mirror of
https://github.com/hathach/tinyusb.git
synced 2025-03-14 13:21:13 +00:00
Add initial port for FT9xx series from Bridgetek.
Add FT90X and FT93X to the list of devices in tusb_option.h. 1700 for FT90x and 1701 for FT93x. Set endpoint attributes for FT90x and FT93x in dcd_attr.h. Add FT90x routines for USB device in src/portable/bridgetek/ft90x/dcd_ft90x.c The location for hardware header files and libraries is hw/mcu/bridgetek/ft90x/hardware. There are no files in the repository, but files will be linked as a submodule in the future. The required files can be copied from or linked to the location "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware" once the toolchain is installed. Makefile for the MM900EV1B board for developing with an FT900 device is present. Use "BOARD=mm900ev1b".
This commit is contained in:
Gordon McNab
parent
36dc25a22d
commit
62c613f6d2
56
hw/bsp/brtmm90x/boards/mm900ev1b/board.h
Normal file
56
hw/bsp/brtmm90x/boards/mm900ev1b/board.h
Normal file
@ -0,0 +1,56 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(__FT900__)
|
||||
#define GPIO_UART0_TX 48
|
||||
#define GPIO_UART0_RX 49
|
||||
#define GPIO_ETH_LED0 61
|
||||
#define GPIO_ETH_LED1 62
|
||||
#define GPIO_REMOTE_WAKEUP_PIN 18
|
||||
#define USBD_VBUS_DTC_PIN 3
|
||||
#elif defined(__FT930__)
|
||||
#define GPIO_UART0_TX 23
|
||||
#define GPIO_UART0_RX 22
|
||||
#define GPIO_ETH_LED0 4
|
||||
#define GPIO_ETH_LED1 5
|
||||
#define GPIO_REMOTE_WAKEUP_PIN 12
|
||||
#define USBD_VBUS_DTC_PIN 39
|
||||
#endif
|
||||
|
||||
//#define GPIO_REMOTE_WAKEUP
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
210
hw/bsp/brtmm90x/family.c
Normal file
210
hw/bsp/brtmm90x/family.c
Normal file
@ -0,0 +1,210 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright 2019 Sony Semiconductor Solutions Corporation
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include <registers/ft900_registers.h>
|
||||
#include <ft900.h>
|
||||
#include "bsp/board.h"
|
||||
#include "board.h"
|
||||
//#include "src/device/dcd.h"
|
||||
|
||||
#if TUSB_OPT_DEVICE_ENABLED
|
||||
int8_t board_ft90x_vbus(void); // Board specific implementation of VBUS detection for USB device.
|
||||
extern void ft90x_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management
|
||||
#endif
|
||||
|
||||
#ifdef GPIO_REMOTE_WAKEUP
|
||||
void gpio_ISR(void);
|
||||
#endif
|
||||
void timer_ISR(void);
|
||||
volatile unsigned int timer_ms = 0;
|
||||
void board_pm_ISR(void);
|
||||
|
||||
#define WELCOME_MSG "\x1B[2J\x1B[H" \
|
||||
"MM900EV1B board\r\n"
|
||||
|
||||
// Initialize on-board peripherals : led, button, uart and USB
|
||||
void board_init(void)
|
||||
{
|
||||
sys_reset_all();
|
||||
// Enable the UART Device.
|
||||
sys_enable(sys_device_uart0);
|
||||
// Set UART0 GPIO functions to UART0_TXD and UART0_RXD.
|
||||
gpio_function(GPIO_UART0_TX, pad_uart0_txd); /* UART0 TXD */
|
||||
gpio_function(GPIO_UART0_RX, pad_uart0_rxd); /* UART0 RXD */
|
||||
uart_open(UART0, /* Device */
|
||||
1, /* Prescaler = 1 */
|
||||
UART_DIVIDER_19200_BAUD, /* Divider = 1302 */
|
||||
uart_data_bits_8, /* No. Data Bits */
|
||||
uart_parity_none, /* Parity */
|
||||
uart_stop_bits_1); /* No. Stop Bits */
|
||||
// Print out a welcome message.
|
||||
// Use sizeof to avoid pulling in strlen unnecessarily.
|
||||
board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG));
|
||||
|
||||
#if 1
|
||||
gpio_function(GPIO_ETH_LED0, pad_gpio4); /* ETH LED0 */
|
||||
gpio_dir(GPIO_ETH_LED0, pad_dir_open_drain);
|
||||
gpio_function(GPIO_ETH_LED1, pad_gpio5); /* ETH LED0 */
|
||||
gpio_dir(GPIO_ETH_LED1, pad_dir_output);
|
||||
#endif
|
||||
sys_enable(sys_device_timer_wdt);
|
||||
interrupt_attach(interrupt_timers, (int8_t)interrupt_timers, timer_ISR);
|
||||
/* Timer A = 1ms */
|
||||
timer_prescaler(timer_select_a, 1000);
|
||||
timer_init(timer_select_a, 100, timer_direction_down, timer_prescaler_select_on, timer_mode_continuous);
|
||||
timer_enable_interrupt(timer_select_a);
|
||||
timer_start(timer_select_a);
|
||||
|
||||
// Setup VBUS detect GPIO. If the device is connected then this
|
||||
// will set the MASK_SYS_PMCFG_DEV_DETECT_EN bit in PMCFG.
|
||||
gpio_interrupt_disable(USBD_VBUS_DTC_PIN);
|
||||
gpio_function(USBD_VBUS_DTC_PIN, pad_vbus_dtc);
|
||||
gpio_pull(USBD_VBUS_DTC_PIN, pad_pull_pulldown);
|
||||
gpio_dir(USBD_VBUS_DTC_PIN, pad_dir_input);
|
||||
|
||||
interrupt_attach(interrupt_0, (int8_t)interrupt_0, board_pm_ISR);
|
||||
|
||||
#ifdef GPIO_REMOTE_WAKEUP
|
||||
//Configuring GPIO pin to wakeup.
|
||||
// Set up the wakeup pin.
|
||||
gpio_dir(GPIO_REMOTE_WAKEUP_PIN, pad_dir_input);
|
||||
gpio_pull(GPIO_REMOTE_WAKEUP_PIN, pad_pull_pullup);
|
||||
|
||||
// Attach an interrupt handler.
|
||||
interrupt_attach(interrupt_gpio, (uint8_t)interrupt_gpio, gpio_ISR);
|
||||
gpio_interrupt_enable(GPIO_REMOTE_WAKEUP_PIN, gpio_int_edge_falling);
|
||||
#endif
|
||||
|
||||
uart_disable_interrupt(UART0, uart_interrupt_tx);
|
||||
uart_disable_interrupt(UART0, uart_interrupt_rx);
|
||||
|
||||
// Enable all peripheral interrupts.
|
||||
interrupt_enable_globally();
|
||||
|
||||
TU_LOG1("MM900EV1B board setup complete\r\n");
|
||||
};
|
||||
|
||||
void timer_ISR(void)
|
||||
{
|
||||
if (timer_is_interrupted(timer_select_a))
|
||||
{
|
||||
timer_ms++;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef GPIO_REMOTE_WAKEUP
|
||||
void gpio_ISR(void)
|
||||
{
|
||||
if (gpio_is_interrupted(GPIO_REMOTE_WAKEUP_PIN))
|
||||
{
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Power management ISR */
|
||||
void board_pm_ISR(void)
|
||||
{
|
||||
uint16_t pmcfg = SYS->PMCFG_H;
|
||||
|
||||
#if defined(__FT930__)
|
||||
if (pmcfg & MASK_SYS_PMCFG_SLAVE_PERI_IRQ_PEND)
|
||||
{
|
||||
// Clear d2xx hw engine wakeup.
|
||||
SYS->PMCFG_H = MASK_SYS_PMCFG_SLAVE_PERI_IRQ_PEND;
|
||||
}
|
||||
#endif
|
||||
if (pmcfg & MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND)
|
||||
{
|
||||
// Clear GPIO wakeup pending.
