mirror/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-02-06 12:39:54 +00:00
Code Issues Packages Projects Releases Wiki Activity

clean up things, add makefile for host example

Browse Source
This commit is contained in:
hathach 2020-05-04 00:29:52 +07:00
parent 9538ca7d74
commit 4a3a448340
10 changed files with 104 additions and 78 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
examples/host/cdc_msc_hid/Makefile Normal file
View File

@ -0,0 +1,22 @@
include ../../../tools/top.mk
include ../../make.mk
INC += \
src \
$(TOP)/hw \
# Example source
EXAMPLE_SOURCE += $(wildcard src/*.c)
SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
# TinyUSB Host Stack source
SRC_C += \
src/host/usbh.c \
src/host/hub.c \
src/host/ehci/ehci.c \
src/class/cdc/cdc_host.c \
src/host/ehci/ehci.c \
src/portable/nxp/lpc18_43/hcd_lpc18_43.c
include ../../rules.mk

21
examples/host/cdc_msc_hid/ses/lpc18xx/lpc18xx.emProject
View File

@ -17,8 +17,8 @@
arm_target_debug_interface_type="ADIv5"
arm_target_device_name="LPC1857"
arm_target_interface_type="SWD"
c_preprocessor_definitions="LPC18xx;__LPC1800_FAMILY;__LPC185x_SUBFAMILY;ARM_MATH_CM3;FLASH_PLACEMENT=1;CORE_M3;BOARD_MCB1800;CFG_TUSB_MCU=OPT_MCU_LPC18XX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss2")))"
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)//inc;$(lpcDir)//inc/config_18xx"
c_preprocessor_definitions="LPC18xx;__LPC1800_FAMILY;__LPC185x_SUBFAMILY;ARM_MATH_CM3;FLASH_PLACEMENT=1;CORE_M3;BOARD_MCB1800;CFG_TUSB_MCU=OPT_MCU_LPC18XX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss2")));CFG_TUSB_DEBUG=2"
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)//inc;$(lpcDir)//inc/config_18xx;$(rootDir)/lib/SEGGER_RTT/RTT"
debug_register_definition_file="$(ProjectDir)/LPC18xx_Registers.xml"
debug_target_connection="J-Link"
gcc_entry_point="Reset_Handler"
@ -101,12 +101,6 @@
</folder>
</folder>
</folder>
<folder
Name="segger_rtt"
exclude=""
filter="*.c;*.h"
path="../../../../../lib/segger_rtt"
recurse="No" />
<folder
Name="src"
exclude=""
@ -119,6 +113,17 @@
filter="*.c;*.h"
path="../../../../../src"
recurse="Yes" />
<folder Name="lib">
<folder Name="SEGGER_RTT">
<folder Name="RTT">
<file file_name="../../../../../lib/SEGGER_RTT/RTT/SEGGER_RTT.c" />
<file file_name="../../../../../lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c" />
</folder>
<folder Name="Syscalls">
<file file_name="../../../../../lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_SES.c" />
</folder>
</folder>
</folder>
</project>
<configuration
Name="MCB1800"

