mbedtls/include/mbedtls/poly1305.h
Gilles Peskine d297157fe8 Move MBEDTLS_ERR_xxx Doxygen comments before the definition
Now that descriptions of error codes no longer have to be on the same line
for the sake of generate_errors.pl, move them to their own line before the
definition. This aligns them with what we do for other definitions, and
means that we no longer need to have very long lines containing both the C
definition and the comment.

```
perl -i -pe 's~^(#define +MBEDTLS_ERR_\w+ +-\w+) */\*[*!]<(.*)\*/~/**$2*/\n$1~' include/mbedtls/*.h
```

This commit does not change the output of generate_errors.pl.

Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
2021-08-02 22:51:03 +02:00

182 lines
6.4 KiB
C

/**
* \file poly1305.h
*
* \brief This file contains Poly1305 definitions and functions.
*
* Poly1305 is a one-time message authenticator that can be used to
* authenticate messages. Poly1305-AES was created by Daniel
* Bernstein https://cr.yp.to/mac/poly1305-20050329.pdf The generic
* Poly1305 algorithm (not tied to AES) was also standardized in RFC
* 7539.
*
* \author Daniel King <damaki.gh@gmail.com>
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBEDTLS_POLY1305_H
#define MBEDTLS_POLY1305_H
#include "mbedtls/private_access.h"
#include "mbedtls/build_info.h"
#include <stdint.h>
#include <stddef.h>
/** Invalid input parameter(s). */
#define MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA -0x0057
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(MBEDTLS_POLY1305_ALT)
typedef struct mbedtls_poly1305_context
{
uint32_t MBEDTLS_PRIVATE(r)[4]; /** The value for 'r' (low 128 bits of the key). */
uint32_t MBEDTLS_PRIVATE(s)[4]; /** The value for 's' (high 128 bits of the key). */
uint32_t MBEDTLS_PRIVATE(acc)[5]; /** The accumulator number. */
uint8_t MBEDTLS_PRIVATE(queue)[16]; /** The current partial block of data. */
size_t MBEDTLS_PRIVATE(queue_len); /** The number of bytes stored in 'queue'. */
}
mbedtls_poly1305_context;
#else /* MBEDTLS_POLY1305_ALT */
#include "poly1305_alt.h"
#endif /* MBEDTLS_POLY1305_ALT */
/**
* \brief This function initializes the specified Poly1305 context.
*
* It must be the first API called before using
* the context.
*
* It is usually followed by a call to
* \c mbedtls_poly1305_starts(), then one or more calls to
* \c mbedtls_poly1305_update(), then one call to
* \c mbedtls_poly1305_finish(), then finally
* \c mbedtls_poly1305_free().
*
* \param ctx The Poly1305 context to initialize. This must
* not be \c NULL.
*/
void mbedtls_poly1305_init( mbedtls_poly1305_context *ctx );
/**
* \brief This function releases and clears the specified
* Poly1305 context.
*
* \param ctx The Poly1305 context to clear. This may be \c NULL, in which
* case this function is a no-op. If it is not \c NULL, it must
* point to an initialized Poly1305 context.
*/
void mbedtls_poly1305_free( mbedtls_poly1305_context *ctx );
/**
* \brief This function sets the one-time authentication key.
*
* \warning The key must be unique and unpredictable for each
* invocation of Poly1305.
*
* \param ctx The Poly1305 context to which the key should be bound.
* This must be initialized.
* \param key The buffer containing the \c 32 Byte (\c 256 Bit) key.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_starts( mbedtls_poly1305_context *ctx,
const unsigned char key[32] );
/**
* \brief This functions feeds an input buffer into an ongoing
* Poly1305 computation.
*
* It is called between \c mbedtls_cipher_poly1305_starts() and
* \c mbedtls_cipher_poly1305_finish().
* It can be called repeatedly to process a stream of data.
*
* \param ctx The Poly1305 context to use for the Poly1305 operation.
* This must be initialized and bound to a key.
* \param ilen The length of the input data in Bytes.
* Any value is accepted.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `ilen == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_update( mbedtls_poly1305_context *ctx,
const unsigned char *input,
size_t ilen );
/**
* \brief This function generates the Poly1305 Message
* Authentication Code (MAC).
*
* \param ctx The Poly1305 context to use for the Poly1305 operation.
* This must be initialized and bound to a key.
* \param mac The buffer to where the MAC is written. This must
* be a writable buffer of length \c 16 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_finish( mbedtls_poly1305_context *ctx,
unsigned char mac[16] );
/**
* \brief This function calculates the Poly1305 MAC of the input
* buffer with the provided key.
*
* \warning The key must be unique and unpredictable for each
* invocation of Poly1305.
*
* \param key The buffer containing the \c 32 Byte (\c 256 Bit) key.
* \param ilen The length of the input data in Bytes.
* Any value is accepted.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `ilen == 0`.
* \param mac The buffer to where the MAC is written. This must be
* a writable buffer of length \c 16 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_mac( const unsigned char key[32],
const unsigned char *input,
size_t ilen,
unsigned char mac[16] );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The Poly1305 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_poly1305_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_POLY1305_H */