|
||||
SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND;
|
||||
}
|
||||
|
||||
#if defined(__FT900__)
|
||||
// USB device power management interrupts.
|
||||
if (pmcfg & (MASK_SYS_PMCFG_DEV_CONN_DEV |
|
||||
MASK_SYS_PMCFG_DEV_DIS_DEV |
|
||||
MASK_SYS_PMCFG_HOST_RST_DEV |
|
||||
MASK_SYS_PMCFG_HOST_RESUME_DEV)
|
||||
)
|
||||
{
|
||||
#if TUSB_OPT_DEVICE_ENABLED
|
||||
ft90x_usbd_pm_ISR(pmcfg);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
#if TUSB_OPT_DEVICE_ENABLED
|
||||
int8_t board_ft90x_vbus(void)
|
||||
{
|
||||
return gpio_read(USBD_VBUS_DTC_PIN);
|
||||
}
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
// Turn LED on or off
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
gpio_write(GPIO_ETH_LED0, state);
|
||||
}
|
||||
|
||||
// Get the current state of button
|
||||
// a '1' means active (pressed), a '0' means inactive.
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
// Get characters from UART
|
||||
int board_uart_read(uint8_t *buf, int len)
|
||||
{
|
||||
int r = uart_readn(UART0, (uint8_t *)buf, len);
|
||||
|
||||
return r;
|
||||
}
|
||||
|
||||
// Send characters to UART
|
||||
int board_uart_write(void const *buf, int len)
|
||||
{
|
||||
int r = uart_writen(UART0, (uint8_t *)buf, len);
|
||||
|
||||
return r;
|
||||
}
|
||||
|
||||
// Get current milliseconds
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
uint32_t safe_ms;
|
||||
|
||||
CRITICAL_SECTION_BEGIN
|
||||
safe_ms = timer_ms;
|
||||
CRITICAL_SECTION_END
|
||||
|
||||
return safe_ms;
|
||||
}
|
||||
35
hw/bsp/brtmm90x/family.mk
Normal file
35
hw/bsp/brtmm90x/family.mk
Normal file
@ -0,0 +1,35 @@
|
||||
|
||||
CROSS_COMPILE = ft32-elf-
|
||||
DEPS_SUBMODULES += hw/mcu/bridgetek/ft90x/hardware
|
||||
SKIP_NANOLIB = 1
|
||||
|
||||
# This is installed at "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware"
|
||||
FT90X_SDK = $(TOP)/hw/mcu/bridgetek/ft90x/hardware
|
||||
|
||||
CFLAGS += \
|
||||
-D__FT900__ \
|
||||
-fvar-tracking \
|
||||
-fvar-tracking-assignments \
|
||||
-fmessage-length=0 \
|
||||
-ffunction-sections \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_FT90X
|
||||
|
||||
# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration
|
||||
CFLAGS += -Wno-error=shadow
|
||||
CFLAGS:=$(filter-out -Wcast-function-type,$(CFLAGS))
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LDINC += $(FT90X_SDK)/lib/Release
|
||||
LIBS += -lft900
|
||||
LD_FILE = hw/mcu/bridgetek/ft90x/hardware/scripts/ldscript.ld
|
||||
LDFLAGS += $(addprefix -L,$(LDINC)) \
|
||||
-Xlinker --entry=_start \
|
||||
-Wl,-lc
|
||||
|
||||
SRC_C += src/portable/bridgetek/ft90x/dcd_ft90x.c
|
||||
|
||||
#SRC_S += hw/mcu/bridgetek/ft90x/hardware/scripts/crt0.S
|
||||
|
||||
INC += \
|
||||
$(FT90X_SDK)/include \
|
||||
$(TOP)/$(BOARD_PATH)
|
||||
6
hw/mcu/bridgetek/ft90x/Readme.md
Normal file
6
hw/mcu/bridgetek/ft90x/Readme.md
Normal file
@ -0,0 +1,6 @@
|
||||
# BridgeTek FT9xx MCU
|
||||
|
||||
**BridgeTek** provides a hardware abstraction library with software source code for the SDKs for FT9xx software family.
|
||||
The pre-built libraries and the source code can be redistributed.
