# components.sh # # Copyright The Mbed TLS Contributors # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later # This file contains the test components that are executed by all.sh # The functions below are named as follows: # * component_XXX: independent components. They can be run in any order. # * component_check_XXX: quick tests that aren't worth parallelizing. # * component_build_XXX: build things but don't run them. # * component_test_XXX: build and test. # * component_release_XXX: tests that the CI should skip during PR testing. # * support_XXX: if support_XXX exists and returns false then # component_XXX is not run by default. # Each component must start by invoking `msg` with a short informative message. # # Warning: due to the way bash detects errors, the failure of a command # inside 'if' or '!' is not detected. Use the 'not' function instead of '!'. # # Each component is executed in a separate shell process. The component # fails if any command in it returns a non-zero status. # # The framework in all.sh performs some cleanup tasks after each component. # This means that components can assume that the working directory is in a # cleaned-up state, and don't need to perform the cleanup themselves. # * Run `make clean`. # * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running # the component. # * Check out `Makefile`, `library/Makefile`, `programs/Makefile`, # `tests/Makefile` and `programs/fuzz/Makefile` from git. # This cleans up after an in-tree use of CMake. # # The tests are roughly in order from fastest to slowest. This doesn't # have to be exact, but in general you should add slower tests towards # the end and fast checks near the beginning. ################################################################ #### Build and test many configurations and targets ################################################################ ################################################################ #### Basic checks ################################################################ # # Test Suites to be executed # # The test ordering tries to optimize for the following criteria: # 1. Catch possible problems early, by running first tests that run quickly # and/or are more likely to fail than others (eg I use Clang most of the # time, so start with a GCC build). # 2. Minimize total running time, by avoiding useless rebuilds # # Indicative running times are given for reference. ################################################################ #### Build and test many configurations and targets ################################################################ component_test_default_out_of_box () { msg "build: make, default config (out-of-box)" # ~1min make # Disable fancy stuff unset MBEDTLS_TEST_OUTCOME_FILE msg "test: main suites make, default config (out-of-box)" # ~10s make test msg "selftest: make, default config (out-of-box)" # ~10s programs/test/selftest msg "program demos: make, default config (out-of-box)" # ~10s tests/scripts/run_demos.py } component_test_default_cmake_gcc_asan () { msg "build: cmake, gcc, ASan" # ~ 1 min 50s CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "program demos (ASan build)" # ~10s tests/scripts/run_demos.py msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: metatests (GCC, ASan build)" tests/scripts/run-metatests.sh any asan poison msg "test: ssl-opt.sh (ASan build)" # ~ 1 min tests/ssl-opt.sh msg "test: compat.sh (ASan build)" # ~ 6 min tests/compat.sh msg "test: context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_default_cmake_gcc_asan_new_bignum () { msg "build: cmake, gcc, ASan" # ~ 1 min 50s scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (ASan build)" # ~ 1 min tests/ssl-opt.sh msg "test: compat.sh (ASan build)" # ~ 6 min tests/compat.sh msg "test: context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_full_cmake_gcc_asan () { msg "build: full config, cmake, gcc, ASan" scripts/config.py full CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (full config, ASan build)" make test msg "test: selftest (full config, ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (full config, ASan build)" tests/ssl-opt.sh # Note: the next two invocations cover all compat.sh test cases. # We should use the same here and in basic-build-test.sh. msg "test: compat.sh: default version (full config, ASan build)" tests/compat.sh -e 'ARIA\|CHACHA' msg "test: compat.sh: next: ARIA, Chacha (full config, ASan build)" env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec tests/context-info.sh } component_test_full_cmake_gcc_asan_new_bignum () { msg "build: full config, cmake, gcc, ASan" scripts/config.py full scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (full config, new bignum, ASan)" make test msg "test: selftest (full config, new bignum, ASan)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (full config, new bignum, ASan)" tests/ssl-opt.sh # Note: the next two invocations cover all compat.sh test cases. # We should use the same here and in basic-build-test.sh. msg "test: compat.sh: default version (full config, new bignum, ASan)" tests/compat.sh -e 'ARIA\|CHACHA' msg "test: compat.sh: next: ARIA, Chacha (full config, new bignum, ASan)" env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' msg "test: context-info.sh (full config, new bignum, ASan)" # ~ 15 sec tests/context-info.sh } component_test_psa_crypto_key_id_encodes_owner () { msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan" make test } component_test_psa_assume_exclusive_buffers () { msg "build: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan" scripts/config.py full scripts/config.py set MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full config + MBEDTLS_PSA_ASSUME_EXCLUSIVE_BUFFERS, cmake, gcc, ASan" make test } # check_renamed_symbols HEADER LIB # Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol # name is LIB. check_renamed_symbols () { ! nm "$2" | sed 's/.* //' | grep -x -F "$(sed -n 's/^ *# *define *\([A-Z_a-z][0-9A-Z_a-z]*\)..*/\1/p' "$1")" } component_build_psa_crypto_spm () { msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER + PSA_CRYPTO_SPM, make, gcc" scripts/config.py full scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER scripts/config.py set MBEDTLS_PSA_CRYPTO_SPM # We can only compile, not link, since our test and sample programs # aren't equipped for the modified names used when MBEDTLS_PSA_CRYPTO_SPM # is active. make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' lib # Check that if a symbol is renamed by crypto_spe.h, the non-renamed # version is not present. echo "Checking for renamed symbols in the library" check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a } # Get a list of library-wise undefined symbols and ensure that they only # belong to psa_xxx() functions and not to mbedtls_yyy() ones. # This function is a common helper used by both: # - component_test_default_psa_crypto_client_without_crypto_provider # - component_build_full_psa_crypto_client_without_crypto_provider. common_check_mbedtls_missing_symbols () { nm library/libmbedcrypto.a | grep ' [TRrDC] ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_def.txt nm library/libmbedcrypto.a | grep ' U ' | grep -Eo '(mbedtls_|psa_).*' | sort -u > sym_undef.txt comm sym_def.txt sym_undef.txt -13 > linking_errors.txt not grep mbedtls_ linking_errors.txt rm sym_def.txt sym_undef.txt linking_errors.txt } component_test_default_psa_crypto_client_without_crypto_provider () { msg "build: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT" scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py set MBEDTLS_PSA_CRYPTO_CLIENT scripts/config.py unset MBEDTLS_LMS_C make msg "check missing symbols: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT" common_check_mbedtls_missing_symbols msg "test: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT" make test } component_build_full_psa_crypto_client_without_crypto_provider () { msg "build: full config - PSA_CRYPTO_C" # Use full config which includes USE_PSA and CRYPTO_CLIENT. scripts/config.py full scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # Dynamic secure element support is a deprecated feature and it is not # available when CRYPTO_C and PSA_CRYPTO_STORAGE_C are disabled. scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C # Since there is no crypto provider in this build it is not possible to # build all the test executables and progrems due to missing PSA functions # at link time. Therefore we will just build libraries and we'll check # that symbols of interest are there. make lib msg "check missing symbols: full config - PSA_CRYPTO_C" common_check_mbedtls_missing_symbols # Ensure that desired functions are included into the build (extend the # following list as required). grep mbedtls_pk_get_psa_attributes library/libmbedcrypto.a grep mbedtls_pk_import_into_psa library/libmbedcrypto.a grep mbedtls_pk_copy_from_psa library/libmbedcrypto.a } component_test_psa_crypto_rsa_no_genprime () { msg "build: default config minus MBEDTLS_GENPRIME" scripts/config.py unset MBEDTLS_GENPRIME make msg "test: default config minus MBEDTLS_GENPRIME" make test } component_test_ref_configs () { msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s # test-ref-configs works by overwriting mbedtls_config.h; this makes cmake # want to re-generate generated files that depend on it, quite correctly. # However this doesn't work as the generation script expects a specific # format for mbedtls_config.h, which the other files don't follow. Also, # cmake can't know this, but re-generation is actually not necessary as # the generated files only depend on the list of available options, not # whether they're on or off. So, disable cmake's (over-sensitive here) # dependency resolution for generated files and just rely on them being # present (thanks to pre_generate_files) by turning GEN_FILES off. CC=$ASAN_CC cmake -D GEN_FILES=Off -D CMAKE_BUILD_TYPE:String=Asan . tests/scripts/test-ref-configs.pl } component_test_no_renegotiation () { msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh } component_test_no_pem_no_fs () { msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)" scripts/config.py unset MBEDTLS_PEM_PARSE_C scripts/config.py unset MBEDTLS_FS_IO scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # requires a filesystem scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA ITS CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh } component_test_rsa_no_crt () { msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_RSA_NO_CRT CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f RSA msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min tests/compat.sh -t RSA msg "test: RSA_NO_CRT - RSA-related part of context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_no_ctr_drbg_classic () { msg "build: Full minus CTR_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus CTR_DRBG, classic crypto - main suites" make test # In this configuration, the TLS test programs use HMAC_DRBG. # The SSL tests are slow, so run a small subset, just enough to get # confidence that the SSL code copes with HMAC_DRBG. msg "test: Full minus