adding nulceo stm32u5a5, fix clock configure issue

dwc2 core stuck at reset
2025-03-14 04:18:56 +00:00 · 2023-10-18 18:43:07 +07:00 · 2023-10-18 18:43:07 +07:00 · 27a2c8cba4
commit 27a2c8cba4
parent 5025e80c9e
12 changed files with 643 additions and 70 deletions
--- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h
+++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h
@ -55,12 +55,10 @@ extern "C"
 // RCC Clock
 //--------------------------------------------------------------------+

-static inline void board_clock_init(void)
-{
-
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+static void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 };

  /* Enable Power Clock*/
  __HAL_RCC_PWR_CLK_ENABLE();
@ -94,7 +92,8 @@ static inline void board_clock_init(void)

  /** Initializes the CPU, AHB and APB buses clocks
   */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
+  RCC_ClkInitStruct.ClockType =
+      RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
@ -104,6 +103,8 @@ static inline void board_clock_init(void)
  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
 }

+static void SystemPower_Config(void) {
+}

 #ifdef __cplusplus
 }
--- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h
+++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h
@ -54,12 +54,10 @@ extern "C"
 // RCC Clock
 //--------------------------------------------------------------------+

-static inline void board_clock_init(void)
-{
-
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+static void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 };

  /* Enable Power Clock */
  __HAL_RCC_PWR_CLK_ENABLE();
@ -93,7 +91,8 @@ static inline void board_clock_init(void)

  /** Initializes the CPU, AHB and APB buses clocks
   */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
+  RCC_ClkInitStruct.ClockType =
+      RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
@ -103,6 +102,8 @@ static inline void board_clock_init(void)
  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
 }

+static void SystemPower_Config(void) {
+}

 #ifdef __cplusplus
 }
--- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld
+++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/STM32U5A5ZJTXQ_FLASH.ld
@ -0,0 +1,167 @@
+/*
+******************************************************************************
+**
+**  File        : LinkerScript.ld
+**
+**  Author      : STM32CubeIDE
+**
+**  Abstract    : Linker script for STM32U5A5xJ Device from STM32U5 series
+**                      4096Kbytes FLASH
+**                      2512Kbytes RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Distribution: The file is distributed as is without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** Copyright (c) 2023 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+  RAM   (xrw) : ORIGIN = 0x20000000, LENGTH = 2496K
+  SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K
+  FLASH (rx)  : ORIGIN = 0x08000000, LENGTH = 4096K
+}
+
+/* Sections */
+SECTIONS
+{
+  /* The startup code into "FLASH" Rom type memory */
+  .isr_vector :
+  {
+    KEEP(*(.isr_vector)) /* Startup code */
+  } >FLASH
+
+  /* The program code and other data into "FLASH" Rom type memory */
+  .text :
+  {
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data into "FLASH" Rom type memory */
+  .rodata :
+  {
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+  } >FLASH
+
+  .ARM.extab :
+  {
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+  } >FLASH
+
+  .ARM :
+  {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* Used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections into "RAM" Ram type memory */
+  .data :
+  {
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+    *(.RamFunc)        /* .RamFunc sections */
+    *(.RamFunc*)       /* .RamFunc* sections */
+
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  /* Uninitialized data section into "RAM" Ram type memory */
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  /* Remove information from the compiler libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
--- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake
+++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.cmake
@ -1,7 +1,7 @@
 set(MCU_VARIANT stm32u5a5xx)
 set(JLINK_DEVICE stm32u5a5zj)

-set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U5A9xx_FLASH.ld)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32U5A5ZJTXQ_FLASH.ld)

 function(update_board TARGET)
  target_compile_definitions(${TARGET} PUBLIC
--- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h
+++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h
@ -54,46 +54,44 @@ extern "C"
 // RCC Clock
 //--------------------------------------------------------------------+

-static inline void board_clock_init(void)
-{
+static void SystemClock_Config(void) {
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };

-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
-
-  /* Enable Power Clock */
  __HAL_RCC_PWR_CLK_ENABLE();
+  HAL_PWREx_EnableVddA();

  /** Configure the main internal regulator output voltage
-   */
-  HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+  */
+  if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) {
+    Error_Handler();
+  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1;
  RCC_OscInitStruct.PLL.PLLM = 1;
-  RCC_OscInitStruct.PLL.PLLN = 10;
-  RCC_OscInitStruct.PLL.PLLP = 2;
+  RCC_OscInitStruct.PLL.PLLN = 20;
+  RCC_OscInitStruct.PLL.PLLP = 8;
  RCC_OscInitStruct.PLL.PLLQ = 2;
-  RCC_OscInitStruct.PLL.PLLR = 1;
+  RCC_OscInitStruct.PLL.PLLR = 2;
  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1;
  RCC_OscInitStruct.PLL.PLLFRACN = 0;
-  HAL_RCC_OscConfig(&RCC_OscInitStruct);
-
-  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
-  PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48;
-
-  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+    Error_Handler();
+  }