|
||||
Registers definition files `<sdk>/include/registers/ft900_registers.h` and included peripheral register definition files have licenses that allow for redistribution.
|
||||
Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`
|
||||
286
hw/mcu/bridgetek/ft90x/hardware/scripts/crt0.S
Normal file
286
hw/mcu/bridgetek/ft90x/hardware/scripts/crt0.S
Normal file
@ -0,0 +1,286 @@
|
||||
.equ SYS_REGMSC0CFG_B3 , 0x1001b
|
||||
.equ SYS_REGIRQCTL_B3 , 0x100e3
|
||||
.equ MAILBOX_MEMORY , 0x13000
|
||||
|
||||
.equ IS_IMG_SDBL_PRESENT, 0
|
||||
.equ IS_IMG_D2XX_PRESENT, 0
|
||||
.equ IS_IMG_DLOG_PRESENT, 0
|
||||
|
||||
.section .crt0
|
||||
.global _start
|
||||
|
||||
_start:
|
||||
# START Interrupt Vector Table [[
|
||||
jmp __PMSIZE-4 # RESET Vector
|
||||
jmp interrupt_33 # Watchdog reset vector
|
||||
jmp interrupt_0
|
||||
jmp interrupt_1
|
||||
jmp interrupt_2
|
||||
jmp interrupt_3
|
||||
jmp interrupt_4
|
||||
jmp interrupt_5
|
||||
jmp interrupt_6
|
||||
jmp interrupt_7
|
||||
jmp interrupt_8
|
||||
jmp interrupt_9
|
||||
jmp interrupt_10
|
||||
jmp interrupt_11
|
||||
jmp interrupt_12
|
||||
jmp interrupt_13
|
||||
jmp interrupt_14
|
||||
jmp interrupt_15
|
||||
jmp interrupt_16
|
||||
jmp interrupt_17
|
||||
jmp interrupt_18
|
||||
jmp interrupt_19
|
||||
jmp interrupt_20
|
||||
jmp interrupt_21
|
||||
jmp interrupt_22
|
||||
jmp interrupt_23
|
||||
jmp interrupt_24
|
||||
jmp interrupt_25
|
||||
jmp interrupt_26
|
||||
jmp interrupt_27
|
||||
jmp interrupt_28
|
||||
jmp interrupt_29
|
||||
jmp interrupt_30
|
||||
jmp interrupt_31
|
||||
jmp __PMSIZE-8 #Interrupt vector 32 (NMI)
|
||||
# ]] END Interrupt Vector Table
|
||||
|
||||
codestart:
|
||||
jmp init
|
||||
|
||||
.global _exithook
|
||||
_exithook: # Debugger uses '_exithook' at 0x90 to catch program exit
|
||||
return
|
||||
|
||||
init:
|
||||
# Disable all interrupts
|
||||
ldk $r0,0x80
|
||||
.ifdef __FT930__
|
||||
sta.b 0x10123, $r0
|
||||
.else
|
||||
sta.b 0x100e3,$r0
|
||||
.endif
|
||||
|
||||
# Reset all peripherals
|
||||
# lda.l $r0, 0x10018
|
||||
# bins.l $r0, $r0, 0x23F # Set bit 31
|
||||
# sta.l 0x10018, $r0
|
||||
|