CTR_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server' msg "test: Full minus CTR_DRBG, classic crypto - compat.sh (subset)" tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL } component_test_no_ctr_drbg_use_psa () { msg "build: Full minus CTR_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py set MBEDTLS_USE_PSA_CRYPTO CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - main suites" make test # In this configuration, the TLS test programs use HMAC_DRBG. # The SSL tests are slow, so run a small subset, just enough to get # confidence that the SSL code copes with HMAC_DRBG. msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server' msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - compat.sh (subset)" tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL } component_test_no_hmac_drbg_classic () { msg "build: Full minus HMAC_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus HMAC_DRBG, classic crypto - main suites" make test # Normally our ECDSA implementation uses deterministic ECDSA. But since # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used # instead. # Test SSL with non-deterministic ECDSA. Only test features that # might be affected by how ECDSA signature is performed. msg "test: Full minus HMAC_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private: sign' # To save time, only test one protocol version, since this part of # the protocol is identical in (D)TLS up to 1.2. msg "test: Full minus HMAC_DRBG, classic crypto - compat.sh (ECDSA)" tests/compat.sh -m tls12 -t 'ECDSA' } component_test_no_hmac_drbg_use_psa () { msg "build: Full minus HMAC_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py set MBEDTLS_USE_PSA_CRYPTO CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - main suites" make test # Normally our ECDSA implementation uses deterministic ECDSA. But since # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used # instead. # Test SSL with non-deterministic ECDSA. Only test features that # might be affected by how ECDSA signature is performed. msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private: sign' # To save time, only test one protocol version, since this part of # the protocol is identical in (D)TLS up to 1.2. msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - compat.sh (ECDSA)" tests/compat.sh -m tls12 -t 'ECDSA' } component_test_psa_external_rng_no_drbg_classic () { msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py unset MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG # When MBEDTLS_USE_PSA_CRYPTO is disabled and there is no DRBG, # the SSL test programs don't have an RNG and can't work. Explicitly # make them use the PSA RNG with -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG. make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG" LDFLAGS="$ASAN_CFLAGS" msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - main suites" make test msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default' } component_test_psa_external_rng_no_drbg_use_psa () { msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py unset MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - main suites" make test msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|opaque' } component_test_psa_external_rng_use_psa_crypto () { msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py set MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_CTR_DRBG_C make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" make test msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" tests/ssl-opt.sh -f 'Default\|opaque' } component_test_psa_inject_entropy () { msg "build: full + MBEDTLS_PSA_INJECT_ENTROPY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_INJECT_ENTROPY scripts/config.py set MBEDTLS_ENTROPY_NV_SEED scripts/config.py set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_READ scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_WRITE make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" LDFLAGS="$ASAN_CFLAGS" msg "test: full + MBEDTLS_PSA_INJECT_ENTROPY" make test } component_test_sw_inet_pton () { msg "build: default plus MBEDTLS_TEST_SW_INET_PTON" # MBEDTLS_TEST_HOOKS required for x509_crt_parse_cn_inet_pton scripts/config.py set MBEDTLS_TEST_HOOKS make CFLAGS="-DMBEDTLS_TEST_SW_INET_PTON" msg "test: default plus MBEDTLS_TEST_SW_INET_PTON" make test } component_full_no_pkparse_pkwrite () { msg "build: full without pkparse and pkwrite" scripts/config.py crypto_full scripts/config.py unset MBEDTLS_PK_PARSE_C scripts/config.py unset MBEDTLS_PK_WRITE_C make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" # Ensure that PK_[PARSE|WRITE]_C were not re-enabled accidentally (additive config). not grep mbedtls_pk_parse_key library/pkparse.o not grep mbedtls_pk_write_key_der library/pkwrite.o msg "test: full without pkparse and pkwrite" make test } component_test_crypto_full_md_light_only () { msg "build: crypto_full with only the light subset of MD" scripts/config.py crypto_full scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG # Disable MD scripts/config.py unset MBEDTLS_MD_C # Disable direct dependencies of MD_C scripts/config.py unset MBEDTLS_HKDF_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_PKCS7_C # Disable indirect dependencies of MD_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # needs HMAC_DRBG # Disable things that would auto-enable MD_C scripts/config.py unset MBEDTLS_PKCS5_C # Note: MD-light is auto-enabled in build_info.h by modules that need it, # which we haven't disabled, so no need to explicitly enable it. make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" # Make sure we don't have the HMAC functions, but the hashing functions not grep mbedtls_md_hmac library/md.o grep mbedtls_md library/md.o msg "test: crypto_full with only the light subset of MD" make test } component_test_full_no_cipher_no_psa_crypto () { msg "build: full no CIPHER no PSA_CRYPTO_C" scripts/config.py full scripts/config.py unset MBEDTLS_CIPHER_C # Don't pull in cipher via PSA mechanisms # (currently ignored anyway because we completely disable PSA) scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG # Disable features that depend on CIPHER_C scripts/config.py unset MBEDTLS_CMAC_C scripts/config.py unset MBEDTLS_NIST_KW_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT scripts/config.py unset MBEDTLS_SSL_TLS_C scripts/config.py unset MBEDTLS_SSL_TICKET_C # Disable features that depend on PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE msg "test: full no CIPHER no PSA_CRYPTO_C" make test } # This is a common configurator and test function that is used in: # - component_test_full_no_cipher_with_psa_crypto # - component_test_full_no_cipher_with_psa_crypto_config # It accepts 2 input parameters: # - $1: boolean value which basically reflects status of MBEDTLS_PSA_CRYPTO_CONFIG # - $2: a text string which describes the test component common_test_full_no_cipher_with_psa_crypto () { USE_CRYPTO_CONFIG="$1" COMPONENT_DESCRIPTION="$2" msg "build: $COMPONENT_DESCRIPTION" scripts/config.py full scripts/config.py unset MBEDTLS_CIPHER_C if [ "$USE_CRYPTO_CONFIG" -eq 1 ]; then # The built-in implementation of the following algs/key-types depends # on CIPHER_C so we disable them. # This does not hold for KEY_TYPE_CHACHA20 and ALG_CHACHA20_POLY1305 # so we keep them enabled. scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CCM_STAR_NO_TAG scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CMAC scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_NO_PADDING scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CBC_PKCS7 scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CFB scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_CTR scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_ECB_NO_PADDING scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_OFB scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128 scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f $CRYPTO_CONFIG_H unset PSA_WANT_KEY_TYPE_DES else # Don't pull in cipher via PSA mechanisms scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG # Disable cipher modes/keys that make PSA depend on CIPHER_C. # Keep CHACHA20 and CHACHAPOLY enabled since they do not depend on CIPHER_C. scripts/config.py unset-all MBEDTLS_CIPHER_MODE fi # The following modules directly depends on CIPHER_C scripts/config.py unset MBEDTLS_CMAC_C scripts/config.py unset MBEDTLS_NIST_KW_C make # Ensure that CIPHER_C was not re-enabled not grep mbedtls_cipher_init library/cipher.o msg "test: $COMPONENT_DESCRIPTION" make test } component_test_full_no_cipher_with_psa_crypto () { common_test_full_no_cipher_with_psa_crypto 0 "full no CIPHER no CRYPTO_CONFIG" } component_test_full_no_cipher_with_psa_crypto_config () { common_test_full_no_cipher_with_psa_crypto 1 "full no CIPHER" } component_test_full_no_ccm () { msg "build: full no PSA_WANT_ALG_CCM" # Full config enables: # - USE_PSA_CRYPTO so that TLS code dispatches cipher/AEAD to PSA # - CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated scripts/config.py full # Disable PSA_WANT_ALG_CCM so that CCM is not supported in PSA. CCM_C is still # enabled, but not used from TLS since USE_PSA is set. # This is helpful to ensure that TLS tests below have proper dependencies. # # Note: also PSA_WANT_ALG_CCM_STAR_NO_TAG is enabled, but it does not cause # PSA_WANT_ALG_CCM to be re-enabled. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM make msg "test: full no PSA_WANT_ALG_CCM" make test } component_test_full_no_ccm_star_no_tag () { msg "build: full no PSA_WANT_ALG_CCM_STAR_NO_TAG" # Full config enables CRYPTO_CONFIG so that PSA_WANT config symbols are evaluated scripts/config.py full # Disable CCM_STAR_NO_TAG, which is the target of this test, as well as all # other components that enable MBEDTLS_PSA_BUILTIN_CIPHER internal symbol. # This basically disables all unauthenticated ciphers on the PSA side, while # keeping AEADs enabled. # # Note: PSA_WANT_ALG_CCM is enabled, but it does not cause # PSA_WANT_ALG_CCM_STAR_NO_TAG to be re-enabled. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7 make # Ensure MBEDTLS_PSA_BUILTIN_CIPHER was not enabled not grep mbedtls_psa_cipher library/psa_crypto_cipher.o msg "test: full no PSA_WANT_ALG_CCM_STAR_NO_TAG" make test } component_test_full_no_bignum () { msg "build: full minus bignum" scripts/config.py full scripts/config.py unset MBEDTLS_BIGNUM_C # Direct dependencies of bignum scripts/config.py unset MBEDTLS_ECP_C scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_DHM_C # Direct dependencies of ECP scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # Disable what auto-enables ECP_LIGHT scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED # Indirect dependencies of ECP scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED # Direct dependencies of DHM scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED # Direct dependencies of RSA scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # PK and its dependencies scripts/config.py unset MBEDTLS_PK_C scripts/config.py unset MBEDTLS_PK_PARSE_C scripts/config.py unset MBEDTLS_PK_WRITE_C scripts/config.py unset MBEDTLS_X509_USE_C scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_CRL_PARSE_C scripts/config.py unset MBEDTLS_X509_CSR_PARSE_C scripts/config.py unset MBEDTLS_X509_CREATE_C scripts/config.py unset MBEDTLS_X509_CRT_WRITE_C scripts/config.py unset MBEDTLS_X509_CSR_WRITE_C scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_SSL_ASYNC_PRIVATE scripts/config.py unset MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK make msg "test: full minus bignum" make test } component_test_tls1_2_default_stream_cipher_only () { msg "build: default with only stream cipher" # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C #Disable TLS 1.3 (as no AEAD) scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only stream cipher" make test # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite. } component_test_tls1_2_default_stream_cipher_only_use_psa () { msg "build: default with only stream cipher use psa" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C #Disable TLS 1.3 (as no AEAD) scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only stream cipher use psa" make test # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite. } component_test_tls1_2_default_cbc_legacy_cipher_only () { msg "build: default with only CBC-legacy cipher" # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C #Disable TLS 1.3 (as no AEAD) scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy cipher" make test msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } component_test_tls1_2_deafult_cbc_legacy_cipher_only_use_psa () { msg "build: default with only CBC-legacy cipher use psa" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C #Disable TLS 1.3 (as no AEAD) scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy cipher use psa" make test msg "test: default with only CBC-legacy cipher use psa - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () { msg "build: default with only CBC-legacy and CBC-EtM ciphers" # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C #Disable TLS 1.3 (as no AEAD) scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy and CBC-EtM ciphers" make test msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only_use_psa () { msg "build: default with only CBC-legacy and CBC-EtM ciphers use psa" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C #Disable TLS 1.3 (as no AEAD) scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa" make test msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } # We're not aware of any other (open source) implementation of EC J-PAKE in TLS # that we could use for interop testing. However, we now have sort of two # implementations ourselves: one using PSA, the other not. At least test that # these two interoperate with each other. component_test_tls1_2_ecjpake_compatibility () { msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA" scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED # Explicitly make lib first to avoid a race condition: # https://github.com/Mbed-TLS/mbedtls/issues/8229 make lib make -C programs ssl/ssl_server2 ssl/ssl_client2 cp programs/ssl/ssl_server2 s2_no_use_psa cp programs/ssl/ssl_client2 c2_no_use_psa msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO make clean make lib make -C programs ssl/ssl_server2 ssl/ssl_client2 make -C programs test/udp_proxy test/query_compile_time_config msg "test: server w/o USE_PSA - client w/ USE_PSA, text password" P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS" msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password" P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS" msg "test: client w/o USE_PSA - server w/ USE_PSA, text password" P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS" msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password" P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS" rm s2_no_use_psa c2_no_use_psa } component_test_everest () { msg "build: Everest ECDH context (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED CC=clang cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: metatests (clang, ASan)" tests/scripts/run-metatests.sh any asan poison msg "test: Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA' } component_test_everest_curve25519_only () { msg "build: Everest ECDH context, only Curve25519" # ~ 6 min scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_ECJPAKE_C # Disable all curves scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED" scripts/config.py set MBEDTLS_ECP_DP_CURVE25519_ENABLED make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: Everest ECDH context, only Curve25519" # ~ 50s make test } component_test_small_ssl_out_content_len () { msg "build: small SSL_OUT_CONTENT_LEN (ASan build)" scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests" tests/ssl-opt.sh -f "Max fragment\|Large packet" } component_test_small_ssl_in_content_len () { msg "build: small SSL_IN_CONTENT_LEN (ASan build)" scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests" tests/ssl-opt.sh -f "Max fragment" } component_test_small_ssl_dtls_max_buffering () { msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0" scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test" tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg" } component_test_small_mbedtls_ssl_dtls_max_buffering () { msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1" scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test" tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket" } component_test_psa_collect_statuses () { msg "build+test: psa_collect_statuses" # ~30s scripts/config.py full tests/scripts/psa_collect_statuses.py # Check that psa_crypto_init() succeeded at least once grep -q '^0:psa_crypto_init:' tests/statuses.log rm -f tests/statuses.log } component_test_full_cmake_clang () { msg "build: cmake, full config, clang" # ~ 50s scripts/config.py full CC=clang CXX=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On -D TEST_CPP=1 . make msg "test: main suites (full config, clang)" # ~ 5s make test msg "test: cpp_dummy_build (full config, clang)" # ~ 1s programs/test/cpp_dummy_build msg "test: metatests (clang)" tests/scripts/run-metatests.sh any pthread msg "program demos (full config, clang)" # ~10s tests/scripts/run_demos.py msg "test: psa_constant_names (full config, clang)" # ~ 1s tests/scripts/test_psa_constant_names.py msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private' } skip_suites_without_constant_flow () { # Skip the test suites that don't have any constant-flow annotations. # This will need to be adjusted if we ever start declaring things as # secret from macros or functions inside tests/include or tests/src. SKIP_TEST_SUITES=$( git -C tests/suites grep -L TEST_CF_ 'test_suite_*.function' | sed 's/test_suite_//; s/\.function$//' | tr '\n' ,) export SKIP_TEST_SUITES } skip_all_except_given_suite () { # Skip all but the given test suite SKIP_TEST_SUITES=$( ls -1 tests/suites/test_suite_*.function | grep -v $1.function | sed 's/tests.suites.test_suite_//; s/\.function$//' | tr '\n' ,) export SKIP_TEST_SUITES } component_test_memsan_constant_flow () { # This tests both (1) accesses to undefined memory, and (2) branches or # memory access depending on secret values. To distinguish between those: # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist? # - or alternatively, change the build type to MemSanDbg, which enables # origin tracking and nicer stack traces (which are useful for debugging # anyway), and check if the origin was TEST_CF_SECRET() or something else. msg "build: cmake MSan (clang), full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO, Msan + constant flow)" make test } component_test_memsan_constant_flow_psa () { # This tests both (1) accesses to undefined memory, and (2) branches or # memory access depending on secret values. To distinguish between those: # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist? # - or alternatively, change the build type to MemSanDbg, which enables # origin tracking and nicer stack traces (which are useful for debugging # anyway), and check if the origin was TEST_CF_SECRET() or something else. msg "build: cmake MSan (clang), full config with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (Msan + constant flow)" make test } component_release_test_valgrind_constant_flow () { # This tests both (1) everything that valgrind's memcheck usually checks # (heap buffer overflows, use of uninitialized memory, use-after-free, # etc.) and (2) branches or memory access depending on secret values, # which will be reported as uninitialized memory. To distinguish between # secret and actually uninitialized: # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist? # - or alternatively, build with debug info and manually run the offending # test suite with valgrind --track-origins=yes, then check if the origin # was TEST_CF_SECRET() or something else. msg "build: cmake release GCC, full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO skip_suites_without_constant_flow cmake -D CMAKE_BUILD_TYPE:String=Release . make # this only shows a summary of the results (how many of each type) # details are left in Testing//DynamicAnalysis.xml msg "test: some suites (full minus MBEDTLS_USE_PSA_CRYPTO, valgrind + constant flow)" make memcheck # Test asm path in constant time module - by default, it will test the plain C # path under Valgrind or Memsan. Running only the constant_time tests is fast (<1s) msg "test: valgrind asm constant_time" scripts/config.py --force set MBEDTLS_TEST_CONSTANT_FLOW_ASM skip_all_except_given_suite test_suite_constant_time cmake -D CMAKE_BUILD_TYPE:String=Release . make clean make make memcheck } component_release_test_valgrind_constant_flow_psa () { # This tests both (1) everything that valgrind's memcheck usually checks # (heap buffer overflows, use of uninitialized memory, use-after-free, # etc.) and (2) branches or memory access depending on secret values, # which will be reported as uninitialized memory. To distinguish between # secret and actually uninitialized: # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist? # - or alternatively, build with debug info and manually run the offending # test suite with valgrind --track-origins=yes, then check if the origin # was TEST_CF_SECRET() or something else. msg "build: cmake release GCC, full config with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND skip_suites_without_constant_flow cmake -D CMAKE_BUILD_TYPE:String=Release . make # this only shows a summary of the results (how many of each type) # details are left in Testing//DynamicAnalysis.xml msg "test: some suites (valgrind + constant flow)" make memcheck } component_test_tsan () { msg "build: TSan (clang)" scripts/config.py full scripts/config.py set MBEDTLS_THREADING_C scripts/config.py set MBEDTLS_THREADING_PTHREAD # Self-tests do not currently use multiple threads. scripts/config.py unset MBEDTLS_SELF_TEST # The deprecated MBEDTLS_PSA_CRYPTO_SE_C interface is not thread safe. scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C CC=clang cmake -D CMAKE_BUILD_TYPE:String=TSan . make msg "test: main suites (TSan)" make test } component_test_default_no_deprecated () { # Test that removing the deprecated