diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index 5c63ec0c0..38db6c6cc 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -8,3 +8,4 @@ family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY family_add_subdirectory(cdc_msc_hid) family_add_subdirectory(hid_controller) +family_add_subdirectory(libusb_api) diff --git a/examples/host/libusb_api/CMakeLists.txt b/examples/host/libusb_api/CMakeLists.txt new file mode 100644 index 000000000..bff281a8c --- /dev/null +++ b/examples/host/libusb_api/CMakeLists.txt @@ -0,0 +1,27 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT}) \ No newline at end of file diff --git a/examples/host/libusb_api/Makefile b/examples/host/libusb_api/Makefile new file mode 100644 index 000000000..c59369ffa --- /dev/null +++ b/examples/host/libusb_api/Makefile @@ -0,0 +1,28 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/main.c + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# TODO: suppress warning caused by host stack +CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference + +# TinyUSB Host Stack source +SRC_C += \ + src/class/cdc/cdc_host.c \ + src/class/hid/hid_host.c \ + src/class/msc/msc_host.c \ + src/host/hub.c \ + src/host/usbh.c \ + src/host/usbh_control.c \ + src/portable/ohci/ohci.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c + +include ../../rules.mk diff --git a/examples/host/libusb_api/only.txt b/examples/host/libusb_api/only.txt new file mode 100644 index 000000000..7fe4e3f5c --- /dev/null +++ b/examples/host/libusb_api/only.txt @@ -0,0 +1,9 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT10XX +mcu:RP2040 +mcu:MSP432E4 +mcu:RX65X diff --git a/examples/host/libusb_api/src/main.c b/examples/host/libusb_api/src/main.c new file mode 100644 index 000000000..810f8e762 --- /dev/null +++ b/examples/host/libusb_api/src/main.c @@ -0,0 +1,98 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* This example current worked and tested with following controller + * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc + */ + + +#include +#include +#include + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +void led_blinking_task(void); + +extern void cdc_task(void); +extern void hid_app_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + printf("TinyUSB Host HID Controller Example\r\n"); + printf("Note: Events only displayed for explictly supported controllers\r\n"); + + tusb_init(); + + while (1) + { + // tinyusb host task + tuh_task(); + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted (configured) +void tuh_mount_cb (uint8_t dev_addr) +{ + printf("Device attached, address = %d\r\n", dev_addr); +} + +/// Invoked when device is unmounted (bus reset/unplugged) +void tuh_umount_cb(uint8_t dev_addr) +{ + printf("Device removed, address = %d\r\n", dev_addr); +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + const uint32_t interval_ms = 1000; + static uint32_t start_ms = 0; + + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/host/libusb_api/src/tusb_config.h b/examples/host/libusb_api/src/tusb_config.h new file mode 100644 index 000000000..234eca402 --- /dev/null +++ b/examples/host/libusb_api/src/tusb_config.h @@ -0,0 +1,94 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED) +#else + #define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +// only hub class is enabled +#define CFG_TUH_HUB 1 + +// max device support (excluding hub device) +// 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) + +#define CFG_TUH_ENDPOINT_MAX 8 + +//------------- HID -------------// + +#define CFG_TUH_HID_EP_BUFSIZE 64 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */