall endpoint
// Stall endpoint, any queuing transfer should be removed from endpoint
void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr);
// clear stall, data toggle is also reset to DATA0

25
src/device/usbd.c
View File

@ -1333,26 +1333,33 @@ bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr)
void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
{
TU_LOG(USBD_DBG, " Stall EP %02X\r\n", ep_addr);
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
dcd_edpt_stall(rhport, ep_addr);
_usbd_dev.ep_status[epnum][dir].stalled = true;
_usbd_dev.ep_status[epnum][dir].busy = true;
// only stalled if currently cleared
if ( !_usbd_dev.ep_status[epnum][dir].stalled )
{
TU_LOG(USBD_DBG, " Stall EP %02X\r\n", ep_addr);
dcd_edpt_stall(rhport, ep_addr);
_usbd_dev.ep_status[epnum][dir].stalled = true;
_usbd_dev.ep_status[epnum][dir].busy = true;
}
}
void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
{
TU_LOG(USBD_DBG, " Clear Stall EP %02X\r\n", ep_addr);
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
dcd_edpt_clear_stall(rhport, ep_addr);
_usbd_dev.ep_status[epnum][dir].stalled = false;
_usbd_dev.ep_status[epnum][dir].busy = false;
// only clear if currently stalled
if ( _usbd_dev.ep_status[epnum][dir].stalled )
{
TU_LOG(USBD_DBG, " Clear Stall EP %02X\r\n", ep_addr);
dcd_edpt_clear_stall(rhport, ep_addr);
_usbd_dev.ep_status[epnum][dir].stalled = false;
_usbd_dev.ep_status[epnum][dir].busy = false;
}
}
bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr)

3
src/device/usbd_pvt.h
View File

@ -81,7 +81,7 @@ bool usbd_edpt_claim(uint8_t rhport, uint8_t ep_addr);
// Release an endpoint without submitting a transfer
bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr);
// Check if endpoint transferring is complete
// Check if endpoint is busy transferring
bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr);
// Stall endpoint
@ -93,6 +93,7 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr);
// Check if endpoint is stalled
bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr);
// Check if endpoint is ready (not busy and not stalled)
TU_ATTR_ALWAYS_INLINE static inline
bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr)
{