  /** Initializes the CPU, AHB and APB buses clocks
-   */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2
+                                | RCC_CLOCKTYPE_PCLK3;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
@ -103,6 +101,19 @@ static inline void board_clock_init(void)
  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
 }

+static void SystemPower_Config(void) {
+  HAL_PWREx_EnableVddIO2();
+
+  /*
+   * Switch to SMPS regulator instead of LDO
+   */
+  if (HAL_PWREx_ConfigSupply(PWR_SMPS_SUPPLY) != HAL_OK) {
+    Error_Handler();
+  }
+/* USER CODE BEGIN PWR */
+/* USER CODE END PWR */
+}
+

 #ifdef __cplusplus
 }
--- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk
+++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk
@ -2,7 +2,7 @@ CFLAGS += \
  -DSTM32U5A5xx \

 # All source paths should be relative to the top level.
-LD_FILE = ${ST_CMSIS}/Source/Templates/gcc/linker/STM32U5A9xx_FLASH.ld
+LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld

 SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s

--- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/cubemx/stm32u5a5nucleo.ioc
+++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/cubemx/stm32u5a5nucleo.ioc
@ -0,0 +1,352 @@
+#MicroXplorer Configuration settings - do not modify
+ADC1.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_2
+ADC1.IPParameters=Rank-1\#ChannelRegularConversion,master,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,OffsetNumber-1\#ChannelRegularConversion,MonitoredBy-1\#ChannelRegularConversion,NbrOfConversionFlag
+ADC1.MonitoredBy-1\#ChannelRegularConversion=__NULL
+ADC1.NbrOfConversionFlag=1
+ADC1.OffsetNumber-1\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.Rank-1\#ChannelRegularConversion=1
+ADC1.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_5CYCLE
+ADC1.master=1
+CAD.formats=
+CAD.pinconfig=
+CAD.provider=
+CORTEX_M33_NS.userName=CORTEX_M33
+File.Version=6
+GPDMA1.DIRECTION_GPDMACH0=DMA_MEMORY_TO_PERIPH
+GPDMA1.DIRECTION_GPDMACH3=DMA_MEMORY_TO_PERIPH
+GPDMA1.IPHANDLE_GPDMACH0-SIMPLEREQUEST_GPDMACH0=__NULL
+GPDMA1.IPHANDLE_GPDMACH3-SIMPLEREQUEST_GPDMACH3=__NULL
+GPDMA1.IPHANDLE_GPDMACH5-SIMPLEREQUEST_GPDMACH5=__NULL
+GPDMA1.IPParameters=IPHANDLE_GPDMACH5-SIMPLEREQUEST_GPDMACH5,REQUEST_GPDMACH5,IPHANDLE_GPDMACH3-SIMPLEREQUEST_GPDMACH3,REQUEST_GPDMACH3,DIRECTION_GPDMACH3,IPHANDLE_GPDMACH0-SIMPLEREQUEST_GPDMACH0,REQUEST_GPDMACH0,DIRECTION_GPDMACH0,SRCINC_GPDMACH0
+GPDMA1.REQUEST_GPDMACH0=GPDMA1_REQUEST_USART1_TX
+GPDMA1.REQUEST_GPDMACH3=GPDMA1_REQUEST_UCPD1_TX
+GPDMA1.REQUEST_GPDMACH5=GPDMA1_REQUEST_UCPD1_RX
+GPDMA1.SRCINC_GPDMACH0=DMA_SINC_INCREMENTED
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
+MMTAppReg1.MEMORYMAP.AP=RW_priv_only
+MMTAppReg1.MEMORYMAP.AppRegionName=RAM
+MMTAppReg1.MEMORYMAP.ContextName=CortexM33
+MMTAppReg1.MEMORYMAP.CoreName=ARM Cortex-M33
+MMTAppReg1.MEMORYMAP.DefaultDataRegion=true
+MMTAppReg1.MEMORYMAP.IPParameters=StartAddress,Size,CoreName,DefaultDataRegion,ContextName,Name,AP
+MMTAppReg1.MEMORYMAP.Name=RAM
+MMTAppReg1.MEMORYMAP.Size=2555904
+MMTAppReg1.MEMORYMAP.StartAddress=0x20000000
