mirror of
https://github.com/hathach/tinyusb.git
synced 2025-02-22 06:40:58 +00:00
ADDING LPC176X device
implementing dcd_lpc175x_6x.c add usbd_dcd.h add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0) --> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor). uncomment write zero length will cause issue, no more interrupt ?
This commit is contained in:
hathach
parent
e3bb5e9f2f
commit
503d279af5
@ -82,7 +82,7 @@
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="bsp/boards/embedded_artists/oem_base_board|bsp/lpc175x_6x|bsp/lpc11uxx|bsp/lpc43xx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
<entry excluding="bsp/lpc175x_6x|bsp/boards/embedded_artists/oem_base_board|bsp/lpc11uxx|bsp/lpc43xx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
@ -170,7 +170,7 @@
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="bsp/boards/embedded_artists/oem_base_board|bsp/lpc175x_6x|bsp/lpc43xx|bsp/lpc13uxx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
<entry excluding="bsp/lpc175x_6x|bsp/boards/embedded_artists/oem_base_board|bsp/lpc43xx|bsp/lpc13uxx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
@ -260,7 +260,7 @@
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_can.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/sdio.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/LCDTerm.c|bsp/lpc175x_6x|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_evrt.c|bsp/lpc11uxx|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_gpdma.c|bsp/lpc13uxx|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_lcd.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_ssp.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rit.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_qei.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_mcpwm.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_wwdt.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_atimer.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_i2s.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/debug_frmwrk.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_emc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_sct.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rtc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_dac.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/Font5x7.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_timer.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_adc.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
<entry excluding="bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_can.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/sdio.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/LCDTerm.c|bsp/lpc175x_6x|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_evrt.c|bsp/lpc11uxx|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_gpdma.c|bsp/lpc13uxx|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_lcd.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_ssp.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rit.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_qei.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_atimer.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_wwdt.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_mcpwm.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/debug_frmwrk.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_i2s.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_emc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_sct.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_rtc.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_dac.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/Font5x7.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_timer.c|bsp/lpc43xx/CMSISv2p10_LPC43xx_DriverLib/src/lpc43xx_adc.c" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