||||
# Initialize DATA by copying from program memory
|
||||
ldk.l $r0,__data_load_start
|
||||
ldk.l $r1,__data_load_end
|
||||
ldk.l $r2,0 # Will use __data after binutils patch
|
||||
|
||||
jmp .dscopy
|
||||
.dsloop:
|
||||
# Copy PM[$r0] to RAM $r2
|
||||
lpmi.l $r3,$r0,0
|
||||
sti.l $r2,0,$r3
|
||||
add.l $r0,$r0,4
|
||||
add.l $r2,$r2,4
|
||||
.dscopy:
|
||||
cmp.l $r0,$r1
|
||||
jmpc lt,.dsloop
|
||||
|
||||
# Zero BSS
|
||||
ldk.l $r0,_bss_start
|
||||
ldk.l $r2,_end
|
||||
sub.l $r2,$r2,$r0
|
||||
ldk.l $r1,0
|
||||
ldk $r3,32764
|
||||
1:
|
||||
cmp $r2,$r3
|
||||
jmpc lt,2f
|
||||
memset $r0,$r1,$r3
|
||||
add $r0,$r0,$r3
|
||||
sub $r2,$r2,$r3
|
||||
jmp 1b
|
||||
2:
|
||||
memset $r0,$r1,$r2
|
||||
.ifdef __FT930__
|
||||
/*##############################################################*/
|
||||
# copy UserConfig DATA from flash to mailbox memory
|
||||
/*##############################################################*/
|
||||
ldk.l $r0,D2XX_Struct_start /*start of d2xx config in PM memory */
|
||||
ldk.l $r1,D2XX_Struct_end /*end of d2xx config in PM memory */
|
||||
ldk.l $r2,D2XXTEST_UserD2xxConfig /* RAM cache where the d2xx config from PM to be copied*/
|
||||
jmp .configcopy
|
||||
|
||||
.configloop:
|
||||
# Copy PM[$r0] to RAM[$r2]
|
||||
lpmi.l $r3,$r0,0
|
||||
sti.l $r2,0,$r3
|
||||
# Increment
|
||||
add.l $r0,$r0,4
|
||||
add.l $r2,$r2,4
|
||||
.configcopy:
|
||||
cmp.l $r0,$r1
|
||||
jmpc lt,.configloop
|
||||
|
||||
ldk.l $r1,D2XX_Struct_start
|
||||
ldk.l $r2,D2XX_Struct_end
|
||||
#compute size
|
||||
sub.l $r2,$r2,$r1
|
||||
ldk.l $r1,D2XXTEST_UserD2xxConfig
|
||||
ldk.l $r0,MAILBOX_MEMORY /* D2xx config from RAM cache to be copied to Mailbox memory */
|
||||
# Copy RAM[$r1] to Mailbox $r0, for $r2 bytes
|
||||
streamouti.b $r0,$r1,$r2
|
||||
/*############################################################*/
|
||||
.endif
|
||||
sub.l $sp,$sp,24 # Space for the caller argument frame
|
||||
call main
|
||||
|
||||
.equ EXITEXIT , 0x1fffc
|
||||
|
||||
.global _exit
|
||||
_exit:
|
||||
sta.l EXITEXIT,$r0 # simulator end of test
|
||||
jmp _exithook
|
||||
|
||||
#_watchdog_isr:
|
||||
# ldk $sp,__RAMSIZE
|
||||
# jmp __PMSIZE-4
|
||||
|
||||
# Macro to construct the interrupt stub code.
|
||||
# it just saves r0, loads r0 with the int vector
|
||||
# and branches to interrupt_common.
|
||||
|
||||
.macro inth i=0
|
||||
interrupt_\i:
|
||||
push $r0 # {
|
||||
lda $r0,(vector_table + 4 * \i)
|
||||
jmp interrupt_common
|
||||
.endm
|
||||
|
||||
inth 0
|
||||
inth 1
|
||||
inth 2
|
||||
inth 3
|
||||
inth 4
|
||||
inth 5
|
||||
inth 6
|
||||
inth 7
|
||||
inth 8
|
||||
inth 9
|
||||
inth 10
|
||||
inth 11
|
||||
inth 12
|
||||
inth 13
|
||||
inth 14
|
||||
inth 15
|
||||
inth 16
|
||||
inth 17
|
||||
inth 18
|
||||
inth 19
|
||||
inth 20
|
||||
inth 21
|
||||
inth 22
|
||||
inth 23
|
||||
inth 24
|
||||
inth 25
|
||||
inth 26
|
||||
inth 27
|
||||
inth 28
|
||||
inth 29
|
||||
inth 30
|
||||
inth 31
|
||||
inth 32
|
||||
inth 33
|
||||
|
||||
# On entry: r0, already saved, holds the handler function
|
||||
interrupt_common:
|
||||
push $r1 # {
|
||||
push $r2 # {
|
||||
push $r3 # {
|
||||
push $r4 # {
|
||||
push $r5 # {
|
||||
push $r6 # {
|
||||
push $r7 # {
|
||||
push $r8 # {
|
||||
push $r9 # {
|
||||
push $r10 # {
|
||||
push $r11 # {
|
||||
push $r12 # {
|
||||
push $cc # {
|
||||
|
||||
calli $r0
|
||||
|
||||
pop $cc # }
|
||||
pop $r12 # }
|
||||
pop $r11 # }
|
||||
pop $r10 # }
|
||||
pop $r9 # }
|
||||
pop $r8 # }
|
||||
pop $r7 # }
|
||||
pop $r6 # }
|
||||
pop $r5 # }
|
||||
pop $r4 # }
|
||||
pop $r3 # }
|
||||
pop $r2 # }
|
||||
pop $r1 # }
|
||||
pop $r0 # } matching push in interrupt_0-31 above
|
||||
reti
|
||||
|
||||
# Null function for unassigned interrupt to point at
|
||||
.global nullvector
|
||||
nullvector:
|
||||
return
|
||||
|
||||
.section .data
|
||||
.global vector_table
|
||||
.align (4) # assembler alignment is in the power of 2 (in this case 2^4)
|
||||
vector_table:
|
||||
.rept 34
|
||||
.long nullvector
|
||||
.endr
|
||||
|
||||
|
||||
.section .text
|
||||
.global __gxx_personality_sj0
|
||||
__gxx_personality_sj0:
|
||||
|
||||
|
||||
.section ._flash_d2xx_config
|
||||
.global __pD2XXDefaultConfiguration
|
||||
.align (10)
|
||||
|
||||
D2XX_partition_start = .
|
||||
|
||||
.if IS_IMG_D2XX_PRESENT
|
||||
.ifdef __FT930__
|
||||
.include "ft930_d2xx_default_config.inc"
|
||||
.else
|
||||
.include "ft900_d2xx_default_config.inc"
|
||||
.endif
|
||||
.endif
|
||||
|
||||
D2XX_partition_end = .
|
||||
|
||||
.section ._flash_dlog_partition
|
||||
.align (10)
|
||||
.global __dlog_partition
|
||||
__dlog_partition:
|
||||
dlog_partition_start = .
|
||||
.if IS_IMG_DLOG_PRESENT
|
||||
.long 0xF7D1D106
|
||||
.rept (0x1000-4)
|
||||
.byte 0xFF
|
||||
.endr
|
||||
.endif
|
||||
dlog_partition_end = .
|
||||
|
||||
.section ._pm
|
||||
.global __sdbl_partition_sizeof
|
||||
.global __D2XX_partition_sizeof
|
||||
.global __dlog_partition_sizeof
|
||||
.if IS_IMG_SDBL_PRESENT
|
||||
__sdbl_partition_sizeof = 0x2000
|
||||
.else
|
||||
__sdbl_partition_sizeof = 0
|
||||
.endif
|
||||
|
||||
__D2XX_partition_sizeof = D2XX_partition_end - D2XX_partition_start
|
||||
__dlog_partition_sizeof = dlog_partition_end - dlog_partition_start
|
||||
94
hw/mcu/bridgetek/ft90x/hardware/scripts/ldscript.ld
Normal file
94
hw/mcu/bridgetek/ft90x/hardware/scripts/ldscript.ld
Normal file
@ -0,0 +1,94 @@
|
||||
