- add esp32 c3, c6 mcu option

- skip breakpoint for espressif riscv
This commit is contained in:
hathach 2024-04-26 00:10:57 +07:00
parent 03ccc8d8df
commit 223ce56625
No known key found for this signature in database
GPG Key ID: 26FAB84F615C3C52
5 changed files with 11 additions and 4 deletions

View File

@ -126,7 +126,10 @@ static void usb_host_task(void *param) {
(void) param;
// init host stack on configured roothub port
tuh_init(BOARD_TUH_RHPORT);
if (!tuh_init(BOARD_TUH_RHPORT)) {
printf("Failed to init USB Host Stack\r\n");
vTaskSuspend(NULL);
}
if (board_init_after_tusb) {
board_init_after_tusb();

View File

@ -429,8 +429,8 @@
#define TUP_MCU_MULTIPLE_CORE 0
#endif
#if !defined(TUP_DCD_ENDPOINT_MAX)
#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8"
#if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED
#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8"
#define TUP_DCD_ENDPOINT_MAX 8
#endif

View File

@ -84,7 +84,7 @@
if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \
} while(0)
#elif defined(__riscv)
#elif defined(__riscv) && !TUP_MCU_ESPRESSIF
#define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0)
#elif defined(_mips)

View File

@ -479,6 +479,8 @@ bool hcd_init(uint8_t rhport) {
_hcd_data.spi_mutex = osal_mutex_create(&_hcd_data.spi_mutexdef);
#endif
// NOTE: driver does not seem to work without nRST pin signal
// full duplex, interrupt negative edge
reg_write(rhport, PINCTL_ADDR, _tuh_cfg.pinctl | PINCTL_FDUPSPI, false);

View File

@ -120,6 +120,8 @@
#define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2
#define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3
#define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e)
#define OPT_MCU_ESP32C3 903 ///< Espressif ESP32-C3
#define OPT_MCU_ESP32C6 904 ///< Espressif ESP32-C6
#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU
// Dialog