83
src/portable/raspberrypi/rp2040/dcd_rp2040.c
View File

@ -124,9 +124,7 @@ static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t t
// For device, IN is a tx transfer and OUT is an rx transfer
ep->rx = (dir == TUSB_DIR_OUT);
// Response to a setup packet on EP0 starts with pid of 1
ep->next_pid = (num == 0 ? 1u : 0u);
ep->next_pid = 0u;
ep->wMaxPacketSize = wMaxPacketSize;
ep->transfer_type = transfer_type;
@ -145,8 +143,7 @@ static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t t
if ( num == 0 )
{
// EP0 has no endpoint control register because
// the buffer offsets are fixed
// EP0 has no endpoint control register because the buffer offsets are fixed
ep->endpoint_control = NULL;
// Buffer offset is fixed (also double buffered)
@ -178,7 +175,7 @@ static void hw_endpoint_xfer(uint8_t ep_addr, uint8_t *buffer, uint16_t total_by
static void hw_handle_buff_status(void)
{
uint32_t remaining_buffers = usb_hw->buf_status;
pico_trace("buf_status 0x%08x\n", remaining_buffers);
pico_trace("buf_status = 0x%08x\n", remaining_buffers);
uint bit = 1u;
for (uint i = 0; remaining_buffers && i < USB_MAX_ENDPOINTS * 2; i++)
{
@ -186,8 +183,10 @@ static void hw_handle_buff_status(void)
{
// clear this in advance
usb_hw_clear->buf_status = bit;
// IN transfer for even i, OUT transfer for odd i
struct hw_endpoint *ep = hw_endpoint_get_by_num(i >> 1u, !(i & 1u));
// Continue xfer
bool done = hw_endpoint_xfer_continue(ep);
if (done)
@ -202,7 +201,7 @@ static void hw_handle_buff_status(void)
}
}
static void reset_ep0(void)
static void reset_ep0_pid(void)
{
// If we have finished this transfer on EP0 set pid back to 1 for next
// setup transfer. Also clear a stall in case
@ -214,14 +213,18 @@ static void reset_ep0(void)
}
}
static void reset_all_endpoints(void)
static void reset_non_control_endpoints(void)
{
memset(hw_endpoints, 0, sizeof(hw_endpoints));
next_buffer_ptr = &usb_dpram->epx_data[0];
// Disable all non-control
for ( uint8_t i = 0; i < USB_MAX_ENDPOINTS-1; i++ )
{
usb_dpram->ep_ctrl[i].in = 0;
usb_dpram->ep_ctrl[i].out = 0;
}
// Init Control endpoint out & in
hw_endpoint_init(0x0, 64, TUSB_XFER_CONTROL);
hw_endpoint_init(0x80, 64, TUSB_XFER_CONTROL);
// clear non-control hw endpoints
tu_memclr(hw_endpoints[1], sizeof(hw_endpoints) - 2*sizeof(hw_endpoint_t));
next_buffer_ptr = &usb_dpram->epx_data[0];
}
static void dcd_rp2040_irq(void)
@ -233,8 +236,10 @@ static void dcd_rp2040_irq(void)
{
handled |= USB_INTS_SETUP_REQ_BITS;
uint8_t const *setup = (uint8_t const *)&usb_dpram->setup_packet;
// Clear stall bits and reset pid
reset_ep0();
// reset pid to both 1 (data and ack)
reset_ep0_pid();
// Pass setup packet to tiny usb
dcd_event_setup_received(0, setup, true);
usb_hw_clear->sie_status = USB_SIE_STATUS_SETUP_REC_BITS;
@ -274,7 +279,7 @@ static void dcd_rp2040_irq(void)
handled |= USB_INTS_BUS_RESET_BITS;
usb_hw->dev_addr_ctrl = 0;
reset_all_endpoints();
reset_non_control_endpoints();
dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
usb_hw_clear->sie_status = USB_SIE_STATUS_BUS_RESET_BITS;
@ -325,7 +330,6 @@ static void dcd_rp2040_irq(void)
void dcd_init (uint8_t rhport)
{
pico_trace("dcd_init %d\n", rhport);
assert(rhport == 0);
// Reset hardware to default state
@ -338,8 +342,13 @@ void dcd_init (uint8_t rhport)
