mirror of
https://github.com/hathach/tinyusb.git
synced 2025-03-14 04:18:56 +00:00
Remap USB IRQs on STM32F303 BSP
This commit is contained in:
parent
f914e48d25
commit
7fda95f508
@ -31,27 +31,29 @@
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
// USB defaults to using interrupts 19, 20, and 42 (based on SYSCFG_CFGR1.USB_IT_RMP)
|
||||
// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the
|
||||
// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76.
|
||||
|
||||
// FIXME: Do all three need to be handled, or just the LP one?
|
||||
// USB high-priority interrupt (Channel 19): Triggered only by a correct
|
||||
// USB high-priority interrupt (Channel 74): Triggered only by a correct
|
||||
// transfer event for isochronous and double-buffer bulk transfer to reach
|
||||
// the highest possible transfer rate.
|
||||
void USB_HP_CAN_TX_IRQHandler(void)
|
||||
void USB_HP_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
|
||||
// USB low-priority interrupt (Channel 20): Triggered by all USB events
|
||||
// USB low-priority interrupt (Channel 75): Triggered by all USB events
|
||||
// (Correct transfer, USB reset, etc.). The firmware has to check the
|
||||
// interrupt source before serving the interrupt.
|
||||
void USB_LP_CAN_RX0_IRQHandler(void)
|
||||
void USB_LP_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
|
||||
// USB wakeup interrupt (Channel 42): Triggered by the wakeup event from the USB
|
||||
// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB
|
||||
// Suspend mode.
|
||||
void USBWakeUp_IRQHandler(void)
|
||||
void USBWakeUp_RMP_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
@ -127,6 +129,10 @@ void board_init(void)
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#endif
|
||||
|
||||
// Remap the USB interrupts
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
__HAL_REMAPINTERRUPT_USB_ENABLE();
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
Loading…
x
Reference in New Issue
Block a user