19
examples/host/cdc_msc_hid/ses/lpc43xx/lpc43xx.emProject
View File

@ -20,7 +20,7 @@
arm_target_interface_type="SWD"
build_treat_warnings_as_errors="No"
c_preprocessor_definitions="CORE_M4;__LPC4300_FAMILY;__LPC435x_SUBFAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;BOARD_EA4357;CFG_TUSB_MCU=OPT_MCU_LPC43XX;CFG_TUSB_MEM_SECTION= __attribute__((section(&quot;.bss2&quot;)))"
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)//inc;$(lpcDir)//inc/config_43xx"
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)//inc;$(rootDir)/lib/SEGGER_RTT/RTT;$(lpcDir)//inc/config_43xx"
debug_register_definition_file="LPC43xx_Registers.xml"
debug_target_connection="J-Link"
gcc_enable_all_warnings="Yes"
@ -122,11 +122,16 @@
<file file_name="LPC43xx_Vectors.s" />
<file file_name="thumb_crt0.s" />
</folder>
<folder
Name="segger_rtt"
exclude=""
filter="*.c;*.h"
path="../../../../../lib/segger_rtt"
recurse="No" />
<folder Name="lib">
<folder Name="SEGGER_RTT">
<folder Name="RTT">
<file file_name="../../../../../lib/SEGGER_RTT/RTT/SEGGER_RTT.c" />
<file file_name="../../../../../lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c" />
</folder>
<folder Name="Syscalls">
<file file_name="../../../../../lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_SES.c" />
</folder>
</folder>
</folder>
</project>
</solution>

2
examples/host/cdc_msc_hid/src/main.c
View File

@ -193,7 +193,7 @@ void print_greeting(void)
printf("- issue at https://github.com/hathach/tinyusb\n");
printf("--------------------------------------------------------------------\n\n");
printf("This Host demo is configured to support:");
printf("This Host demo is configured to support:\r\n");
printf(" - RTOS = %s\n", rtos_name[CFG_TUSB_OS]);
// if (CFG_TUH_CDC ) puts(" - Communication Device Class");
// if (CFG_TUH_MSC ) puts(" - Mass Storage");

15
examples/host/cdc_msc_hid/src/tusb_config.h
View File

@ -75,23 +75,10 @@
#define CFG_TUH_HID_MOUSE 0
#define CFG_TUSB_HOST_HID_GENERIC 0 // (not yet supported)
#define CFG_TUH_MSC 0
#define CFG_TUH_VENDOR 0
#define CFG_TUSB_HOST_DEVICE_MAX (CFG_TUH_HUB ? 5 : 1) // normal hub has 4 ports
//------------- CLASS -------------//
#define CFG_TUD_CDC 0
#define CFG_TUD_MSC 0
#define CFG_TUD_HID 0
#define CFG_TUD_VENDOR 0
// CDC FIFO size of TX and RX
#define CFG_TUD_CDC_RX_BUFSIZE 64
#define CFG_TUD_CDC_TX_BUFSIZE 64
// MSC Buffer size of Device Mass storage
#define CFG_TUD_MSC_BUFSIZE 512
#ifdef __cplusplus
}
#endif

15
hw/bsp/ea4357/ea4357.c
View File

@ -63,7 +63,7 @@ const uint32_t ExtRateIn = 0;
static const PINMUX_GRP_T pinmuxing[] =
{
// Button
// Button ( Joystick down )
{0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)},
// UART
@ -139,21 +139,26 @@ void board_init(void)
USBMODE_VBUS_HIGH = 1
};
/* USB0
* For USB0 Device operation:
* - insert jumpers in position 1-2 in JP17/JP18/JP19.
/* From EA4357 user manual
*
* USB0 Device operation:
* - Insert jumpers in position 1-2 in JP17/JP18/JP19.
* - GPIO28 controls USB connect functionality
* - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default.
* - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS
* sensing.
*
* For USB0 Host operation:
* USB0 Host operation:
* - insert jumpers in position 2-3 in JP17/JP18/JP19.
* - USB Host power is controlled via distribution switch U20 (found in schematic page 11).
* - Signal GPIO26 is active low and enables +5V on VBUS2.
* - LED35 light whenever +5V is present on VBUS2.
* - GPIO55 is connected to status feedback from the distribution switch.
* - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active
*
* Note:
* - Insert jumpers in position 2-3 in JP17/JP18/JP19
* - Insert jumpers in JP31 (OTG)
*/
#if CFG_TUSB_RHPORT0_MODE
Chip_USB0_Init();