@ -349,7 +349,7 @@
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_iap.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_wdt.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_timer.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2s.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2c.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_mcpwm.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_libcfg_default.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_gpdma.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_exti.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_emac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_dac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_clkpwr.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_can.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_adc.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/debug_frmwrk.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_ssp.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_spi.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rtc.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rit.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_qei.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_pwm.c|bsp/boards/embedded_artists/oem_base_board|bsp/lpc11uxx|bsp/lpc43xx|bsp/lpc13uxx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
<entry excluding="bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_pwm.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_libcfg_default.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_timer.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_clkpwr.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_exti.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2s.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_iap.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_spi.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rit.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2c.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_gpdma.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_qei.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_ssp.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_emac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_mcpwm.c|bsp/boards/embedded_artists/oem_base_board|bsp/lpc11uxx|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rtc.c|bsp/lpc13uxx|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_wdt.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_adc.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/debug_frmwrk.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_dac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_can.c|bsp/lpc43xx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
|
||||
@ -81,14 +81,16 @@
|
||||
//--------------------------------------------------------------------+
|
||||
// DEVICE CONFIGURATION
|
||||
//--------------------------------------------------------------------+
|
||||
#define TUSB_CFG_DEVICE_USE_ROM_DRIVER 1
|
||||
|
||||
//------------- descriptors -------------//
|
||||
#define TUSB_CFG_DEVICE_STRING_MANUFACTURER "tinyusb.org"
|
||||
#define TUSB_CFG_DEVICE_STRING_PRODUCT "Device Example"
|
||||
#define TUSB_CFG_DEVICE_STRING_SERIAL "1234"
|
||||
#define TUSB_CFG_DEVICE_VENDORID 0x1FC9 // NXP
|
||||
//#define TUSB_CFG_DEVICE_PRODUCTID 0x4567
|
||||
|
||||
|
||||
#define TUSB_CFG_DEVICE_USE_ROM_DRIVER 1
|
||||
#define TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE 64
|
||||
|
||||
//------------- CLASS -------------//
|
||||
#define TUSB_CFG_DEVICE_HID_KEYBOARD 0
|
||||
|
||||
@ -129,7 +129,7 @@ tusb_descriptor_device_t app_tusb_desc_device =
|
||||
.bDeviceSubClass = 0x00,
|
||||
.bDeviceProtocol = 0x00,
|
||||
|
||||
.bMaxPacketSize0 = USB_MAX_PACKET0,
|
||||
.bMaxPacketSize0 = TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE,
|
||||
|
||||
.idVendor = TUSB_CFG_DEVICE_VENDORID,
|
||||
.idProduct = TUSB_CFG_PRODUCT_ID,
|
||||
|
||||
@ -70,9 +70,9 @@
|
||||
|
||||
#if defined(__GNUC__) && !defined(__CC_ARM)
|
||||
|
||||
#define BIN8(x) (0b##x)
|
||||
#define BIN16(b1, b2) (0b##b1##b2)
|
||||
#define BIN32(b1, b2, b3, b4) (0b##b1##b2##b3##b4)
|
||||
#define BIN8(x) ((uint8_t) (0b##x))
|
||||
#define BIN16(b1, b2) ((uint16_t) (0b##b1##b2))
|
||||
#define BIN32(b1, b2, b3, b4) ((uint32_t) (0b##b1##b2##b3##b4))
|
||||
|
||||
#else
|
||||
|
||||
|
||||
@ -194,7 +194,10 @@ typedef enum {
|
||||
TUSB_EVENT_XFER_COMPLETE,
|
||||
TUSB_EVENT_XFER_ERROR,
|
||||
TUSB_EVENT_INTERFACE_OPEN,
|
||||
TUSB_EVENT_INTERFACE_CLOSE
|
||||
TUSB_EVENT_INTERFACE_CLOSE,
|
||||
|
||||
TUSB_EVENT_BUS_RESET, // TODO refractor
|
||||
TUSB_EVENT_SETUP_RECEIVED,
|
||||
}tusb_event_t;
|
||||
|
||||
enum {
|
||||
|
||||
@ -62,6 +62,10 @@ tusb_error_t dcd_controller_reset(uint8_t coreid) ATTR_WARN_UNUSED_RESULT;
|
||||
void dcd_controller_connect(uint8_t coreid);
|
||||
void dcd_isr(uint8_t coreid);
|
||||
|
||||
void dcd_pipe_control_write_zero_length(uint8_t coreid);
|
||||
tusb_error_t dcd_endpoint_configure(uint8_t coreid, tusb_descriptor_endpoint_t const * p_endpoint_desc) ATTR_WARN_UNUSED_RESULT;
|
||||
void dcd_device_set_address(uint8_t coreid, uint8_t dev_addr);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -47,6 +47,7 @@
|
||||
//--------------------------------------------------------------------+
|
||||
#include "dcd.h"
|
||||
#include "dcd_lpc175x_6x.h"
|
||||
#include "usbd_dcd.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO CONSTANT TYPEDEF
|
||||
@ -56,22 +57,192 @@ STATIC_ dcd_dma_descriptor_t* dcd_udca[32] ATTR_ALIGNED(128) TUSB_CFG_ATTR_USBRA
|
||||
//--------------------------------------------------------------------+
|
||||
// INTERNAL OBJECT & FUNCTION DECLARATION
|
||||
//--------------------------------------------------------------------+
|
||||
static inline void endpoint_set_max_packet_size(uint8_t endpoint_idx, uint16_t max_packet_size) ATTR_ALWAYS_INLINE;
|
||||
static inline void endpoint_set_max_packet_size(uint8_t endpoint_idx, uint16_t max_packet_size)
|
||||
{
|
||||
LPC_USB->USBEpInd = endpoint_idx; // select index before setting packet size
|
||||
LPC_USB->USBMaxPSize = max_packet_size;
|
||||
}
|
||||
|
||||
static inline void sie_commamd_code (uint8_t phase, uint8_t code_data) ATTR_ALWAYS_INLINE;
|
||||
static inline void sie_commamd_code (uint8_t phase, uint8_t code_data)
|
||||
{
|
||||
LPC_USB->USBDevIntClr = (DEV_INT_COMMAND_CODE_EMPTY_MASK | DEV_INT_COMMAND_DATA_FULL_MASK);
|
||||
LPC_USB->USBCmdCode = (phase << 8) | (code_data << 16);
|
||||
|
||||
uint32_t const wait_flag = (phase == SIE_CMDPHASE_READ) ? DEV_INT_COMMAND_DATA_FULL_MASK : DEV_INT_COMMAND_CODE_EMPTY_MASK;
|
||||
while ((LPC_USB->USBDevIntSt & wait_flag) == 0); // TODO blocking forever potential
|
||||
LPC_USB->USBDevIntClr = wait_flag;
