addding cmake support for u5

.idea/cmake.xml

@@ -55,6 +55,7 @@
       <configuration PROFILE_NAME="portenta_c33" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=portenta_c33 -DLOG=3" />
       <configuration PROFILE_NAME="metro_m4_express" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=metro_m4_express -DLOG=3 -DLOGGER=RTT -DMAX3421_HOST=1" />
       <configuration PROFILE_NAME="metro_m0_express" ENABLED="false" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=metro_m0_express -DLOG=3 -DLOGGER=RTT -DMAX3421_HOST=1" />
+      <configuration PROFILE_NAME="stm32u5" ENABLED="true" CONFIG_NAME="Debug" GENERATION_OPTIONS="-DBOARD=stm32u575eval" />
     </configurations>
   </component>
 </project>

hw/bsp/stm32g4/family.cmake

@@ -36,10 +36,10 @@ function(add_board_target BOARD_TARGET)
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
-      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
       ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
@@ -50,11 +50,6 @@ function(add_board_target BOARD_TARGET)
       ${ST_CMSIS}/Include
       ${ST_HAL_DRIVER}/Inc
       )
-    target_compile_options(${BOARD_TARGET} PUBLIC
-      )
-    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      )
-
     update_board(${BOARD_TARGET})
 
     if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
@@ -62,8 +57,7 @@ function(add_board_target BOARD_TARGET)
         "LINKER:--script=${LD_FILE_GNU}"
         -nostartfiles
         # nanolib
-        --specs=nosys.specs
+        --specs=nosys.specs --specs=nano.specs
-        --specs=nano.specs
         )
     elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
       target_link_options(${BOARD_TARGET} PUBLIC

hw/bsp/stm32u5/boards/stm32u575eval/board.cmake

@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32u575xx)
+set(JLINK_DEVICE stm32u575ai)
+
+set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U575xx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32U575xx
+    )
+endfunction()

hw/bsp/stm32u5/boards/stm32u575eval/board.mk

@@ -7,4 +7,4 @@ LD_FILE = $(BOARD_PATH)/STM32U575AIIXQ_FLASH.ld
 SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s
 
 # For flash-jlink target
-JLINK_DEVICE = stm32u575
+JLINK_DEVICE = stm32u575ai

hw/bsp/stm32u5/family.c

@@ -25,7 +25,18 @@
  * This file is part of the TinyUSB stack.
  */
 
+// Suppress warning caused by mcu driver
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wundef"
+#endif
+
 #include "stm32u5xx_hal.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
 #include "bsp/board_api.h"
 #include "board.h"
 

hw/bsp/stm32u5/family.cmake

@@ -0,0 +1,216 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY u5)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32U5 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32G4 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    #${TOP}/src/portable/st/typec/typec_stm32.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY u5)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32U5 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32G4 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    #${TOP}/src/portable/st/typec/typec_stm32.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

hw/bsp/stm32u5/family.mk

@@ -20,11 +20,11 @@ SRC_C += \
 	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c
 
 INC += \