+MMTAppReg2.MEMORYMAP.AppRegionName=RAM Reserved Alias Region
+MMTAppReg2.MEMORYMAP.CoreName=ARM Cortex-M33
+MMTAppReg2.MEMORYMAP.DefaultDataRegion=false
+MMTAppReg2.MEMORYMAP.IPParameters=StartAddress,Size,CoreName,DefaultDataRegion,ReservedRegion,Name
+MMTAppReg2.MEMORYMAP.Name=RAM Reserved Alias Region
+MMTAppReg2.MEMORYMAP.ReservedRegion=true
+MMTAppReg2.MEMORYMAP.Size=2555904
+MMTAppReg2.MEMORYMAP.StartAddress=0x0A000000
+MMTAppReg3.MEMORYMAP.AP=RO_priv_only
+MMTAppReg3.MEMORYMAP.AppRegionName=FLASH
+MMTAppReg3.MEMORYMAP.Cacheability=WTRA
+MMTAppReg3.MEMORYMAP.ContextName=CortexM33
+MMTAppReg3.MEMORYMAP.CoreName=ARM Cortex-M33
+MMTAppReg3.MEMORYMAP.DefaultCodeRegion=true
+MMTAppReg3.MEMORYMAP.DefaultDataRegion=false
+MMTAppReg3.MEMORYMAP.IPParameters=StartAddress,Size,CoreName,DefaultDataRegion,MemType,ContextName,Name,AP,Cacheability,DefaultCodeRegion
+MMTAppReg3.MEMORYMAP.MemType=ROM
+MMTAppReg3.MEMORYMAP.Name=FLASH
+MMTAppReg3.MEMORYMAP.Size=4194304
+MMTAppReg3.MEMORYMAP.StartAddress=0x08000000
+MMTAppRegionsCount=3
+MMTConfigApplied=false
+Mcu.CPN=STM32U5A5ZJT6Q
+Mcu.ContextProject=TrustZoneDisabled
+Mcu.Family=STM32U5
+Mcu.IP0=ADC1
+Mcu.IP1=CORTEX_M33_NS
+Mcu.IP10=UCPD1
+Mcu.IP11=USART1
+Mcu.IP12=USBPD
+Mcu.IP13=USBX
+Mcu.IP14=USB_OTG_HS
+Mcu.IP2=GPDMA1
+Mcu.IP3=ICACHE
+Mcu.IP4=MEMORYMAP
+Mcu.IP5=NVIC
+Mcu.IP6=PWR
+Mcu.IP7=RCC
+Mcu.IP8=SYS
+Mcu.IP9=THREADX
+Mcu.IPNb=15
+Mcu.Name=STM32U5A5ZJTxQ
+Mcu.Package=LQFP144
+Mcu.Pin0=PH0-OSC_IN (PH0)
+Mcu.Pin1=PH1-OSC_OUT (PH1)
+Mcu.Pin10=VP_GPDMA1_VS_GPDMACH0
+Mcu.Pin11=VP_GPDMA1_VS_GPDMACH3
+Mcu.Pin12=VP_GPDMA1_VS_GPDMACH5
+Mcu.Pin13=VP_ICACHE_VS_ICACHE
+Mcu.Pin14=VP_PWR_VS_DBSignals
+Mcu.Pin15=VP_PWR_VS_SECSignals
+Mcu.Pin16=VP_PWR_VS_LPOM
+Mcu.Pin17=VP_SYS_VS_tim6
+Mcu.Pin18=VP_THREADX_VS_RTOSJjThreadXJjCoreJjDefault
+Mcu.Pin19=VP_USBPD_VS_USBPD1
+Mcu.Pin2=PC1
+Mcu.Pin20=VP_USBPD_VS_PD3TYPEC
+Mcu.Pin21=VP_USBPD_VS_usbpd_tim2
+Mcu.Pin22=VP_USBPD_VS_usbpd_usb_cohabitation
+Mcu.Pin23=VP_USBX_Core_System
+Mcu.Pin24=VP_USBX_UX Device CoreStack_HS
+Mcu.Pin25=VP_USBX_UX Device Controller_HS
+Mcu.Pin26=VP_USBX_UX Device CDC ACM Class_HS
+Mcu.Pin27=VP_MEMORYMAP_VS_MEMORYMAP
+Mcu.Pin3=PB15
+Mcu.Pin4=PG2
+Mcu.Pin5=PA9
+Mcu.Pin6=PA10
+Mcu.Pin7=PA11
+Mcu.Pin8=PA12
+Mcu.Pin9=PA15 (JTDI)
+Mcu.PinsNb=28
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32U5A5ZJTxQ
+MxCube.Version=6.9.2
+MxDb.Version=DB.6.0.92
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.GPDMA1_Channel0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true\:true
+NVIC.GPDMA1_Channel3_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true\:true
+NVIC.GPDMA1_Channel5_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
+NVIC.OTG_HS_IRQn=true\:7\:0\:true\:false\:true\:false\:true\:true\:true
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:false
+NVIC.SavedPendsvIrqHandlerGenerated=true
+NVIC.SavedSvcallIrqHandlerGenerated=true
+NVIC.SavedSystickIrqHandlerGenerated=true
+NVIC.SysTick_IRQn=true\:0\:0\:true\:false\:false\:false\:false\:true\:false
+NVIC.TIM6_IRQn=true\:15\:0\:false\:false\:true\:false\:false\:true\:true