|
||||
}
|
||||
|
||||
static inline void sie_command_write (uint8_t cmd_code, uint8_t data_len, uint8_t data) ATTR_ALWAYS_INLINE;
|
||||
static inline void sie_command_write (uint8_t cmd_code, uint8_t data_len, uint8_t data)
|
||||
{
|
||||
sie_commamd_code(SIE_CMDPHASE_COMMAND, cmd_code);
|
||||
|
||||
if (data_len)
|
||||
{
|
||||
sie_commamd_code(SIE_CMDPHASE_WRITE, data);
|
||||
}
|
||||
}
|
||||
|
||||
static inline uint32_t sie_command_read (uint8_t cmd_code, uint8_t data_len) ATTR_ALWAYS_INLINE;
|
||||
static inline uint32_t sie_command_read (uint8_t cmd_code, uint8_t data_len)
|
||||
{
|
||||
// TODO multiple read
|
||||
sie_commamd_code(SIE_CMDPHASE_READ, cmd_code);
|
||||
return LPC_USB->USBCmdData;
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// IMPLEMENTATION
|
||||
//--------------------------------------------------------------------+
|
||||
void endpoint_control_isr(uint8_t coreid)
|
||||
{
|
||||
(void) coreid; // suppress compiler warning
|
||||
uint32_t const endpoint_int_status = LPC_USB->USBEpIntSt & LPC_USB->USBEpIntEn;
|
||||
|
||||
// control OUT
|
||||
if (endpoint_int_status & BIT_(0))
|
||||
{
|
||||
uint32_t const endpoint_status = sie_command_read(SIE_CMDCODE_ENDPOINT_SELECT+0, 1);
|
||||
if (endpoint_status & SIE_ENDPOINT_STATUS_SETUP_RECEIVED_MASK)
|
||||
{
|
||||
(void) sie_command_read(SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT+0, 1); // clear setup bit
|
||||
|
||||
// read endpoint
|
||||
LPC_USB->USBCtrl = SLAVE_CONTROL_READ_ENABLE_MASK; // logical endpoint = 0
|
||||
while ((LPC_USB->USBRxPLen & SLAVE_RXPLEN_PACKET_READY_MASK) == 0) {}
|
||||
|
||||
ASSERT_INT(8, LPC_USB->USBRxPLen & SLAVE_RXPLEN_PACKET_LENGTH_MASK, (void) 0);
|
||||
|
||||
uint32_t *p_setup = (uint32_t*) &usbd_devices[0].setup_packet;
|
||||
*p_setup = LPC_USB->USBRxData;
|
||||
p_setup += 4;
|
||||
*p_setup = LPC_USB->USBRxData;
|
||||
// TODO setup received callback
|
||||
usbd_isr(0, TUSB_EVENT_SETUP_RECEIVED);
|
||||
}else
|
||||
{
|
||||
// ASSERT(false, (void) 0); // not current supported
|
||||
}
|
||||
|
||||
sie_command_write(SIE_CMDCODE_BUFFER_CLEAR, 0, 0);
|
||||
}
|
||||
|
||||
// control IN
|
||||
if (endpoint_int_status & BIT_(1))
|
||||
{
|
||||
|
||||
}
|
||||
|
||||
LPC_USB->USBEpIntClr = endpoint_int_status; // acknowledge interrupt
|
||||
}
|
||||
|
||||
void dcd_isr(uint8_t coreid)
|
||||
{
|
||||
uint32_t device_int_status = LPC_USB->USBDevIntSt & LPC_USB->USBDevIntEn & DEV_INT_ALL_MASK;
|
||||
LPC_USB->USBDevIntClr = device_int_status;// Acknowledge handled interrupt
|
||||
|
||||
//------------- usb bus event -------------//
|
||||
if (device_int_status & DEV_INT_DEVICE_STATUS_MASK)
|
||||
{
|
||||
uint32_t dev_status_reg = sie_command_read(SIE_CMDCODE_DEVICE_STATUS, 1);
|
||||
if (dev_status_reg & SIE_DEV_STATUS_RESET_MASK)
|
||||
{
|
||||
usbd_isr(coreid, TUSB_EVENT_BUS_RESET);
|
||||
}
|
||||
|
||||
// TODO invoke some callbacks
|
||||
if (dev_status_reg & SIE_DEV_STATUS_CONNECT_CHANGE_MASK)
|
||||
{
|
||||
|
||||
}
|
||||
if (dev_status_reg & SIE_DEV_STATUS_SUSPEND_CHANGE_MASK)
|
||||
{
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
//------------- slave mode, control endpoint -------------//
|
||||
if (device_int_status & DEV_INT_ENDPOINT_SLOW_MASK)
|
||||
{
|
||||
// only occur on control endpoint, all other use DMA
|
||||
endpoint_control_isr(coreid);
|
||||
}
|
||||
|
||||
if (device_int_status & DEV_INT_ERROR_MASK)
|
||||
{
|
||||
ASSERT(false, (void) 0);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// USBD-DCD API
|
||||
