use separate buffer for ctrl transfer.

This commit is contained in:
HiFiPhile 2024-04-26 13:40:13 +02:00
parent 9ef3755f03
commit 7fb8d3341c

View File

@ -52,7 +52,7 @@ typedef struct
CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_EP_BUFSIZE];
CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_EP_BUFSIZE];
CFG_TUSB_MEM_ALIGN uint8_t set_report_buf[CFG_TUD_HID_EP_BUFSIZE];
CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf[CFG_TUD_HID_EP_BUFSIZE];
// TODO save hid descriptor since host can specifically request this after enumeration
// Note: HID descriptor may be not available from application after enumeration
@ -296,7 +296,7 @@ bool hidd_control_xfer_cb (uint8_t rhport, uint8_t stage, tusb_control_request_t
uint8_t const report_type = tu_u16_high(request->wValue);
uint8_t const report_id = tu_u16_low(request->wValue);
uint8_t* report_buf = p_hid->epin_buf;
uint8_t* report_buf = p_hid->ctrl_buf;
uint16_t req_len = tu_min16(request->wLength, CFG_TUD_HID_EP_BUFSIZE);
uint16_t xferlen = 0;
@ -313,22 +313,22 @@ bool hidd_control_xfer_cb (uint8_t rhport, uint8_t stage, tusb_control_request_t
xferlen += tud_hid_get_report_cb(hid_itf, report_id, (hid_report_type_t) report_type, report_buf, req_len);
TU_ASSERT( xferlen > 0 );
tud_control_xfer(rhport, request, p_hid->epin_buf, xferlen);
tud_control_xfer(rhport, request, p_hid->ctrl_buf, xferlen);
}
break;
case HID_REQ_CONTROL_SET_REPORT:
if ( stage == CONTROL_STAGE_SETUP )
{
TU_VERIFY(request->wLength <= sizeof(p_hid->set_report_buf));
tud_control_xfer(rhport, request, p_hid->set_report_buf, request->wLength);
TU_VERIFY(request->wLength <= sizeof(p_hid->ctrl_buf));
tud_control_xfer(rhport, request, p_hid->ctrl_buf, request->wLength);
}
else if ( stage == CONTROL_STAGE_ACK )
{
uint8_t const report_type = tu_u16_high(request->wValue);
uint8_t const report_id = tu_u16_low(request->wValue);
uint8_t const* report_buf = p_hid->set_report_buf;
uint8_t const* report_buf = p_hid->ctrl_buf;
uint16_t report_len = tu_min16(request->wLength, CFG_TUD_HID_EP_BUFSIZE);
// If host request a specific Report ID, extract report ID in buffer before invoking callback