+NVIC.TimeBase=TIM6_IRQn
+NVIC.TimeBaseIP=TIM6
+NVIC.UCPD1_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:false\:true
+NVIC.USART1_IRQn=true\:6\:0\:true\:false\:true\:false\:true\:true\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
+PA10.GPIOParameters=GPIO_Speed,GPIO_PuPd
+PA10.GPIO_PuPd=GPIO_PULLUP
+PA10.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
+PA11.GPIOParameters=GPIO_Speed
+PA11.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA11.Mode=Internal_Phy_Device
+PA11.Signal=USB_OTG_HS_DM
+PA12.GPIOParameters=GPIO_Speed
+PA12.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PA12.Mode=Internal_Phy_Device
+PA12.Signal=USB_OTG_HS_DP
+PA15\ (JTDI).Mode=Sink_AllSignals
+PA15\ (JTDI).Signal=UCPD1_CC1
+PA9.GPIOParameters=GPIO_Speed,GPIO_PuPd
+PA9.GPIO_PuPd=GPIO_PULLUP
+PA9.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PA9.Mode=Asynchronous
+PA9.Signal=USART1_TX
+PB15.Mode=Sink_AllSignals
+PB15.Signal=UCPD1_CC2
+PC1.Mode=IN2-Single-Ended
+PC1.Signal=ADC1_IN2
+PG2.GPIOParameters=GPIO_Label
+PG2.GPIO_Label=LED_RED
+PG2.Locked=true
+PG2.Signal=GPIO_Output
+PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
+PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
+PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
+PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
+PWR.IPParameters=PowerMode
+PWR.PowerMode=PWR_SMPS_SUPPLY
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32U5A5ZJTxQ
+ProjectManager.Example=Ux_Device_CDC_ACM
+ProjectManager.ExampleSource=MxCubeFw
+ProjectManager.FirmwarePackage=STM32Cube FW_U5 V1.3.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LPBAM.generateCode=
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=1
+ProjectManager.MainLocation=Core/Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=stm32u5a5nucleo.ioc
+ProjectManager.ProjectName=stm32u5a5nucleo
+ProjectManager.ProjectStructure=
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=STM32CubeIDE
+ProjectManager.ToolChainLocation=
+ProjectManager.UAScriptAfterPath=
+ProjectManager.UAScriptBeforePath=
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_GPDMA1_Init-GPDMA1-false-HAL-true,4-MX_ICACHE_Init-ICACHE-false-HAL-true,5-MX_USART1_UART_Init-USART1-false-HAL-false,6-MX_UCPD1_Init-UCPD1-false-LL-true,7-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-true-HAL-false,8-MX_USBPD_Init-USBPD-false-HAL-false,9-MX_USBX_Init-USBX-false-HAL-false,10-MX_ADC1_Init-ADC1-false-HAL-true,11-MX_MEMORYMAP_Init-MEMORYMAP-false-HAL-true,0-MX_CORTEX_M33_NS_Init-CORTEX_M33_NS-false-HAL-true,0-MX_PWR_Init-PWR-false-HAL-true
+RCC.ADCFreq_Value=16000000
+RCC.ADF1Freq_Value=160000000
+RCC.AHBFreq_Value=160000000
+RCC.APB1Freq_Value=160000000
+RCC.APB1TimFreq_Value=160000000
+RCC.APB2Freq_Value=160000000
+RCC.APB2TimFreq_Value=160000000
+RCC.APB3Freq_Value=160000000
+RCC.CK48Freq_Value=48000000
+RCC.CRSFreq_Value=48000000
+RCC.CortexFreq_Value=160000000
+RCC.DACCLockSelectionVirtual=RCC_DAC1CLKSOURCE_LSI
+RCC.DACFreq_Value=32000
+RCC.EPOD_VALUE=16000000
+RCC.FCLKCortexFreq_Value=160000000
+RCC.FDCANFreq_Value=160000000