//--------------------------------------------------------------------+
|
||||
tusb_error_t dcd_init(void)
|
||||
{
|
||||
//------------- user manual 11.13 usb device controller initialization -------------// LPC_USB->USBEpInd = 0;
|
||||
// step 6 : set up control endpoint
|
||||
endpoint_set_max_packet_size(0, TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE);
|
||||
endpoint_set_max_packet_size(1, TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE);
|
||||
while ((LPC_USB->USBDevIntSt & DEV_INT_ENDPOINT_REALIZED_MASK) == 0);
|
||||
|
||||
// step 7 : slave mode set up
|
||||
LPC_USB->USBEpIntEn = (uint32_t) BIN8(11); // control endpoint cannot use DMA, non-control all use DMA
|
||||
|
||||
LPC_USB->USBDevIntEn = (DEV_INT_DEVICE_STATUS_MASK | DEV_INT_ENDPOINT_SLOW_MASK | DEV_INT_ERROR_MASK);
|
||||
LPC_USB->USBDevIntClr = 0xFFFFFFFF; // clear all pending interrupt
|
||||
|
||||
LPC_USB->USBEpIntClr = 0xFFFFFFFF; // clear all pending interrupt
|
||||
LPC_USB->USBEpIntPri = 0; // same priority for all endpoint
|
||||
|
||||
// step 8 : DMA set up
|
||||
LPC_USB->USBEpDMADis = 0xFFFFFFFF; // firstly disable all dma
|
||||
LPC_USB->USBDMARClr = 0xFFFFFFFF; // clear all pending interrupt
|
||||
LPC_USB->USBEoTIntClr = 0xFFFFFFFF;
|
||||
LPC_USB->USBNDDRIntClr = 0xFFFFFFFF;
|
||||
LPC_USB->USBSysErrIntClr = 0xFFFFFFFF;
|
||||
|
||||
for (uint8_t index = 0; index < DCD_MAX_DD; index++)
|
||||
{
|
||||
dcd_udca[index] = 0;
|
||||
}
|
||||
LPC_USB->USBUDCAH = (uint32_t) dcd_udca;
|
||||
LPC_USB->USBDMAIntEn = (DMA_INT_END_OF_XFER_MASK | DMA_INT_NEW_DD_REQUEST_MASK | DMA_INT_ERROR_MASK );
|
||||
|
||||
// clear all stall on control endpoint IN & OUT if any
|
||||
sie_command_write(SIE_CMDCODE_ENDPOINT_SET_STATUS , 0, 0);
|
||||
sie_command_write(SIE_CMDCODE_ENDPOINT_SET_STATUS + 1, 0, 0);
|
||||
|
||||
return TUSB_ERROR_NONE;
|
||||
}
|
||||
|
||||
tusb_error_t dcd_endpoint_configure(uint8_t coreid, tusb_descriptor_endpoint_t const * p_endpoint_desc)
|
||||
{
|
||||
return TUSB_ERROR_NONE;
|
||||
}
|
||||
|
||||
void dcd_controller_connect(uint8_t coreid)
|
||||
{
|
||||
|
||||
sie_command_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1);
|
||||
}
|
||||
|
||||
void dcd_device_set_address(uint8_t coreid, uint8_t dev_addr)
|
||||
{
|
||||
sie_command_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable
|
||||
}
|
||||
|
||||
void dcd_pipe_control_write_zero_length(uint8_t coreid)
|
||||
{
|
||||
LPC_USB->USBCtrl = SLAVE_CONTROL_WRITE_ENABLE_MASK; // logical endpoint = 0
|
||||
LPC_USB->USBTxPLen = 0;
|
||||
|
||||
LPC_USB->USBCtrl = 0;
|
||||
|
||||
sie_command_write(SIE_CMDCODE_ENDPOINT_SELECT+1, 0, 0); // select control IN endpoint
|
||||
sie_command_write(SIE_CMDCODE_BUFFER_VALIDATE, 0, 0);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
@ -83,12 +83,111 @@ typedef struct
|
||||
// uint32_t iso_packet_size_addr; // iso only, can be omitted for non-iso
|
||||
} ATTR_ALIGNED(4) dcd_dma_descriptor_t;
|
||||
|
||||
#define DCD_DD_NUM 10 // TODO scale with configure
|
||||
#define DCD_MAX_DD 10 // TODO scale with configure
|
||||
typedef struct {
|
||||
dcd_dma_descriptor_t dd[DCD_DD_NUM];
|
||||
dcd_dma_descriptor_t dd[DCD_MAX_DD];
|
||||
|
||||
}dcd_data_t;
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Register Interface
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
//------------- USB Interrupt USBIntSt -------------//
|
||||
//enum {
|
||||
// DCD_USB_REQ_LOW_PRIO_MASK = BIT_(0),
|
||||
// DCD_USB_REQ_HIGH_PRIO_MASK = BIT_(1),
|
||||
// DCD_USB_REQ_DMA_MASK = BIT_(2),