/* Default linker script, for normal executables */
|
||||
OUTPUT_FORMAT("elf32-ft32")
|
||||
OUTPUT_ARCH(ft32)
|
||||
SEARCH_DIR("/data/win8/ft32/ft32-elf/lib");
|
||||
/* Allow the command line to override the memory region sizes. */
|
||||
__PMSIZE = DEFINED(__PMSIZE) ? __PMSIZE : 256K;
|
||||
__RAMSIZE = DEFINED(__RAMSIZE) ? __RAMSIZE : 64K;
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0, LENGTH = __PMSIZE
|
||||
ram (rw!x) : ORIGIN = 0x800000, LENGTH = __RAMSIZE
|
||||
}
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
*(.text*)
|
||||
*(.strings)
|
||||
*(._pm*)
|
||||
*(.init)
|
||||
*(.fini)
|
||||
_etext = . ;
|
||||
. = ALIGN(4);
|
||||
} > flash
|
||||
.tors :
|
||||
{
|
||||
___ctors = . ;
|
||||
*(.ctors)
|
||||
___ctors_end = . ;
|
||||
___dtors = . ;
|
||||
*(.dtors)
|
||||
___dtors_end = . ;
|
||||
. = ALIGN(4);
|
||||
} > ram
|
||||
.data : AT (ADDR (.text) + SIZEOF (.text))
|
||||
{
|
||||
*(.data)
|
||||
*(.data*)
|
||||
*(.rodata)
|
||||
*(.rodata*)
|
||||
_edata = . ;
|
||||
. = ALIGN(4);
|
||||
} > ram
|
||||
.bss SIZEOF(.data) + ADDR(.data) :
|
||||
{
|
||||
_bss_start = . ;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
_end = . ;
|
||||
. = ALIGN(4);
|
||||
} > ram
|
||||
__data_load_start = LOADADDR(.data);
|
||||
__data_load_end = __data_load_start + SIZEOF(.data);
|
||||
.stab 0 (NOLOAD) :
|
||||
{
|
||||
*(.stab)
|
||||
}
|
||||
.stabstr 0 (NOLOAD) :
|
||||
{
|
||||
*(.stabstr)
|
||||
}
|
||||
/* DWARF debug sections.
|
||||
Symbols in the DWARF debugging sections are relative to the beginning
|
||||
of the section so we begin them at 0. */
|
||||
/* DWARF 1 */
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
/* GNU DWARF 1 extensions */
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
/* DWARF 2 */
|
||||
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
/* SGI/MIPS DWARF 2 extensions */
|
||||
.debug_weaknames 0 : { *(.debug_weaknames) }
|
||||
.debug_funcnames 0 : { *(.debug_funcnames) }
|
||||
.debug_typenames 0 : { *(.debug_typenames) }
|
||||
.debug_varnames 0 : { *(.debug_varnames) }
|
||||
/* DWARF 3 */
|
||||
.debug_pubtypes 0 : { *(.debug_pubtypes) }
|
||||
.debug_ranges 0 : { *(.debug_ranges) }
|
||||
/* DWARF Extension. */
|
||||
.debug_macro 0 : { *(.debug_macro) }
|
||||
.debug_addr 0 : { *(.debug_addr) }
|
||||
}
|
||||
@ -151,6 +151,13 @@
|
||||
#elif TU_CHECK_MCU(GD32VF103)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 4
|
||||
|
||||
//------------- BridgeTek -------------//
|
||||
#elif TU_CHECK_MCU(FT90X)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
#elif TU_CHECK_MCU(FT93X)
|
||||
#define DCD_ATTR_ENDPOINT_MAX 16
|
||||
|
||||
#else
|
||||
#warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
|
||||
#define DCD_ATTR_ENDPOINT_MAX 8
|
||||
|
||||
1101
src/portable/bridgetek/ft90x/dcd_ft90x.c
Normal file
1101
src/portable/bridgetek/ft90x/dcd_ft90x.c
Normal file
File diff suppressed because it is too large
Load Diff
@ -126,6 +126,10 @@
|
||||
// GigaDevice
|
||||
#define OPT_MCU_GD32VF103 1600 ///< GigaDevice GD32VF103
|
||||
|
||||
// BridgeTek
|
||||
#define OPT_MCU_FT90X 1700 ///< BridgeTek FT90x
|
||||
#define OPT_MCU_FT93X 1701 ///< BridgeTek FT93x
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Supported OS
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user