features from the default # configuration leaves something consistent. msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s scripts/config.py set MBEDTLS_DEPRECATED_REMOVED make CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s make test } component_test_full_no_deprecated () { msg "build: make, full_no_deprecated config" # ~ 30s scripts/config.py full_no_deprecated make CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, full_no_deprecated config" # ~ 5s make test msg "test: ensure that X509 has no direct dependency on BIGNUM_C" not grep mbedtls_mpi library/libmbedx509.a } component_test_full_no_deprecated_deprecated_warning () { # Test that there is nothing deprecated in "full_no_deprecated". # A deprecated feature would trigger a warning (made fatal) from # MBEDTLS_DEPRECATED_WARNING. msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s scripts/config.py full_no_deprecated scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED scripts/config.py set MBEDTLS_DEPRECATED_WARNING make CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s make test } component_test_full_deprecated_warning () { # Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes # with only certain whitelisted types of warnings. msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s scripts/config.py full scripts/config.py set MBEDTLS_DEPRECATED_WARNING # Expect warnings from '#warning' directives in check_config.h. # Note that gcc is required to allow the use of -Wno-error=cpp, which allows us to # display #warning messages without them being treated as errors. make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s # Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features. # By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set. # Expect warnings from '#warning' directives in check_config.h and # from the use of deprecated functions in test suites. make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s make test msg "program demos: full config + MBEDTLS_TEST_DEPRECATED" # ~10s tests/scripts/run_demos.py } # Check that the specified libraries exist and are empty. are_empty_libraries () { nm "$@" >/dev/null 2>/dev/null ! nm "$@" 2>/dev/null | grep -v ':$' | grep . } component_build_crypto_default () { msg "build: make, crypto only" scripts/config.py crypto make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_build_crypto_full () { msg "build: make, crypto only, full config" scripts/config.py crypto_full make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_test_crypto_for_psa_service () { msg "build: make, config for PSA crypto service" scripts/config.py crypto scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER # Disable things that are not needed for just cryptography, to # reach a configuration that would be typical for a PSA cryptography # service providing all implemented PSA algorithms. # System stuff scripts/config.py unset MBEDTLS_ERROR_C scripts/config.py unset MBEDTLS_TIMING_C scripts/config.py unset MBEDTLS_VERSION_FEATURES # Crypto stuff with no PSA interface scripts/config.py unset MBEDTLS_BASE64_C # Keep MBEDTLS_CIPHER_C because psa_crypto_cipher, CCM and GCM need it. scripts/config.py unset MBEDTLS_HKDF_C # PSA's HKDF is independent # Keep MBEDTLS_MD_C because deterministic ECDSA needs it for HMAC_DRBG. scripts/config.py unset MBEDTLS_NIST_KW_C scripts/config.py unset MBEDTLS_PEM_PARSE_C scripts/config.py unset MBEDTLS_PEM_WRITE_C scripts/config.py unset MBEDTLS_PKCS12_C scripts/config.py unset MBEDTLS_PKCS5_C # MBEDTLS_PK_PARSE_C and MBEDTLS_PK_WRITE_C are actually currently needed # in PSA code to work with RSA keys. We don't require users to set those: # they will be reenabled in build_info.h. scripts/config.py unset MBEDTLS_PK_C scripts/config.py unset MBEDTLS_PK_PARSE_C scripts/config.py unset MBEDTLS_PK_WRITE_C make CFLAGS='-O1 -Werror' all test are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_build_crypto_baremetal () { msg "build: make, crypto only, baremetal config" scripts/config.py crypto_baremetal make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/" are_empty_libraries library/libmbedx509.* library/libmbedtls.* } support_build_crypto_baremetal () { support_build_baremetal "$@" } component_build_baremetal () { msg "build: make, baremetal config" scripts/config.py baremetal make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/" } support_build_baremetal () { # Older Glibc versions include time.h from other headers such as stdlib.h, # which makes the no-time.h-in-baremetal check fail. Ubuntu 16.04 has this # problem, Ubuntu 18.04 is ok. ! grep -q -F time.h /usr/include/x86_64-linux-gnu/sys/types.h } # depends.py family of tests component_test_depends_py_cipher_id () { msg "test/build: depends.py cipher_id (gcc)" tests/scripts/depends.py cipher_id --unset-use-psa } component_test_depends_py_cipher_chaining () { msg "test/build: depends.py cipher_chaining (gcc)" tests/scripts/depends.py cipher_chaining --unset-use-psa } component_test_depends_py_cipher_padding () { msg "test/build: depends.py cipher_padding (gcc)" tests/scripts/depends.py cipher_padding --unset-use-psa } component_test_depends_py_curves () { msg "test/build: depends.py curves (gcc)" tests/scripts/depends.py curves --unset-use-psa } component_test_depends_py_hashes () { msg "test/build: depends.py hashes (gcc)" tests/scripts/depends.py hashes --unset-use-psa } component_test_depends_py_kex () { msg "test/build: depends.py kex (gcc)" tests/scripts/depends.py kex --unset-use-psa } component_test_depends_py_pkalgs () { msg "test/build: depends.py pkalgs (gcc)" tests/scripts/depends.py pkalgs --unset-use-psa } # PSA equivalents of the depends.py tests component_test_depends_py_cipher_id_psa () { msg "test/build: depends.py cipher_id (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py cipher_id } component_test_depends_py_cipher_chaining_psa () { msg "test/build: depends.py cipher_chaining (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py cipher_chaining } component_test_depends_py_cipher_padding_psa () { msg "test/build: depends.py cipher_padding (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py cipher_padding } component_test_depends_py_curves_psa () { msg "test/build: depends.py curves (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py curves } component_test_depends_py_hashes_psa () { msg "test/build: depends.py hashes (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py hashes } component_test_depends_py_kex_psa () { msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py kex } component_test_depends_py_pkalgs_psa () { msg "test/build: depends.py pkalgs (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py pkalgs } component_test_psa_crypto_config_ffdh_2048_only () { msg "build: full config - only DH 2048" scripts/config.py full # Disable all DH groups other than 2048. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_3072 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_4096 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_6144 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_DH_RFC7919_8192 make CFLAGS="$ASAN_CFLAGS -Werror" LDFLAGS="$ASAN_CFLAGS" msg "test: full config - only DH 2048" make test msg "ssl-opt: full config - only DH 2048" tests/ssl-opt.sh -f "ffdh" } component_build_no_pk_rsa_alt_support () { msg "build: !MBEDTLS_PK_RSA_ALT_SUPPORT" # ~30s scripts/config.py full scripts/config.py unset MBEDTLS_PK_RSA_ALT_SUPPORT scripts/config.py set MBEDTLS_RSA_C scripts/config.py set MBEDTLS_X509_CRT_WRITE_C # Only compile - this is primarily to test for compile issues make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' } component_build_module_alt () { msg "build: MBEDTLS_XXX_ALT" # ~30s scripts/config.py full # Disable options that are incompatible with some ALT implementations: # aesni.c and padlock.c reference mbedtls_aes_context fields directly. scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C # MBEDTLS_ECP_RESTARTABLE is documented as incompatible. scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # You can only have one threading implementation: alt or pthread, not both. scripts/config.py unset MBEDTLS_THREADING_PTHREAD # The SpecifiedECDomain parsing code accesses mbedtls_ecp_group fields # directly and assumes the implementation works with partial groups. scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED # MBEDTLS_SHA256_*ALT can't be used with MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_* scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY # MBEDTLS_SHA512_*ALT can't be used with MBEDTLS_SHA512_USE_A64_CRYPTO_* scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY # Enable all MBEDTLS_XXX_ALT for whole modules. Do not enable # MBEDTLS_XXX_YYY_ALT which are for single functions. scripts/config.py set-all 'MBEDTLS_([A-Z0-9]*|NIST_KW)_ALT' scripts/config.py unset MBEDTLS_DHM_ALT #incompatible with MBEDTLS_DEBUG_C # We can only compile, not link, since we don't have any implementations # suitable for testing with the dummy alt headers. make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib } component_build_dhm_alt () { msg "build: MBEDTLS_DHM_ALT" # ~30s scripts/config.py full scripts/config.py set MBEDTLS_DHM_ALT # debug.c currently references mbedtls_dhm_context fields directly. scripts/config.py unset MBEDTLS_DEBUG_C # We can only compile, not link, since we don't have any implementations # suitable for testing with the dummy alt headers. make CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib } component_test_no_psa_crypto_full_cmake_asan () { # full minus MBEDTLS_PSA_CRYPTO_C: run the same set of tests as basic-build-test.sh msg "build: cmake, full config minus PSA crypto, ASan" scripts/config.py full scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_CLIENT scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (full minus PSA crypto)" make test # Note: ssl-opt.sh has some test cases that depend on # MBEDTLS_ECP_RESTARTABLE && !MBEDTLS_USE_PSA_CRYPTO # This is the only component where those tests are not skipped. msg "test: ssl-opt.sh (full minus PSA crypto)" tests/ssl-opt.sh # Note: the next two invocations cover all compat.sh test cases. # We should use the same here and in basic-build-test.sh. msg "test: compat.sh: default version (full minus PSA crypto)" tests/compat.sh -e 'ARIA\|CHACHA' msg "test: compat.sh: next: ARIA, Chacha (full minus PSA crypto)" env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' } component_test_psa_crypto_config_accel_ecdsa () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ $(helper_get_psa_key_type_list "ECC") \ $(helper_get_psa_curve_list)" # Configure # --------- # Start from default config (no USE_PSA) + TLS 1.3 helper_libtestdriver1_adjust_config "default" # Disable the module that's accelerated scripts/config.py unset MBEDTLS_ECDSA_C # Disable things that depend on it scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA" make test } component_test_psa_crypto_config_accel_ecdh () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDH \ $(helper_get_psa_key_type_list "ECC") \ $(helper_get_psa_curve_list)" # Configure # --------- # Start from default config (no USE_PSA) helper_libtestdriver1_adjust_config "default" # Disable the module that's accelerated scripts/config.py unset MBEDTLS_ECDH_C # Disable things that depend on it scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecdh_ library/ecdh.