|
||||
// DCD_USB_REQ_NEED_CLOCK_MASK = BIT_(8),
|
||||
// DCD_USB_REQ_ENABLE_MASK = BIT_(31)
|
||||
//};
|
||||
|
||||
//------------- Device Interrupt USBDevInt -------------//
|
||||
enum {
|
||||
DEV_INT_FRAME_MASK = BIT_(0),
|
||||
DEV_INT_ENDPOINT_FAST_MASK = BIT_(1),
|
||||
DEV_INT_ENDPOINT_SLOW_MASK = BIT_(2),
|
||||
DEV_INT_DEVICE_STATUS_MASK = BIT_(3),
|
||||
DEV_INT_COMMAND_CODE_EMPTY_MASK = BIT_(4),
|
||||
DEV_INT_COMMAND_DATA_FULL_MASK = BIT_(5),
|
||||
DEV_INT_RX_ENDPOINT_PACKET_MASK = BIT_(6),
|
||||
DEV_INT_TX_ENDPOINT_PACKET_MASK = BIT_(7),
|
||||
DEV_INT_ENDPOINT_REALIZED_MASK = BIT_(8),
|
||||
DEV_INT_ERROR_MASK = BIT_(9),
|
||||
|
||||
DEV_INT_ALL_MASK = DEV_INT_FRAME_MASK | DEV_INT_ENDPOINT_FAST_MASK | DEV_INT_ENDPOINT_SLOW_MASK |
|
||||
DEV_INT_DEVICE_STATUS_MASK | DEV_INT_COMMAND_CODE_EMPTY_MASK | DEV_INT_COMMAND_DATA_FULL_MASK |
|
||||
DEV_INT_RX_ENDPOINT_PACKET_MASK | DEV_INT_TX_ENDPOINT_PACKET_MASK | DEV_INT_ENDPOINT_REALIZED_MASK |
|
||||
DEV_INT_ERROR_MASK
|
||||
};
|
||||
|
||||
//------------- DMA Interrupt USBDMAInt-------------//
|
||||
enum {
|
||||
DMA_INT_END_OF_XFER_MASK = BIT_(0),
|
||||
DMA_INT_NEW_DD_REQUEST_MASK = BIT_(1),
|
||||
DMA_INT_ERROR_MASK = BIT_(2)
|
||||
};
|
||||
|
||||
//------------- USBCtrl -------------//
|
||||
enum {
|
||||
SLAVE_CONTROL_READ_ENABLE_MASK = BIT_(0),
|
||||
SLAVE_CONTROL_WRITE_ENABLE_MASK = BIT_(1),
|
||||
SLAVE_CONTROL_READ_ENABLE_POS = 2
|
||||
};
|
||||
|
||||
//------------- USBRxPLen -------------//
|
||||
enum {
|
||||
SLAVE_RXPLEN_PACKET_LENGTH_MASK = (BIT_(10)-1),
|
||||
SLAVE_RXPLEN_DATA_VALID_MASK = BIT_(10),
|
||||
SLAVE_RXPLEN_PACKET_READY_MASK = BIT_(11),
|
||||
};
|
||||
|
||||
//------------- SIE Command Code -------------//
|
||||
enum {
|
||||
SIE_CMDPHASE_WRITE = 1,
|
||||
SIE_CMDPHASE_READ = 2,
|
||||
SIE_CMDPHASE_COMMAND = 5
|
||||
};
|
||||
|
||||
enum {
|
||||
// device commands
|
||||
SIE_CMDCODE_SET_ADDRESS = 0xd0,
|
||||
SIE_CMDCODE_CONFIGURE_DEVICE = 0xd8,
|
||||
SIE_CMDCODE_SET_MODE = 0xf3,
|
||||
SIE_CMDCODE_READ_FRAME_NUMBER = 0xf5,
|
||||
SIE_CMDCODE_READ_TEST_REGISTER = 0xfd,
|
||||
SIE_CMDCODE_DEVICE_STATUS = 0xfe,
|
||||
SIE_CMDCODE_GET_ERROR = 0xff,
|
||||
SIE_CMDCODE_READ_ERROR_STATUS = 0xfb,
|
||||
|
||||
// endpoint commands
|
||||
SIE_CMDCODE_ENDPOINT_SELECT = 0x00, // + endpoint index
|
||||
SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT = 0x40, // + endpoint index, should use USBEpIntClr instead
|
||||
SIE_CMDCODE_ENDPOINT_SET_STATUS = 0x40, // + endpoint index
|
||||
SIE_CMDCODE_BUFFER_CLEAR = 0xf2,
|
||||
SIE_CMDCODE_BUFFER_VALIDATE = 0xfa
|
||||
};
|
||||
|
||||
//------------- SIE Device Status (get/set from SIE_CMDCODE_DEVICE_STATUS) -------------//
|
||||
enum {
|
||||
SIE_DEV_STATUS_CONNECT_MASK = BIT_(0),
|
||||
SIE_DEV_STATUS_CONNECT_CHANGE_MASK = BIT_(1),
|
||||
SIE_DEV_STATUS_SUSPEND_MASK = BIT_(2),
|
||||
SIE_DEV_STATUS_SUSPEND_CHANGE_MASK = BIT_(3),
|
||||
SIE_DEV_STATUS_RESET_MASK = BIT_(4)
|
||||
};
|
||||
|
||||
//------------- SIE Endpoint Status -------------//
|
||||
enum {
|
||||
SIE_ENDPOINT_STATUS_FULL_EMPTY_MASK = BIT_(0), // 0: empty, 1 full. IN endpoint checks empty, OUT endpoint check full
|
||||
SIE_ENDPOINT_STATUS_STALL_MASK = BIT_(1),
|
||||
SIE_ENDPOINT_STATUS_SETUP_RECEIVED_MASK = BIT_(2), // clear by SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT
|
||||
SIE_ENDPOINT_STATUS_PACKET_OVERWRITTEN_MASK = BIT_(3), // previous packet is overwritten by a SETUP packet
|
||||
SIE_ENDPOINT_STATUS_NAK_MASK = BIT_(4), // last packet response is NAK (auto clear by an ACK)