+RCC.FamilyName=M
+RCC.HCLKFreq_Value=160000000
+RCC.HSE_VALUE=16000000
+RCC.HSI48_VALUE=48000000
+RCC.HSI_VALUE=16000000
+RCC.I2C1Freq_Value=160000000
+RCC.I2C2Freq_Value=160000000
+RCC.I2C3Freq_Value=160000000
+RCC.I2C4Freq_Value=160000000
+RCC.I2C5Freq_Value=160000000
+RCC.I2C6Freq_Value=160000000
+RCC.IPParameters=ADCFreq_Value,ADF1Freq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,CK48Freq_Value,CRSFreq_Value,CortexFreq_Value,DACCLockSelectionVirtual,DACFreq_Value,EPOD_VALUE,FCLKCortexFreq_Value,FDCANFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2C5Freq_Value,I2C6Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSIDIV_VALUE,LSI_VALUE,MCO1PinFreq_Value,MDF1Freq_Value,MSIClockRange,MSI_VALUE,OCTOSPIMFreq_Value,PLL1P,PLL2FRACN,PLL2PoutputFreq_Value,PLL2QoutputFreq_Value,PLL2RoutputFreq_Value,PLL3FRACN,PLL3PoutputFreq_Value,PLL3QoutputFreq_Value,PLL3RoutputFreq_Value,PLLFRACN,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSourceVirtual,RNGFreq_Value,SAESFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPI1Freq_Value,SPI2Freq_Value,SPI3Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBPHYCLockSelection,USBPHYFreq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOPLL2OutputFreq_Value,VCOPLL3OutputFreq_Value
+RCC.LPTIM2Freq_Value=160000000
+RCC.LPUART1Freq_Value=160000000
+RCC.LSCOPinFreq_Value=32000
+RCC.LSE_VALUE=32768
+RCC.LSIDIV_VALUE=32000
+RCC.LSI_VALUE=32000
+RCC.MCO1PinFreq_Value=160000000
+RCC.MDF1Freq_Value=160000000
+RCC.MSIClockRange=RCC_MSIRANGE_0
+RCC.MSI_VALUE=48000000
+RCC.OCTOSPIMFreq_Value=160000000
+RCC.PLL1P=8
+RCC.PLL2FRACN=0
+RCC.PLL2PoutputFreq_Value=3096000000
+RCC.PLL2QoutputFreq_Value=3096000000
+RCC.PLL2RoutputFreq_Value=3096000000
+RCC.PLL3FRACN=0
+RCC.PLL3PoutputFreq_Value=3096000000
+RCC.PLL3QoutputFreq_Value=3096000000
+RCC.PLL3RoutputFreq_Value=3096000000
+RCC.PLLFRACN=0
+RCC.PLLN=20
+RCC.PLLPoutputFreq_Value=40000000
+RCC.PLLQoutputFreq_Value=160000000
+RCC.PLLRCLKFreq_Value=160000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+RCC.RNGFreq_Value=48000000
+RCC.SAESFreq_Value=48000000
+RCC.SAI1Freq_Value=3096000000
+RCC.SAI2Freq_Value=3096000000
+RCC.SDMMCFreq_Value=40000000
+RCC.SPI1Freq_Value=160000000
+RCC.SPI2Freq_Value=160000000
+RCC.SPI3Freq_Value=160000000
+RCC.SYSCLKFreq_VALUE=160000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.UART4Freq_Value=160000000
+RCC.UART5Freq_Value=160000000
+RCC.USART1Freq_Value=160000000
+RCC.USART2Freq_Value=160000000
+RCC.USART3Freq_Value=160000000
+RCC.USART6Freq_Value=160000000
+RCC.USBPHYCLockSelection=RCC_USBPHYCLKSOURCE_HSE
+RCC.USBPHYFreq_Value=16000000
+RCC.VCOInput2Freq_Value=48000000
+RCC.VCOInput3Freq_Value=48000000
+RCC.VCOInputFreq_Value=16000000
+RCC.VCOOutputFreq_Value=320000000
+RCC.VCOPLL2OutputFreq_Value=6192000000
+RCC.VCOPLL3OutputFreq_Value=6192000000
+USART1.IPParameters=VirtualMode-Asynchronous
+USART1.VirtualMode-Asynchronous=VM_ASYNC
+USBX.BSP.number=1
+USBX.Core_System=1
+USBX.IPParameters=Core_System,UX_Device_CoreStack,UX_Device_Controller,UX_DEVICE_CDC_ACM,USBD_CDCACM_EPIN_ADDR,USBD_CDCACM_EPOUT_HS_MPS,USBD_CDCACM_EPIN_HS_MPS,UX_DEVICE_APP_MEM_POOL_SIZE,USBD_PRODUCT_STRING,UX_SLAVE_REQUEST_DATA_MAX_LENGTH,USBX_DEVICE_SYS_SIZE,USBD_PID,USBD_SERIAL_NUMBER,UX_SLAVE_REQUEST_CONTROL_MAX_LENGTH,USBD_CDCACM_EPINCMD_ADDR,MAX_POWER_IN_MILLI_AMPER
+USBX.MAX_POWER_IN_MILLI_AMPER=0
+USBX.USBD_CDCACM_EPINCMD_ADDR=2
+USBX.USBD_CDCACM_EPIN_ADDR=1
+USBX.USBD_CDCACM_EPIN_HS_MPS=512
+USBX.USBD_CDCACM_EPOUT_HS_MPS=512
+USBX.USBD_PID=22336
+USBX.USBD_PRODUCT_STRING=STM32 Virtual ComPort
+USBX.USBD_SERIAL_NUMBER=CDC_ACM001
+USBX.USBX_DEVICE_SYS_SIZE=4*1024
+USBX.UX_DEVICE_APP_MEM_POOL_SIZE=8192
+USBX.UX_DEVICE_CDC_ACM=1
+USBX.UX_Device_Controller=1
+USBX.UX_Device_CoreStack=1
+USBX.UX_SLAVE_REQUEST_CONTROL_MAX_LENGTH=256
+USBX.UX_SLAVE_REQUEST_DATA_MAX_LENGTH=512
+USBX0.BSP.STBoard=false
+USBX0.BSP.api=Unknown
+USBX0.BSP.component=
+USBX0.BSP.condition=
+USBX0.BSP.instance=USB_OTG_HS
+USBX0.BSP.ip=USB_OTG_HS
+USBX0.BSP.mode=Device_Only
+USBX0.BSP.name=USBDevice
+USBX0.BSP.semaphore=
+USBX0.BSP.solution=USB_OTG_HS
+USB_OTG_HS.IPParameters=VirtualMode
+USB_OTG_HS.VirtualMode=Device_HS
+VP_GPDMA1_VS_GPDMACH0.Mode=SIMPLEREQUEST_GPDMACH0
+VP_GPDMA1_VS_GPDMACH0.Signal=GPDMA1_VS_GPDMACH0
+VP_GPDMA1_VS_GPDMACH3.Mode=SIMPLEREQUEST_GPDMACH3
+VP_GPDMA1_VS_GPDMACH3.Signal=GPDMA1_VS_GPDMACH3
+VP_GPDMA1_VS_GPDMACH5.Mode=SIMPLEREQUEST_GPDMACH5
+VP_GPDMA1_VS_GPDMACH5.Signal=GPDMA1_VS_GPDMACH5
+VP_ICACHE_VS_ICACHE.Mode=DirectMappedCache
+VP_ICACHE_VS_ICACHE.Signal=ICACHE_VS_ICACHE
+VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg
+VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP
+VP_PWR_VS_DBSignals.Mode=DisableDeadBatterySignals
+VP_PWR_VS_DBSignals.Signal=PWR_VS_DBSignals
+VP_PWR_VS_LPOM.Mode=PowerOptimisation
+VP_PWR_VS_LPOM.Signal=PWR_VS_LPOM
+VP_PWR_VS_SECSignals.Mode=Security/Privilege
+VP_PWR_VS_SECSignals.Signal=PWR_VS_SECSignals
+VP_SYS_VS_tim6.Mode=TIM6
+VP_SYS_VS_tim6.Signal=SYS_VS_tim6
+VP_THREADX_VS_RTOSJjThreadXJjCoreJjDefault.Mode=Core_Default
+VP_THREADX_VS_RTOSJjThreadXJjCoreJjDefault.Signal=THREADX_VS_RTOSJjThreadXJjCoreJjDefault
+VP_USBPD_VS_PD3TYPEC.Mode=PD3_TypeC
+VP_USBPD_VS_PD3TYPEC.Signal=USBPD_VS_PD3TYPEC
+VP_USBPD_VS_USBPD1.Mode=USBPD_P0
+VP_USBPD_VS_USBPD1.Signal=USBPD_VS_USBPD1
+VP_USBPD_VS_usbpd_tim2.Mode=TIM2
+VP_USBPD_VS_usbpd_tim2.Signal=USBPD_VS_usbpd_tim2
+VP_USBPD_VS_usbpd_usb_cohabitation.Mode=Enable USB Support
+VP_USBPD_VS_usbpd_usb_cohabitation.Signal=USBPD_VS_usbpd_usb_cohabitation
+VP_USBX_Core_System.Mode=Core_System
+VP_USBX_Core_System.Signal=USBX_Core_System
+VP_USBX_UX\ Device\ CDC\ ACM\ Class_HS.Mode=UX_Device_class_CDC_ACM_HS
+VP_USBX_UX\ Device\ CDC\ ACM\ Class_HS.Signal=USBX_UX Device CDC ACM Class_HS
+VP_USBX_UX\ Device\ Controller_HS.Mode=UX_Device_Controller_HS
+VP_USBX_UX\ Device\ Controller_HS.Signal=USBX_UX Device Controller_HS
+VP_USBX_UX\ Device\ CoreStack_HS.Mode=UX_Device_CoreStack_HS
+VP_USBX_UX\ Device\ CoreStack_HS.Signal=USBX_UX Device CoreStack_HS
+board=NUCLEO-U5A5ZJ-Q
+boardIOC=true
--- a/hw/bsp/stm32u5/family.c
+++ b/hw/bsp/stm32u5/family.c
@ -37,6 +37,9 @@
 #pragma GCC diagnostic pop
 #endif

+static void Error_Handler(void) {
+}
+
 #include "bsp/board_api.h"
 #include "board.h"

@ -47,6 +50,10 @@ void OTG_FS_IRQHandler(void) {
  tud_int_handler(0);
 }

+void OTG_HS_IRQHandler(void) {
+  tud_int_handler(0);
+}
+
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM
 //--------------------------------------------------------------------+
@ -54,8 +61,9 @@ void OTG_FS_IRQHandler(void) {
 UART_HandleTypeDef UartHandle;

 void board_init(void) {
-
-  board_clock_init();
+  // Init clock, implemented in board.h
+  SystemClock_Config();
+  SystemPower_Config();

  // Enable All GPIOs clocks
  __HAL_RCC_GPIOA_CLK_ENABLE();
@ -75,9 +83,6 @@ void board_init(void) {
 #if CFG_TUSB_OS == OPT_OS_NONE
  // 1ms tick timer
  SysTick_Config(SystemCoreClock / 1000);
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
 #endif

  GPIO_InitTypeDef GPIO_InitStruct;
@ -135,7 +140,13 @@ void board_init(void) {
  GPIO_InitStruct.Alternate = GPIO_AF10_USB;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

-#if defined(OTG_FS_VBUS_SENSE) && OTG_FS_VBUS_SENSE
+#ifdef USB_OTG_FS
+  #if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  #endif
+
+  #if defined(OTG_FS_VBUS_SENSE) && OTG_FS_VBUS_SENSE
  // Configure VBUS Pin OTG_FS_VBUS_SENSE
  GPIO_InitStruct.Pin = GPIO_PIN_9;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@ -144,20 +155,44 @@ void board_init(void) {

  // Enable VBUS sense (B device) via pin PA9
  USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
-#else
+  #else
  // Disable VBUS sense (B device) via pin PA9
  USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;

  // B-peripheral session valid override enable
  USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
  USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
-#endif // vbus sense
+  #endif // vbus sense

  /* Enable USB power on Pwrctrl CR2 register */
  HAL_PWREx_EnableVddUSB();

-  /* USB_OTG_FS clock enable */
+  /* USB clock enable */
  __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+#else
+  // STM59x/Ax/Fx/Gx only have 1 USB HS port
+
+  #if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  #endif
+
+
+  // Disable VBUS sense (B device)
+  USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
+
+  // B-peripheral session valid override enable
+  USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+  USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+
+  /* Enable USB power on Pwrctrl CR2 register */
+  HAL_PWREx_EnableVddUSB();
+
+  /* USB clock enable */
+  __HAL_RCC_USB_OTG_HS_CLK_ENABLE();
+#endif // USB_OTG_FS
+
+
 }

 //--------------------------------------------------------------------+
--- a/src/common/tusb_mcu.h
+++ b/src/common/tusb_mcu.h
@ -217,9 +217,7 @@

  // TypeC controller
  #define TUP_USBIP_TYPEC_STM32
-
  #define TUP_DCD_ENDPOINT_MAX    8
-
  #define TUP_TYPEC_RHPORTS_NUM 1

 #elif TU_CHECK_MCU(OPT_MCU_STM32G0)
@ -261,14 +259,21 @@
 #elif TU_CHECK_MCU(OPT_MCU_STM32U5)
  #define TUP_USBIP_DWC2
  #define TUP_USBIP_DWC2_STM32
-  #define TUP_DCD_ENDPOINT_MAX    6
+
+  // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY
+  #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \
+      defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx)
+    #define TUP_DCD_ENDPOINT_MAX  9
+    #define TUP_RHPORT_HIGHSPEED  1
+  #else
+    #define TUP_DCD_ENDPOINT_MAX  6
+  #endif