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH" make test } component_test_psa_crypto_config_accel_ffdh () { msg "build: full with accelerated FFDH" # Algorithms and key types to accelerate loc_accel_list="ALG_FFDH \ $(helper_get_psa_key_type_list "DH") \ $(helper_get_psa_dh_group_list)" # Configure # --------- # start with full (USE_PSA and TLS 1.3) helper_libtestdriver1_adjust_config "full" # Disable the module that's accelerated scripts/config.py unset MBEDTLS_DHM_C # Disable things that depend on it scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_dhm_ library/dhm.o # Run the tests # ------------- msg "test: full with accelerated FFDH" make test msg "ssl-opt: full with accelerated FFDH alg" tests/ssl-opt.sh -f "ffdh" } component_test_psa_crypto_config_reference_ffdh () { msg "build: full with non-accelerated FFDH" # Start with full (USE_PSA and TLS 1.3) helper_libtestdriver1_adjust_config "full" # Disable things that are not supported scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED make msg "test suites: full with non-accelerated FFDH alg" make test msg "ssl-opt: full with non-accelerated FFDH alg" tests/ssl-opt.sh -f "ffdh" } component_test_psa_crypto_config_accel_pake () { msg "build: full with accelerated PAKE" loc_accel_list="ALG_JPAKE \ $(helper_get_psa_key_type_list "ECC") \ $(helper_get_psa_curve_list)" # Configure # --------- helper_libtestdriver1_adjust_config "full" # Make built-in fallback not available scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecjpake_init library/ecjpake.o # Run the tests # ------------- msg "test: full with accelerated PAKE" make test } component_test_psa_crypto_config_accel_ecc_some_key_types () { msg "build: full with accelerated EC algs and some key types" # Algorithms and key types to accelerate # For key types, use an explicitly list to omit GENERATE (and DERIVE) loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ KEY_TYPE_ECC_PUBLIC_KEY \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ $(helper_get_psa_curve_list)" # Configure # --------- # start with config full for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" # Disable modules that are accelerated - some will be re-enabled scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_ECP_C # Disable all curves - those that aren't accelerated should be re-enabled helper_disable_builtin_curves # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # this is not supported by the driver API yet scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # ECP should be re-enabled but not the others not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecdsa library/ecdsa.o not grep mbedtls_ecjpake library/ecjpake.o grep mbedtls_ecp library/ecp.o # Run the tests # ------------- msg "test suites: full with accelerated EC algs and some key types" make test } # Run tests with only (non-)Weierstrass accelerated # Common code used in: # - component_test_psa_crypto_config_accel_ecc_weierstrass_curves # - component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves common_test_psa_crypto_config_accel_ecc_some_curves () { weierstrass=$1 if [ $weierstrass -eq 1 ]; then desc="Weierstrass" else desc="non-Weierstrass" fi msg "build: crypto_full minus PK with accelerated EC algs and $desc curves" # Note: Curves are handled in a special way by the libtestdriver machinery, # so we only want to include them in the accel list when building the main # libraries, hence the use of a separate variable. # Note: the following loop is a modified version of # helper_get_psa_curve_list that only keeps Weierstrass families. loc_weierstrass_list="" loc_non_weierstrass_list="" for item in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do case $item in ECC_BRAINPOOL*|ECC_SECP*) loc_weierstrass_list="$loc_weierstrass_list $item" ;; *) loc_non_weierstrass_list="$loc_non_weierstrass_list $item" ;; esac done if [ $weierstrass -eq 1 ]; then loc_curve_list=$loc_weierstrass_list else loc_curve_list=$loc_non_weierstrass_list fi # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ $(helper_get_psa_key_type_list "ECC") \ $loc_curve_list" # Configure # --------- # Start with config crypto_full and remove PK_C: # that's what's supported now, see docs/driver-only-builds.md. helper_libtestdriver1_adjust_config "crypto_full" scripts/config.py unset MBEDTLS_PK_C scripts/config.py unset MBEDTLS_PK_PARSE_C scripts/config.py unset MBEDTLS_PK_WRITE_C # Disable modules that are accelerated - some will be re-enabled scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_ECP_C # Disable all curves - those that aren't accelerated should be re-enabled helper_disable_builtin_curves # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # this is not supported by the driver API yet scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # We expect ECDH to be re-enabled for the missing curves grep mbedtls_ecdh_ library/ecdh.o # We expect ECP to be re-enabled, however the parts specific to the # families of curves that are accelerated should be ommited. # - functions with mxz in the name are specific to Montgomery curves # - ecp_muladd is specific to Weierstrass curves ##nm library/ecp.o | tee ecp.syms if [ $weierstrass -eq 1 ]; then not grep mbedtls_ecp_muladd library/ecp.o grep mxz library/ecp.o else grep mbedtls_ecp_muladd library/ecp.o not grep mxz library/ecp.o fi # We expect ECDSA and ECJPAKE to be re-enabled only when # Weierstrass curves are not accelerated if [ $weierstrass -eq 1 ]; then not grep mbedtls_ecdsa library/ecdsa.o not grep mbedtls_ecjpake library/ecjpake.o else grep mbedtls_ecdsa library/ecdsa.o grep mbedtls_ecjpake library/ecjpake.o fi # Run the tests # ------------- msg "test suites: crypto_full minus PK with accelerated EC algs and $desc curves" make test } component_test_psa_crypto_config_accel_ecc_weierstrass_curves () { common_test_psa_crypto_config_accel_ecc_some_curves 1 } component_test_psa_crypto_config_accel_ecc_non_weierstrass_curves () { common_test_psa_crypto_config_accel_ecc_some_curves 0 } # Auxiliary function to build config for all EC based algorithms (EC-JPAKE, # ECDH, ECDSA) with and without drivers. # The input parameter is a boolean value which indicates: # - 0 keep built-in EC algs, # - 1 exclude built-in EC algs (driver only). # # This is used by the two following components to ensure they always use the # same config, except for the use of driver or built-in EC algorithms: # - component_test_psa_crypto_config_accel_ecc_ecp_light_only; # - component_test_psa_crypto_config_reference_ecc_ecp_light_only. # This supports comparing their test coverage with analyze_outcomes.py. config_psa_crypto_config_ecp_light_only () { driver_only="$1" # start with config full for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$driver_only" -eq 1 ]; then # Disable modules that are accelerated scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_ECP_C fi # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE } # Keep in sync with component_test_psa_crypto_config_reference_ecc_ecp_light_only component_test_psa_crypto_config_accel_ecc_ecp_light_only () { msg "build: full with accelerated EC algs" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ $(helper_get_psa_key_type_list "ECC") \ $(helper_get_psa_curve_list)" # Configure # --------- # Use the same config as reference, only without built-in EC algs config_psa_crypto_config_ecp_light_only 1 # Do not disable builtin curves because that support is required for: # - MBEDTLS_PK_PARSE_EC_EXTENDED # - MBEDTLS_PK_PARSE_EC_COMPRESSED # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o not grep mbedtls_ecp_mul library/ecp.o # Run the tests # ------------- msg "test suites: full with accelerated EC algs" make test msg "ssl-opt: full with accelerated EC algs" tests/ssl-opt.sh } # Keep in sync with component_test_psa_crypto_config_accel_ecc_ecp_light_only component_test_psa_crypto_config_reference_ecc_ecp_light_only () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs" config_psa_crypto_config_ecp_light_only 0 make msg "test suites: full with non-accelerated EC algs" make test msg "ssl-opt: full with non-accelerated EC algs" tests/ssl-opt.sh } # This helper function is used by: # - component_test_psa_crypto_config_accel_ecc_no_ecp_at_all() # - component_test_psa_crypto_config_reference_ecc_no_ecp_at_all() # to ensure that both tests use the same underlying configuration when testing # driver's coverage with analyze_outcomes.py. # # This functions accepts 1 boolean parameter as follows: # - 1: building with accelerated EC algorithms (ECDSA, ECDH, ECJPAKE), therefore # excluding their built-in implementation as well as ECP_C & ECP_LIGHT # - 0: include built-in implementation of EC algorithms. # # PK_C and RSA_C are always disabled to ensure there is no remaining dependency # on the ECP module. config_psa_crypto_no_ecp_at_all () { driver_only="$1" # start with full config for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$driver_only" -eq 1 ]; then # Disable modules that are accelerated scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C # Disable ECP module (entirely) scripts/config.py unset MBEDTLS_ECP_C fi # Disable all the features that auto-enable ECP_LIGHT (see build_info.h) scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE } # Build and test a configuration where driver accelerates all EC algs while # all support and dependencies from ECP and ECP_LIGHT are removed on the library # side. # # Keep in sync with component_test_psa_crypto_config_reference_ecc_no_ecp_at_all() component_test_psa_crypto_config_accel_ecc_no_ecp_at_all () { msg "build: full + accelerated EC algs - ECP" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ $(helper_get_psa_key_type_list "ECC") \ $(helper_get_psa_curve_list)" # Configure # --------- # Set common configurations between library's and driver's builds config_psa_crypto_no_ecp_at_all 1 # Disable all the builtin curves. All the required algs are accelerated. helper_disable_builtin_curves # Build # ----- # Things we wanted supported in libtestdriver1, but not accelerated in the main library: # SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o # Also ensure that ECP module was not re-enabled not grep mbedtls_ecp_ library/ecp.o # Run the tests # ------------- msg "test: full + accelerated EC algs - ECP" make test msg "ssl-opt: full + accelerated EC algs - ECP" tests/ssl-opt.sh } # Reference function used for driver's coverage analysis in analyze_outcomes.py # in conjunction with component_test_psa_crypto_config_accel_ecc_no_ecp_at_all(). # Keep in sync with its accelerated counterpart. component_test_psa_crypto_config_reference_ecc_no_ecp_at_all () { msg "build: full + non accelerated EC algs" config_psa_crypto_no_ecp_at_all 0 make msg "test: full + non accelerated EC algs" make test msg "ssl-opt: full + non accelerated EC algs" tests/ssl-opt.sh } # This is a common configuration helper used directly from: # - common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum # - common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum # and indirectly from: # - component_test_psa_crypto_config_accel_ecc_no_bignum # - accelerate all EC algs, disable RSA and FFDH # - component_test_psa_crypto_config_reference_ecc_no_bignum # - this is the reference component of the above # - it still disables RSA and FFDH, but it uses builtin EC algs # - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum # - accelerate all EC and FFDH algs, disable only RSA # - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum # - this is the reference component of the above # - it still disables RSA, but it uses builtin EC and FFDH algs # # This function accepts 2 parameters: # $1: a boolean value which states if we are testing an accelerated scenario # or not. # $2: a string value which states which components are tested. Allowed values # are "ECC" or "ECC_DH". config_psa_crypto_config_accel_ecc_ffdh_no_bignum () { driver_only="$1" test_target="$2" # start with full config for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$driver_only" -eq 1 ]; then # Disable modules that are accelerated scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C # Disable ECP module (entirely) scripts/config.py unset MBEDTLS_ECP_C # Also disable bignum scripts/config.py unset MBEDTLS_BIGNUM_C fi # Disable all the features that auto-enable ECP_LIGHT (see build_info.h) scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # RSA support is intentionally disabled on this test because RSA_C depends # on BIGNUM_C. scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*" scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*" scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # Also disable key exchanges that depend on RSA scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED if [ "$test_target" = "ECC" ]; then # When testing ECC only, we disable FFDH support, both from builtin and # PSA sides, and also disable the key exchanges that depend on DHM. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_FFDH scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_DH_[0-9A-Z_a-z]*" scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_DH_RFC7919_[0-9]*" scripts/config.py unset MBEDTLS_DHM_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED else # When testing ECC and DH instead, we disable DHM and depending key # exchanges only in the accelerated build if [ "$driver_only" -eq 1 ]; then scripts/config.py unset MBEDTLS_DHM_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED fi fi # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE } # Common helper used by: # - component_test_psa_crypto_config_accel_ecc_no_bignum # - component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum # # The goal is to build and test accelerating either: # - ECC only or # - both ECC and FFDH # # It is meant to be used in conjunction with # common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum() for drivers # coverage analysis in the "analyze_outcomes.py" script. common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () { test_target="$1" # This is an internal helper to simplify text message handling if [ "$test_target" = "ECC_DH" ]; then accel_text="ECC/FFDH" removed_text="ECP - DH" else accel_text="ECC" removed_text="ECP" fi msg "build: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM" # By default we accelerate all EC keys/algs loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ $(helper_get_psa_key_type_list "ECC") \ $(helper_get_psa_curve_list)" # Optionally we can also add DH to the list of accelerated items if [ "$test_target" = "ECC_DH" ]; then loc_accel_list="$loc_accel_list \ ALG_FFDH \ $(helper_get_psa_key_type_list "DH") \ $(helper_get_psa_dh_group_list)" fi # Configure # --------- # Set common configurations between library's and driver's builds config_psa_crypto_config_accel_ecc_ffdh_no_bignum 1 "$test_target" # Disable all the builtin curves. All the required algs are accelerated. helper_disable_builtin_curves # Build # ----- # Things we wanted supported in libtestdriver1, but not accelerated in the main library: # SHA-1 and all SHA-2/3 variants, as they are used by ECDSA deterministic. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o # Also ensure that ECP, RSA, [DHM] or BIGNUM modules were not re-enabled not grep mbedtls_ecp_ library/ecp.o not grep mbedtls_rsa_ library/rsa.o not grep mbedtls_mpi_ library/bignum.o not grep mbedtls_dhm_ library/dhm.o # Run the tests # ------------- msg "test suites: full + accelerated $accel_text algs + USE_PSA - $removed_text - DHM - BIGNUM" make test msg "ssl-opt: full + accelerated $accel_text algs + USE_PSA - $removed_text - BIGNUM" tests/ssl-opt.sh } # Common helper used by: # - component_test_psa_crypto_config_reference_ecc_no_bignum # - component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum # # The goal is to build and test a reference scenario (i.e. with builtin # components) compared to the ones used in # common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() above. # # It is meant to be used in conjunction with # common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum() for drivers' # coverage analysis in "analyze_outcomes.py" script. common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () { test_target="$1" # This is an internal helper to simplify text message handling if [ "$test_target" = "ECC_DH" ]; then accel_text="ECC/FFDH" else accel_text="ECC" fi msg "build: full + non accelerated $accel_text algs + USE_PSA" config_psa_crypto_config_accel_ecc_ffdh_no_bignum 0 "$test_target" make msg "test suites: full + non accelerated EC algs + USE_PSA" make test msg "ssl-opt: full + non accelerated $accel_text algs + USE_PSA" tests/ssl-opt.sh } component_test_psa_crypto_config_accel_ecc_no_bignum () { common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC" } component_test_psa_crypto_config_reference_ecc_no_bignum () { common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC" } component_test_psa_crypto_config_accel_ecc_ffdh_no_bignum () { common_test_psa_crypto_config_accel_ecc_ffdh_no_bignum "ECC_DH" } component_test_psa_crypto_config_reference_ecc_ffdh_no_bignum () { common_test_psa_crypto_config_reference_ecc_ffdh_no_bignum "ECC_DH" } # Helper for setting common configurations between: # - component_test_tfm_config_p256m_driver_accel_ec() # - component_test_tfm_config() common_tfm_config () { # Enable TF-M config cp configs/config-tfm.h "$CONFIG_H" echo "#undef MBEDTLS_PSA_CRYPTO_CONFIG_FILE" >> "$CONFIG_H" cp configs/ext/crypto_config_profile_medium.h "$CRYPTO_CONFIG_H" # Other config adjustment to make the tests pass. # This should probably be adopted upstream. # # - USE_PSA_CRYPTO for PK_HAVE_ECC_KEYS echo "#define MBEDTLS_USE_PSA_CRYPTO" >> "$CONFIG_H" # Config adjustment for better test coverage in our environment. # This is not needed just to build and pass tests. # # Enable filesystem I/O for the benefit of PK parse/write tests. echo "#define MBEDTLS_FS_IO" >> "$CONFIG_H" } # Keep this in sync with component_test_tfm_config() as they are both meant # to be used in analyze_outcomes.py for driver's coverage analysis. component_test_tfm_config_p256m_driver_accel_ec () { msg "build: TF-M config + p256m driver + accel ECDH(E)/ECDSA" common_tfm_config # Build crypto library make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -I../tests/include/spe" LDFLAGS="$ASAN_CFLAGS" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o # Also ensure that ECP, RSA, DHM or BIGNUM modules were not re-enabled not grep mbedtls_ecp_ library/ecp.o not grep mbedtls_rsa_ library/rsa.o not grep mbedtls_dhm_ library/dhm.o not grep mbedtls_mpi_ library/bignum.o # Check that p256m was built grep -q p256_ecdsa_ library/libmbedcrypto.a # In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration # files, so we want to ensure that it has not be re-enabled accidentally. not grep mbedtls_cipher library/cipher.o # Run the tests msg "test: TF-M config + p256m driver + accel ECDH(E)/ECDSA" make test } # Keep this in sync with component_test_tfm_config_p256m_driver_accel_ec() as # they are both meant to be used in analyze_outcomes.py for driver's coverage # analysis. component_test_tfm_config () { common_tfm_config # Disable P256M driver, which is on by default, so that analyze_outcomes # can compare this test with test_tfm_config_p256m_driver_accel_ec echo "#undef MBEDTLS_PSA_P256M_DRIVER_ENABLED" >> "$CONFIG_H" msg "build: TF-M config" make CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' tests # Check that p256m was not built not grep p256_ecdsa_ library/libmbedcrypto.a # In "config-tfm.h" we disabled CIPHER_C tweaking TF-M's configuration # files, so we want to ensure that it has not be re-enabled accidentally. not grep mbedtls_cipher library/cipher.o msg "test: TF-M config" make test } # Common helper for component_full_without_ecdhe_ecdsa() and # component_full_without_ecdhe_ecdsa_and_tls13() which: # - starts from the "full" configuration minus the list of symbols passed in # as 1st parameter # - build # - test only TLS (i.e. test_suite_tls and ssl-opt) build_full_minus_something_and_test_tls () { symbols_to_disable="$1" msg "build: full minus something, test TLS" scripts/config.py full for sym in $symbols_to_disable; do echo "Disabling $sym" scripts/config.py unset $sym done make msg "test: full minus something, test TLS" ( cd tests; ./test_suite_ssl ) msg "ssl-opt: full minus something, test TLS" tests/ssl-opt.sh } component_full_without_ecdhe_ecdsa () { build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED" } component_full_without_ecdhe_ecdsa_and_tls13 () { build_full_minus_something_and_test_tls "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED MBEDTLS_SSL_PROTO_TLS1_3" } # This is an helper used by: # - component_test_psa_ecc_key_pair_no_derive # - component_test_psa_ecc_key_pair_no_generate # The goal is to test with all PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy symbols # enabled, but one. Input arguments are as follows: # - $1 is the key type under test, i.e. ECC/RSA/DH # - $2 is the key option to be unset (i.e. generate, derive, etc) build_and_test_psa_want_key_pair_partial () { key_type=$1 unset_option=$2 disabled_psa_want="PSA_WANT_KEY_TYPE_${key_type}_KEY_PAIR_${unset_option}" msg "build: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # All the PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy are enabled by default in # crypto_config.h so we just disable the one we don't want. scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$disabled_psa_want" make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: full - MBEDTLS_USE_PSA_CRYPTO - ${disabled_psa_want}" make test } component_test_psa_ecc_key_pair_no_derive () { build_and_test_psa_want_key_pair_partial "ECC" "DERIVE" } component_test_psa_ecc_key_pair_no_generate () { build_and_test_psa_want_key_pair_partial "ECC" "GENERATE" } config_psa_crypto_accel_rsa () { driver_only=$1 # Start from crypto_full config (no X.509, no TLS) helper_libtestdriver1_adjust_config "crypto_full" if [ "$driver_only" -eq 1 ]; then # Remove RSA support and its dependencies scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 # We need PEM parsing in the test library as well to support the import # of PEM encoded RSA keys. scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_PEM_PARSE_C scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_BASE64_C fi } component_test_psa_crypto_config_accel_rsa_crypto () { msg "build: crypto_full with accelerated RSA" loc_accel_list="ALG_RSA_OAEP ALG_RSA_PSS \ ALG_RSA_PKCS1V15_CRYPT ALG_RSA_PKCS1V15_SIGN \ KEY_TYPE_RSA_PUBLIC_KEY \ KEY_TYPE_RSA_KEY_PAIR_BASIC \ KEY_TYPE_RSA_KEY_PAIR_GENERATE \ KEY_TYPE_RSA_KEY_PAIR_IMPORT \ KEY_TYPE_RSA_KEY_PAIR_EXPORT" # Configure # --------- config_psa_crypto_accel_rsa 1 # Build # ----- # These hashes are needed for unit tests. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512 ALG_MD5" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_rsa library/rsa.o # Run the tests # ------------- msg "test: crypto_full with accelerated RSA" make test } component_test_psa_crypto_config_reference_rsa_crypto () { msg "build: crypto_full with non-accelerated RSA" # Configure # --------- config_psa_crypto_accel_rsa 0 # Build # ----- make # Run the tests # ------------- msg "test: crypto_full with non-accelerated RSA" make test } # This is a temporary test to verify that full RSA support is present even when # only one single new symbols (PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC) is defined. component_test_new_psa_want_key_pair_symbol () { msg "Build: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC" # Create a temporary output file unless there is already one set if [ "$MBEDTLS_TEST_OUTCOME_FILE" ]; then REMOVE_OUTCOME_ON_EXIT="no" else REMOVE_OUTCOME_ON_EXIT="yes" MBEDTLS_TEST_OUTCOME_FILE="$PWD/out.csv" export MBEDTLS_TEST_OUTCOME_FILE fi # Start from crypto configuration scripts/config.py crypto # Remove RSA support and its dependencies scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # Enable PSA support scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG # Keep only PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC enabled in order to ensure # that proper translations is done in crypto_legacy.h. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE make msg "Test: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC" make test # Parse only 1 relevant line from the outcome file, i.e. a test which is # performing RSA signature. msg "Verify that 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' is PASS" cat $MBEDTLS_TEST_OUTCOME_FILE | grep 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' | grep -q "PASS" if [ "$REMOVE_OUTCOME_ON_EXIT" == "yes" ]; then rm $MBEDTLS_TEST_OUTCOME_FILE fi } component_test_psa_crypto_config_accel_hash () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \ ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" # Configure # --------- # Start from default config (no USE_PSA) helper_libtestdriver1_adjust_config "default" # Disable the things that are being accelerated scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C scripts/config.py unset MBEDTLS_SHA1_C scripts/config.py unset MBEDTLS_SHA224_C scripts/config.py unset MBEDTLS_SHA256_C scripts/config.py unset MBEDTLS_SHA384_C scripts/config.py unset MBEDTLS_SHA512_C scripts/config.py unset MBEDTLS_SHA3_C # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # There's a risk of something getting re-enabled via config_psa.h; # make sure it did not happen. Note: it's OK for MD_C to be enabled. not grep mbedtls_md5 library/md5.o not grep mbedtls_sha1 library/sha1.o not grep mbedtls_sha256 library/sha256.o not grep mbedtls_sha512 library/sha512.o not grep mbedtls_ripemd160 library/ripemd160.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" make test } component_test_psa_crypto_config_accel_hash_keep_builtins () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash" # This component ensures that all the test cases for # md_psa_dynamic_dispatch with legacy+driver in test_suite_md are run. loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \ ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" # Start from default config (no USE_PSA) helper_libtestdriver1_adjust_config "default" helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash" make test } # Auxiliary function to build config for hashes with and without drivers config_psa_crypto_hash_use_psa () { driver_only="$1" # start with config full for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$driver_only" -eq 1 ]; then # disable the built-in implementation of hashes scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C scripts/config.py unset MBEDTLS_SHA1_C scripts/config.py unset MBEDTLS_SHA224_C scripts/config.py unset MBEDTLS_SHA256_C # see external RNG below scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA384_C scripts/config.py unset MBEDTLS_SHA512_C scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA3_C fi } # Note that component_test_psa_crypto_config_reference_hash_use_psa # is related to this component and both components need to be kept in sync. # For details please see comments for component_test_psa_crypto_config_reference_hash_use_psa. component_test_psa_crypto_config_accel_hash_use_psa () { msg "test: full with accelerated hashes" loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \ ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" # Configure # --------- config_psa_crypto_hash_use_psa 1 # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # There's a risk of something getting re-enabled via config_psa.h; # make sure it did not happen. Note: it's OK for MD_C to be enabled. not grep mbedtls_md5 library/md5.o not grep mbedtls_sha1 library/sha1.o not grep mbedtls_sha256 library/sha256.o not grep mbedtls_sha512 library/sha512.o not grep mbedtls_ripemd160 library/ripemd160.o # Run the tests # ------------- msg "test: full with accelerated hashes" make test # This is mostly useful so that we can later compare outcome files with # the reference config in analyze_outcomes.py, to check that the # dependency declarations in ssl-opt.sh and in TLS code are correct. msg "test: ssl-opt.sh, full with accelerated hashes" tests/ssl-opt.sh # This is to make sure all ciphersuites are exercised, but we don't need # interop testing (besides, we already got some from ssl-opt.sh). msg "test: compat.sh, full with accelerated hashes" tests/compat.sh -p mbedTLS -V YES } # This component provides reference configuration for test_psa_crypto_config_accel_hash_use_psa # without accelerated hash. The outcome from both components are used by the analyze_outcomes.py # script to find regression in test coverage when accelerated hash is used (tests and ssl-opt). # Both components need to be kept in sync. component_test_psa_crypto_config_reference_hash_use_psa () { msg "test: full without accelerated hashes" config_psa_crypto_hash_use_psa 0 make msg "test: full without accelerated hashes" make test msg "test: ssl-opt.sh, full without accelerated hashes" tests/ssl-opt.sh } # Auxiliary function to build config for hashes with and without drivers config_psa_crypto_hmac_use_psa () { driver_only="$1" # start with config full for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$driver_only" -eq 1 ]; then # Disable MD_C in order to disable the builtin support for HMAC. MD_LIGHT # is still enabled though (for ENTROPY_C among others). scripts/config.py unset MBEDTLS_MD_C # Disable also the builtin hashes since they are supported by the driver # and MD module is able to perform PSA dispathing. scripts/config.py unset-all MBEDTLS_SHA scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C fi # Direct dependencies of MD_C. We disable them also in the reference # component to work with the same set of features. scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py unset MBEDTLS_PKCS5_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_HKDF_C # Dependencies of HMAC_DRBG scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_DETERMINISTIC_ECDSA } component_test_psa_crypto_config_accel_hmac () { msg "test: full with accelerated hmac" loc_accel_list="ALG_HMAC KEY_TYPE_HMAC \ ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 \ ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512 \ ALG_SHA3_224 ALG_SHA3_256 ALG_SHA3_384 ALG_SHA3_512" # Configure # --------- config_psa_crypto_hmac_use_psa 1 # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Ensure that built-in support for HMAC is disabled. not grep mbedtls_md_hmac library/md.o # Run the tests # ------------- msg "test: full with accelerated hmac" make test } component_test_psa_crypto_config_reference_hmac () { msg "test: full without accelerated hmac" config_psa_crypto_hmac_use_psa 0 make msg "test: full without accelerated hmac" make test } component_test_psa_crypto_config_accel_des () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES" # Albeit this components aims at accelerating DES which should only support # CBC and ECB modes, we need to accelerate more than that otherwise DES_C # would automatically be re-enabled by "config_adjust_legacy_from_psa.c" loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 \ ALG_CTR ALG_CFB ALG_OFB ALG_XTS ALG_CMAC \ KEY_TYPE_DES" # Note: we cannot accelerate all ciphers' key types otherwise we would also # have to either disable CCM/GCM or accelerate them, but that's out of scope # of this component. This limitation will be addressed by #8598. # Configure # --------- # Start from the full config helper_libtestdriver1_adjust_config "full" # Disable the things that are being accelerated scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7 scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS scripts/config.py unset MBEDTLS_DES_C scripts/config.py unset MBEDTLS_CMAC_C # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_des* library/des.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated DES" make test } component_test_psa_crypto_config_accel_aead () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD" loc_accel_list="ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 \ KEY_TYPE_AES KEY_TYPE_CHACHA20 KEY_TYPE_ARIA KEY_TYPE_CAMELLIA" # Configure # --------- # Start from full config helper_libtestdriver1_adjust_config "full" # Disable things that are being accelerated scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Disable CCM_STAR_NO_TAG because this re-enables CCM_C. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ccm library/ccm.o not grep mbedtls_gcm library/gcm.o not grep mbedtls_chachapoly library/chachapoly.