|
||||
SIE_ENDPOINT_STATUS_BUFFER1_FULL_MASK = BIT_(5),
|
||||
SIE_ENDPOINT_STATUS_BUFFER2_FULL_MASK = BIT_(6)
|
||||
};
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -47,14 +47,12 @@
|
||||
//--------------------------------------------------------------------+
|
||||
#include "tusb.h"
|
||||
#include "tusb_descriptors.h" // TODO callback include
|
||||
#include "usbd_dcd.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO CONSTANT TYPEDEF
|
||||
//--------------------------------------------------------------------+
|
||||
//typedef struct {
|
||||
// volatile uint8_t state;
|
||||
//
|
||||
//};
|
||||
usbd_device_info_t usbd_devices[CONTROLLER_DEVICE_NUMBER];
|
||||
|
||||
// TODO fix/compress number of class driver
|
||||
static device_class_driver_t const usbh_class_drivers[TUSB_CLASS_MAX_CONSEC_NUMBER] =
|
||||
@ -79,6 +77,47 @@ static tusb_error_t usbd_string_descriptor_init(void);
|
||||
//
|
||||
//}
|
||||
|
||||
void usbd_bus_reset(uint32_t coreid)
|
||||
{
|
||||
memclr_(usbd_devices, sizeof(usbd_device_info_t)*CONTROLLER_DEVICE_NUMBER);
|
||||
}
|
||||
|
||||
void std_get_descriptor(uint8_t coreid)
|
||||
{
|
||||
tusb_std_descriptor_type_t const desc_type = usbd_devices[coreid].setup_packet.wValue >> 8;
|
||||
uint8_t const desc_index = u16_low_u8( usbd_devices[coreid].setup_packet.wValue );
|
||||
switch ( desc_type )
|
||||
{
|
||||
case TUSB_DESC_TYPE_DEVICE:
|
||||
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
void usbd_setup_received(uint8_t coreid)
|
||||
{
|
||||
usbd_device_info_t *p_device = &usbd_devices[coreid];
|
||||
switch ( p_device->setup_packet.bRequest)
|
||||
{
|
||||
case TUSB_REQUEST_GET_DESCRIPTOR:
|
||||
std_get_descriptor(coreid);
|
||||
break;
|
||||
|
||||
case TUSB_REQUEST_SET_ADDRESS:
|
||||
p_device->address = (uint8_t) p_device->setup_packet.wValue;
|
||||
dcd_device_set_address(coreid, p_device->address);
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
// dcd_pipe_control_write_zero_length(coreid);
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// IMPLEMENTATION
|
||||
//--------------------------------------------------------------------+
|
||||
@ -89,7 +128,6 @@ tusb_error_t usbd_init (void)
|
||||
ASSERT_STATUS ( dcd_init() );
|
||||
|
||||
uint16_t length = 0;
|
||||
|
||||
#if TUSB_CFG_DEVICE_HID_KEYBOARD
|
||||
ASSERT_STATUS( hidd_init(&app_tusb_desc_configuration.keyboard_interface, &length) );
|
||||
#endif
|
||||
@ -98,6 +136,8 @@ tusb_error_t usbd_init (void)
|
||||
ASSERT_STATUS( hidd_init(&app_tusb_desc_configuration.mouse_interface, &length) );
|
||||
#endif
|
||||
|
||||
usbd_bus_reset(0);
|
||||
|
||||
#ifndef _TEST_
|
||||
hal_interrupt_enable(0); // TODO USB1
|
||||
#endif
|
||||
@ -109,6 +149,28 @@ tusb_error_t usbd_init (void)
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// callback from DCD ISR
|
||||
//--------------------------------------------------------------------+
|
||||
void usbd_isr(uint8_t coreid, tusb_event_t event)
|
||||
{
|
||||
switch(event)
|
||||
{
|
||||
case TUSB_EVENT_BUS_RESET:
|
||||
usbd_bus_reset(coreid);
|
||||
break;
|
||||
|
||||
case TUSB_EVENT_SETUP_RECEIVED:
|
||||
usbd_setup_received(coreid);
|
||||
break;
|
||||
|
||||
default:
|
||||
ASSERT(false, (void) 0);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// HELPER
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
77
tinyusb/device/usbd_dcd.h
Normal file
77
tinyusb/device/usbd_dcd.h
Normal file
@ -0,0 +1,77 @@
|
||||
/**************************************************************************/
|
||||
/*!
|
||||
@file usbd_dcd.h
|
||||
@author hathach (tinyusb.org)
|
||||
|
||||
@section LICENSE
|
||||
|
||||
Software License Agreement (BSD License)
|
||||
|
||||
Copyright (c) 2013, hathach (tinyusb.org)
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are met:
|
||||
1. Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
2. Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the distribution.
|
||||
3. Neither the name of the copyright holders nor the
|
||||
names of its contributors may be used to endorse or promote products
|
||||
derived from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
|
||||
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
|
||||
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
This file is part of the tinyusb stack.
|
||||
*/
|
||||
/**************************************************************************/
|
||||
|
||||
/** \ingroup TBD
|
||||
* \defgroup TBD
|
||||
* \brief TBD
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _TUSB_USBD_DCD_H_
|
||||
#define _TUSB_USBD_DCD_H_
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// INCLUDE
|
||||
//--------------------------------------------------------------------+
|
||||
#include "common/common.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef struct {
|
||||
volatile uint8_t state;
|
||||
uint8_t address;
|
||||
tusb_std_request_t setup_packet;
|
||||
|
||||
}usbd_device_info_t;
|
||||
|
||||
extern usbd_device_info_t usbd_devices[CONTROLLER_DEVICE_NUMBER];
|
||||
//--------------------------------------------------------------------+
|
||||
// callback from DCD ISR
|
||||
//--------------------------------------------------------------------+
|
||||
void usbd_isr(uint8_t coreid, tusb_event_t event);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _TUSB_USBD_DCD_H_ */
|
||||
|
||||
/** @} */
|
||||
@ -46,11 +46,16 @@
|
||||
#include "common/common.h"
|
||||
#include "hal.h"
|
||||
|
||||
enum {
|
||||
PCONP_PCUSB = 31
|
||||
};
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// IMPLEMENTATION
|
||||
//--------------------------------------------------------------------+
|
||||
tusb_error_t hal_init(void)
|
||||
{
|
||||
//------------- user manual 11.13 usb device controller initialization -------------//
|
||||
// TODO remove magic number
|
||||
/* Enable AHB clock to the USB block and USB RAM. */
|
||||
// LPC_SYSCON->SYSAHBCLKCTRL |= ((0x1<<14) | (0x1<<27));
|
||||
@ -61,7 +66,7 @@ tusb_error_t hal_init(void)
|
||||
// LPC_PINCON->PINSEL3 &= ~(3<<6); TODO HOST
|
||||
// LPC_PINCON->PINSEL3 |= (2<<6);
|
||||
|
||||
LPC_SC->PCONP |= (1UL<<31); /* USB PCLK -> enable USB Per.*/
|
||||
LPC_SC->PCONP |= BIT_(PCONP_PCUSB); /* USB PCLK -> enable USB Per.*/
|
||||
|
||||
// DEVICE mode
|
||||
LPC_USB->USBClkCtrl = 0x12; /* Dev, PortSel, AHB clock enable */
|
||||
|
||||
@ -52,6 +52,9 @@
|
||||
|
||||
#include "LPC17xx.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
//
|
||||
//--------------------------------------------------------------------+
|
||||
static inline void hal_interrupt_enable(uint8_t controller_id)
|
||||
{
|
||||
(void) controller_id; // discard compiler's warning
|
||||
|
||||
@ -172,9 +172,6 @@
|
||||
#define USB_FS_MAX_BULK_PACKET 64
|
||||
#define USB_HS_MAX_BULK_PACKET USB_FS_MAX_BULK_PACKET /* Full speed device only */
|
||||
|
||||
// Control Endpoint
|
||||
#define USB_MAX_PACKET0 64
|
||||
|
||||
/* HID In/Out Endpoint Address */
|
||||
#define HID_KEYBOARD_EP_IN ENDPOINT_IN_LOGICAL_TO_PHYSICAL(1)
|
||||
#define HID_MOUSE_EP_IN ENDPOINT_IN_LOGICAL_TO_PHYSICAL(4)
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user