irq_set_exclusive_handler(USBCTRL_IRQ, dcd_rp2040_irq);
// reset endpoints
reset_all_endpoints();
// Init control endpoints
tu_memclr(hw_endpoints[0], 2*sizeof(hw_endpoint_t));
hw_endpoint_init(0x0, 64, TUSB_XFER_CONTROL);
hw_endpoint_init(0x80, 64, TUSB_XFER_CONTROL);
// Init non-control endpoints
reset_non_control_endpoints();
// Initializes the USB peripheral for device mode and enables it.
// Don't need to enable the pull up here. Force VBUS
@ -370,12 +379,10 @@ void dcd_int_disable(uint8_t rhport)
void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
{
pico_trace("dcd_set_address %d %d\n", rhport, dev_addr);
assert(rhport == 0);
// Can't set device address in hardware until status xfer has complete
// Send 0len complete response on EP0 IN
reset_ep0();
hw_endpoint_xfer(0x80, NULL, 0);
}
@ -389,17 +396,15 @@ void dcd_remote_wakeup(uint8_t rhport)
// disconnect by disabling internal pull-up resistor on D+/D-
void dcd_disconnect(uint8_t rhport)
{
pico_info("dcd_disconnect %d\n", rhport);
assert(rhport == 0);
usb_hw_clear->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS;
(void) rhport;
usb_hw_clear->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS;
}
// connect by enabling internal pull-up resistor on D+/D-
void dcd_connect(uint8_t rhport)
{
pico_info("dcd_connect %d\n", rhport);
assert(rhport == 0);
usb_hw_set->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS;
(void) rhport;
usb_hw_set->sie_ctrl = USB_SIE_CTRL_PULLUP_EN_BITS;
}
/*------------------------------------------------------------------*/
@ -414,11 +419,8 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re
request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD &&
request->bRequest == TUSB_REQ_SET_ADDRESS )
{
pico_trace("Set HW address %d\n", request->wValue);
usb_hw->dev_addr_ctrl = (uint8_t) request->wValue;
}
reset_ep0();
}
bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
@ -431,7 +433,9 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
void dcd_edpt_close_all (uint8_t rhport)
{
(void) rhport;
// TODO implement dcd_edpt_close_all()
// may need to use EP Abort
reset_non_control_endpoints();
}
bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
@ -443,8 +447,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t
void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
{
pico_trace("dcd_edpt_stall %02x\n", ep_addr);
assert(rhport == 0);
(void) rhport;
if ( tu_edpt_number(ep_addr) == 0 )
{
@ -454,22 +457,22 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr);
// TODO check with double buffered
_hw_endpoint_buffer_control_set_mask32(ep, USB_BUF_CTRL_STALL);
// stall and clear current pending buffer
// may need to use EP_ABORT
_hw_endpoint_buffer_control_set_value32(ep, USB_BUF_CTRL_STALL);
}
void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
{
pico_trace("dcd_edpt_clear_stall %02x\n", ep_addr);
assert(rhport == 0);
(void) rhport;
if (tu_edpt_number(ep_addr))
{
struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr);
// clear stall also reset toggle to DATA0
// TODO check with double buffered
_hw_endpoint_buffer_control_clear_mask32(ep, USB_BUF_CTRL_STALL | USB_BUF_CTRL_DATA1_PID);
// clear stall also reset toggle to DATA0, ready for next transfer
ep->next_pid = 0;
_hw_endpoint_buffer_control_clear_mask32(ep, USB_BUF_CTRL_STALL);
}
}

3
src/portable/raspberrypi/rp2040/hcd_rp2040.c
View File

@ -201,7 +201,6 @@ static void hcd_rp2040_irq(void)
{
handled |= USB_INTS_BUFF_STATUS_BITS;
TU_LOG(2, "Buffer complete\n");
// print_bufctrl32(*epx.buffer_control);
hw_handle_buff_status();
}
@ -231,7 +230,7 @@ static void hcd_rp2040_irq(void)
if (status & USB_INTS_ERROR_DATA_SEQ_BITS)
{
usb_hw_clear->sie_status = USB_SIE_STATUS_DATA_SEQ_ERROR_BITS;
print_bufctrl32(*epx.buffer_control);
TU_LOG(3, " Seq Error: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(*epx.buffer_control), tu_u32_high16(*epx.buffer_control));
panic("Data Seq Error \n");
}

11
src/portable/raspberrypi/rp2040/rp2040_usb.c
View File

@ -67,7 +67,6 @@ void rp2040_usb_init(void)
void hw_endpoint_reset_transfer(struct hw_endpoint *ep)
{
ep->stalled = false;
ep->active = false;
ep->remaining_len = 0;
ep->xferred_len = 0;
@ -171,8 +170,7 @@ static void _hw_endpoint_start_next_buffer(struct hw_endpoint *ep)
*ep->endpoint_control = ep_ctrl;
TU_LOG(3, "Prepare Buffer Control:\r\n");
print_bufctrl32(buf_ctrl);
TU_LOG(3, " Prepare BufCtrl: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
// Finally, write to buffer_control which will trigger the transfer
// the next time the controller polls this dpram address
@ -231,7 +229,7 @@ static uint16_t sync_ep_buffer(struct hw_endpoint *ep, uint8_t buf_id)
// Short packet
if (xferred_bytes < ep->wMaxPacketSize)
{
pico_trace("Short rx transfer on buffer %d with %u bytes\n", buf_id, xferred_bytes);
pico_trace(" Short packet on buffer %d with %u bytes\n", buf_id, xferred_bytes);
// Reduce total length as this is last packet
ep->remaining_len = 0;
}
@ -245,8 +243,7 @@ static void _hw_endpoint_xfer_sync (struct hw_endpoint *ep)
// after a buff status interrupt
uint32_t buf_ctrl = _hw_endpoint_buffer_control_get_value32(ep);
TU_LOG(3, "_hw_endpoint_xfer_sync:\r\n");
print_bufctrl32(buf_ctrl);
TU_LOG(3, " Sync BufCtrl: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
// always sync buffer 0
uint16_t buf0_bytes = sync_ep_buffer(ep, 0);
@ -284,7 +281,7 @@ static void _hw_endpoint_xfer_sync (struct hw_endpoint *ep)
usb_hw->abort &= ~TU_BIT(ep_id);
TU_LOG(3, "----SHORT PACKET buffer0 on EP %02X:\r\n", ep->ep_addr);
print_bufctrl32(buf_ctrl);
TU_LOG(3, " BufCtrl: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl));
#endif
}
}

55
src/portable/raspberrypi/rp2040/rp2040_usb.h
View File

@ -21,7 +21,7 @@
#define pico_trace(...) TU_LOG(3, __VA_ARGS__)
// Hardware information per endpoint
struct hw_endpoint
typedef struct hw_endpoint
{
// Is this a valid struct
bool configured;
@ -42,9 +42,6 @@ struct hw_endpoint
// Buffer pointer in usb dpram
uint8_t *hw_data_buf;
// Have we been stalled TODO remove later
bool stalled;
// Current transfer information
bool active;
uint16_t remaining_len;
@ -66,7 +63,7 @@ struct hw_endpoint
// If interrupt endpoint
uint8_t interrupt_num;
#endif
};
} hw_endpoint_t;
void rp2040_usb_init(void);
@ -96,52 +93,4 @@ static inline uintptr_t hw_data_offset(uint8_t *buf)
extern const char *ep_dir_string[];
typedef union TU_ATTR_PACKED
{
uint16_t u16;
struct TU_ATTR_PACKED
{
uint16_t xfer_len : 10;
uint16_t available : 1;
uint16_t stall : 1;
uint16_t reset_bufsel : 1;
uint16_t data_toggle : 1;
uint16_t last_buf : 1;
uint16_t full : 1;
};
} rp2040_buffer_control_t;
TU_VERIFY_STATIC(sizeof(rp2040_buffer_control_t) == 2, "size is not correct");
#if CFG_TUSB_DEBUG >= 3
static inline void print_bufctrl16(uint32_t u16)
{
rp2040_buffer_control_t bufctrl = {
.u16 = u16
};
TU_LOG(3, "len = %u, available = %u, full = %u, last = %u, stall = %u, reset = %u, toggle = %u\r\n",
bufctrl.xfer_len, bufctrl.available, bufctrl.full, bufctrl.last_buf, bufctrl.stall, bufctrl.reset_bufsel, bufctrl.data_toggle);
}
static inline void print_bufctrl32(uint32_t u32)
{
uint16_t u16;
u16 = u32 >> 16;
TU_LOG(3, " Buffer Control 1 0x%x: ", u16);
print_bufctrl16(u16);
u16 = u32 & 0x0000ffff;
TU_LOG(3, " Buffer Control 0 0x%x: ", u16);
print_bufctrl16(u16);
}
#else
#define print_bufctrl16(u16)
#define print_bufctrl32(u32)
#endif
#endif