 #elif TU_CHECK_MCU(OPT_MCU_STM32L5)
  #define TUP_USBIP_FSDEV
  #define TUP_USBIP_FSDEV_STM32
  #define TUP_DCD_ENDPOINT_MAX    8

-
 //--------------------------------------------------------------------+
 // Sony
 //--------------------------------------------------------------------+
--- a/src/portable/synopsys/dwc2/dwc2_stm32.h
+++ b/src/portable/synopsys/dwc2/dwc2_stm32.h
@ -86,18 +86,16 @@
  #include "stm32u5xx.h"
  // NOTE: STM595/5A5/599/5A9 only have 1 USB port (with integrated HS PHY)
  // USB_OTG_FS_BASE and OTG_FS_IRQn not defined
-  #if (! defined USB_OTG_FS)
+  #if !defined(USB_OTG_FS)
    #define USB_OTG_HS_PERIPH_BASE    USB_OTG_HS_BASE
    #define EP_MAX_HS                 9
    #define EP_FIFO_SIZE_HS           4096
-    #define USB_OTG_FS_PERIPH_BASE    USB_OTG_HS_BASE
-    #define OTG_FS_IRQn               OTG_HS_IRQn
+    //#define OTG_FS_IRQn               OTG_HS_IRQn
  #else
    #define USB_OTG_FS_PERIPH_BASE    USB_OTG_FS_BASE
+    #define EP_MAX_FS       6
+    #define EP_FIFO_SIZE_FS 1280
  #endif
-  #define EP_MAX_FS       6
-  #define EP_FIFO_SIZE_FS 1280
-
 #else
  #error "Unsupported MCUs"
 #endif
--- a/src/tusb_option.h
+++ b/src/tusb_option.h
@ -174,10 +174,10 @@
 // NXP LPC MCX
 #define OPT_MCU_MCXN9            2300  ///< NXP MCX N9 Series

-// Helper to check if configured MCU is one of listed
+// Check if configured MCU is one of listed
 // Apply _TU_CHECK_MCU with || as separator to list of input
-#define _TU_CHECK_MCU(_m)   (CFG_TUSB_MCU == _m)
-#define TU_CHECK_MCU(...)   (TU_ARGS_APPLY(_TU_CHECK_MCU, ||, __VA_ARGS__))
+#define _TU_CHECK_MCU(_m)    (CFG_TUSB_MCU == _m)
+#define TU_CHECK_MCU(...)    (TU_ARGS_APPLY(_TU_CHECK_MCU, ||, __VA_ARGS__))

 //--------------------------------------------------------------------+
 // Supported OS
--- a/tools/get_deps.py
+++ b/tools/get_deps.py
@ -181,6 +181,10 @@ deps_all = {**deps_mandatory, **deps_optional}
 TOP = Path(__file__).parent.parent.resolve()


+def run_cmd(cmd):
+    return subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+
+
 def get_a_dep(d):
    if d not in deps_all.keys():
        print('{} is not found in dependency list')
@ -189,25 +193,24 @@ def get_a_dep(d):
    commit = deps_all[d][1]
    families = deps_all[d][2]

-    print('cloning {} with {}'.format(d, url))
+    print(f'cloning {d} with {url}')

    p = Path(TOP / d)
-    git_cmd = "git -C {}".format(p)
+    git_cmd = f"git -C {p}"

    # Init git deps if not existed
    if not p.exists():
        p.mkdir(parents=True)
-        subprocess.run("{} init".format(git_cmd), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
-        subprocess.run("{} remote add origin {}".format(git_cmd, url), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+        run_cmd(f"git -C {p} init")
+        run_cmd(f"git -C {p} remote add origin {url}")

    # Check if commit is already fetched
-    result = subprocess.run("{} rev-parse HEAD".format(git_cmd, commit), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+    result = run_cmd(f"git -C {p} rev-parse HEAD")
    head = result.stdout.decode("utf-8").splitlines()[0]
-
+    run_cmd(f"git -C {p} reset --hard")
    if commit != head:
-        subprocess.run("{} reset --hard".format(git_cmd, commit), shell=True)
-        subprocess.run("{} fetch --depth 1 origin {}".format(git_cmd, commit), shell=True)
-        subprocess.run("{} checkout FETCH_HEAD".format(git_cmd), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+        run_cmd(f"git -C {p} fetch --depth 1 origin {commit}")
+        run_cmd(f"git -C {p} checkout FETCH_HEAD")

    return 0