71
hw/bsp/mcb1800/mcb1800.c
View File

@ -76,30 +76,27 @@ const uint32_t ExtRateIn = 0;
static const PINMUX_GRP_T pinmuxing[] =
{
// LEDs
{0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4)},
{0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN)},
{0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN)},
{0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN)},
{0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN)},
{0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN)},
{0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN)},
{0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN)},
// LEDs
{ 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) },
{ 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) },
{ 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) },
{ 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) },
{ 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) },
{ 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) },
{ 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) },
{ 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) },
// Button
{0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)},
// Button
{ 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) },
// UART
{UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 },
{UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 },
// UART
{ UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 },
{ UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 },
/* I2S */
{0x3, 0, (SCU_PINIO_FAST | SCU_MODE_FUNC2)},
{0x6, 0, (SCU_PINIO_FAST | SCU_MODE_FUNC4)},
{0x7, 2, (SCU_PINIO_FAST | SCU_MODE_FUNC2)},
{0x6, 2, (SCU_PINIO_FAST | SCU_MODE_FUNC3)},
{0x7, 1, (SCU_PINIO_FAST | SCU_MODE_FUNC2)},
{0x6, 1, (SCU_PINIO_FAST | SCU_MODE_FUNC3)},
// USB
{ 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function
{ 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION */
{ 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 } // P6_3 USB0_PWR_EN, USB0 VBus function
};
/* Pin clock mux values, re-used structure, value in first index is meaningless */
@ -147,10 +144,10 @@ void board_init(void)
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN);
//------------- UART -------------//
Chip_UART_Init(UART_DEV);
Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE);
Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS);
Chip_UART_TXEnable(UART_DEV);
Chip_UART_Init(UART_DEV);
Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE);
Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS);
Chip_UART_TXEnable(UART_DEV);
//------------- USB -------------//
enum {
@ -167,17 +164,19 @@ void board_init(void)
#if CFG_TUSB_RHPORT0_MODE
Chip_USB0_Init();
// // Reset controller
// LPC_USB0->USBCMD_D |= 0x02;
// while( LPC_USB0->USBCMD_D & 0x02 ) {}
//
// // Set mode
// #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
// LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
// #else // TODO OTG
// LPC_USB0->USBMODE_D = USBMODE_DEVICE;
// LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
// #endif
// Host/Device mode can only be set right after controller reset
LPC_USB0->USBCMD_D |= 0x02;
while( LPC_USB0->USBCMD_D & 0x02 ) {}
// Set mode
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
#else // TODO OTG
LPC_USB0->USBMODE_D = USBMODE_DEVICE;
LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
#endif
#endif
// USB1

1
src/class/cdc/cdc_host.c
View File

@ -86,7 +86,6 @@ bool tuh_cdc_serial_is_mounted(uint8_t dev_addr)
{
// TODO consider all AT Command as serial candidate
return tuh_cdc_mounted(dev_addr) &&
(CDC_COMM_PROTOCOL_NONE <= cdch_data[dev_addr-1].itf_protocol) &&
(cdch_data[dev_addr-1].itf_protocol <= CDC_COMM_PROTOCOL_ATCOMMAND_CDMA);
}

6
src/host/ehci/ehci.c
View File

@ -358,7 +358,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
if ( dev_addr == 0 ) return true;
// Insert to list
ehci_link_t * list_head;
ehci_link_t * list_head = NULL;
switch (ep_desc->bmAttributes.xfer)
{
@ -378,8 +378,10 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
default: break;
}
TU_ASSERT(list_head);
// TODO might need to disable async/period list
list_insert( list_head, (ehci_link_t*) p_qhd, EHCI_QTYPE_QHD);
list_insert(list_head, (ehci_link_t*) p_qhd, EHCI_QTYPE_QHD);
return true;
}

10
test/test/support/tusb_config.h
View File

@ -43,10 +43,12 @@
#define CFG_TUSB_MCU OPT_MCU_NRF5X
#endif
#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
#else
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE
#ifndef CFG_TUSB_RHPORT0_MODE
#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
#else
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE
#endif
#endif
#define CFG_TUSB_OS OPT_OS_NONE