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD" make test } # This is a common configuration function used in: # - component_test_psa_crypto_config_accel_cipher_aead_cmac # - component_test_psa_crypto_config_reference_cipher_aead_cmac common_psa_crypto_config_accel_cipher_aead_cmac () { # Start from the full config helper_libtestdriver1_adjust_config "full" scripts/config.py unset MBEDTLS_NIST_KW_C } # The 2 following test components, i.e. # - component_test_psa_crypto_config_accel_cipher_aead_cmac # - component_test_psa_crypto_config_reference_cipher_aead_cmac # are meant to be used together in analyze_outcomes.py script in order to test # driver's coverage for ciphers and AEADs. component_test_psa_crypto_config_accel_cipher_aead_cmac () { msg "build: full config with accelerated cipher inc. AEAD and CMAC" loc_accel_list="ALG_ECB_NO_PADDING ALG_CBC_NO_PADDING ALG_CBC_PKCS7 ALG_CTR ALG_CFB \ ALG_OFB ALG_XTS ALG_STREAM_CIPHER ALG_CCM_STAR_NO_TAG \ ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 ALG_CMAC \ KEY_TYPE_DES KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CHACHA20 KEY_TYPE_CAMELLIA" # Configure # --------- common_psa_crypto_config_accel_cipher_aead_cmac # Disable the things that are being accelerated scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7 scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C scripts/config.py unset MBEDTLS_CMAC_C scripts/config.py unset MBEDTLS_DES_C scripts/config.py unset MBEDTLS_AES_C scripts/config.py unset MBEDTLS_ARIA_C scripts/config.py unset MBEDTLS_CHACHA20_C scripts/config.py unset MBEDTLS_CAMELLIA_C # Disable CIPHER_C entirely as all ciphers/AEADs are accelerated and PSA # does not depend on it. scripts/config.py unset MBEDTLS_CIPHER_C # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_cipher library/cipher.o not grep mbedtls_des library/des.o not grep mbedtls_aes library/aes.o not grep mbedtls_aria library/aria.o not grep mbedtls_camellia library/camellia.o not grep mbedtls_ccm library/ccm.o not grep mbedtls_gcm library/gcm.o not grep mbedtls_chachapoly library/chachapoly.o not grep mbedtls_cmac library/cmac.o # Run the tests # ------------- msg "test: full config with accelerated cipher inc. AEAD and CMAC" make test msg "ssl-opt: full config with accelerated cipher inc. AEAD and CMAC" tests/ssl-opt.sh msg "compat.sh: full config with accelerated cipher inc. AEAD and CMAC" tests/compat.sh -V NO -p mbedTLS } component_test_psa_crypto_config_reference_cipher_aead_cmac () { msg "build: full config with non-accelerated cipher inc. AEAD and CMAC" common_psa_crypto_config_accel_cipher_aead_cmac make msg "test: full config with non-accelerated cipher inc. AEAD and CMAC" make test msg "ssl-opt: full config with non-accelerated cipher inc. AEAD and CMAC" tests/ssl-opt.sh msg "compat.sh: full config with non-accelerated cipher inc. AEAD and CMAC" tests/compat.sh -V NO -p mbedTLS } common_block_cipher_dispatch () { TEST_WITH_DRIVER="$1" # Start from the full config helper_libtestdriver1_adjust_config "full" if [ "$TEST_WITH_DRIVER" -eq 1 ]; then # Disable key types that are accelerated (there is no legacy equivalent # symbol for ECB) scripts/config.py unset MBEDTLS_AES_C scripts/config.py unset MBEDTLS_ARIA_C scripts/config.py unset MBEDTLS_CAMELLIA_C fi # Disable cipher's modes that, when not accelerated, cause # legacy key types to be re-enabled in "config_adjust_legacy_from_psa.h". # Keep this also in the reference component in order to skip the same tests # that were skipped in the accelerated one. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CTR scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CFB scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_OFB scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CMAC scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CCM_STAR_NO_TAG scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128 # Disable direct dependency on AES_C scripts/config.py unset MBEDTLS_NIST_KW_C # Prevent the cipher module from using deprecated PSA path. The reason is # that otherwise there will be tests relying on "aes_info" (defined in # "cipher_wrap.c") whose functions are not available when AES_C is # not defined. ARIA and Camellia are not a problem in this case because # the PSA path is not tested for these key types. scripts/config.py set MBEDTLS_DEPRECATED_REMOVED } component_test_full_block_cipher_psa_dispatch () { msg "build: full + PSA dispatch in block_cipher" loc_accel_list="ALG_ECB_NO_PADDING \ KEY_TYPE_AES KEY_TYPE_ARIA KEY_TYPE_CAMELLIA" # Configure # --------- common_block_cipher_dispatch 1 # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure disabled components were not re-enabled by accident (additive # config) not grep mbedtls_aes_ library/aes.o not grep mbedtls_aria_ library/aria.o not grep mbedtls_camellia_ library/camellia.o # Run the tests # ------------- msg "test: full + PSA dispatch in block_cipher" make test } # This is the reference component of component_test_full_block_cipher_psa_dispatch component_test_full_block_cipher_legacy_dispatch () { msg "build: full + legacy dispatch in block_cipher" common_block_cipher_dispatch 0 make msg "test: full + legacy dispatch in block_cipher" make test } component_test_aead_chachapoly_disabled () { msg "build: full minus CHACHAPOLY" scripts/config.py full scripts/config.py unset MBEDTLS_CHACHAPOLY_C scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305 make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: full minus CHACHAPOLY" make test } component_test_aead_only_ccm () { msg "build: full minus CHACHAPOLY and GCM" scripts/config.py full scripts/config.py unset MBEDTLS_CHACHAPOLY_C scripts/config.py unset MBEDTLS_GCM_C scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_GCM make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: full minus CHACHAPOLY and GCM" make test } component_test_ccm_aes_sha256 () { msg "build: CCM + AES + SHA256 configuration" cp "$CONFIG_TEST_DRIVER_H" "$CONFIG_H" cp configs/crypto-config-ccm-aes-sha256.h "$CRYPTO_CONFIG_H" make msg "test: CCM + AES + SHA256 configuration" make test } # This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test. component_build_psa_accel_alg_ecdh () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test. component_build_psa_accel_alg_hmac () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HMAC" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test. component_build_psa_accel_alg_hkdf () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_HKDF_C # Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it. scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test. component_build_psa_accel_alg_md5 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_MD5 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test. component_build_psa_accel_alg_ripemd160 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RIPEMD160 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test. component_build_psa_accel_alg_sha1 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_1 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test. component_build_psa_accel_alg_sha224 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_224 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test. component_build_psa_accel_alg_sha256 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_256 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test. component_build_psa_accel_alg_sha384 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_384 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test. component_build_psa_accel_alg_sha512 () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_SHA_512 - other hashes" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pkcs1v15_crypt () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pkcs1v15_sign () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_oaep () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pss () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_key_type_rsa_key_pair () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_key_type_rsa_public_key () { msg "build: full - MBEDTLS_USE_PSA_CRYPTO + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=$ASAN_CC CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include" LDFLAGS="$ASAN_CFLAGS" } component_build_tfm () { # Check that the TF-M configuration can build cleanly with various # warning flags enabled. We don't build or run tests, since the # TF-M configuration needs a TF-M platform. A tweaked version of # the configuration that works on mainstream platforms is in # configs/config-tfm.h, tested via test-ref-configs.pl. cp configs/config-tfm.h "$CONFIG_H" msg "build: TF-M config, clang, armv7-m thumb2" make lib CC="clang" CFLAGS="--target=arm-linux-gnueabihf -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused -I../tests/include/spe" msg "build: TF-M config, gcc native build" make clean make lib CC="gcc" CFLAGS="-Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wformat-signedness -Wlogical-op -I../tests/include/spe" } # Test that the given .o file builds with all (valid) combinations of the given options. # # Syntax: build_test_config_combos FILE VALIDATOR_FUNCTION OPT1 OPT2 ... # # The validator function is the name of a function to validate the combination of options. # It may be "" if all combinations are valid. # It receives a string containing a combination of options, as passed to the compiler, # e.g. "-DOPT1 -DOPT2 ...". It must return 0 iff the combination is valid, non-zero if invalid. build_test_config_combos () { file=$1 shift validate_options=$1 shift options=("$@") # clear all of the options so that they can be overridden on the clang commandline for opt in "${options[@]}"; do ./scripts/config.py unset ${opt} done # enter the directory containing the target file & strip the dir from the filename cd $(dirname ${file}) file=$(basename ${file}) # The most common issue is unused variables/functions, so ensure -Wunused is set. warning_flags="-Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused" # Extract the command generated by the Makefile to build the target file. # This ensures that we have any include paths, macro definitions, etc # that may be applied by make. # Add -fsyntax-only as we only want a syntax check and don't need to generate a file. compile_cmd="clang \$(LOCAL_CFLAGS) ${warning_flags} -fsyntax-only -c" makefile=$(TMPDIR=. mktemp) deps="" len=${#options[@]} source_file=${file%.o}.c targets=0 echo 'include Makefile' >${makefile} for ((i = 0; i < $((2**${len})); i++)); do # generate each of 2^n combinations of options # each bit of $i is used to determine if options[i] will be set or not target="t" clang_args="" for ((j = 0; j < ${len}; j++)); do if (((i >> j) & 1)); then opt=-D${options[$j]} clang_args="${clang_args} ${opt}" target="${target}${opt}" fi done # if combination is not known to be invalid, add it to the makefile if [[ -z $validate_options ]] || $validate_options "${clang_args}"; then cmd="${compile_cmd} ${clang_args}" echo "${target}: ${source_file}; $cmd ${source_file}" >> ${makefile} deps="${deps} ${target}" ((++targets)) fi done echo "build_test_config_combos: ${deps}" >> ${makefile} # execute all of the commands via Make (probably in parallel) make -s -f ${makefile} build_test_config_combos echo "$targets targets checked" # clean up the temporary makefile rm ${makefile} } validate_aes_config_variations () { if [[ "$1" == *"MBEDTLS_AES_USE_HARDWARE_ONLY"* ]]; then if [[ "$1" == *"MBEDTLS_PADLOCK_C"* ]]; then return 1 fi if [[ !(("$HOSTTYPE" == "aarch64" && "$1" != *"MBEDTLS_AESCE_C"*) || \ ("$HOSTTYPE" == "x86_64" && "$1" != *"MBEDTLS_AESNI_C"*)) ]]; then return 1 fi fi return 0 } component_build_aes_variations () { # 18s - around 90ms per clang invocation on M1 Pro # # aes.o has many #if defined(...) guards that intersect in complex ways. # Test that all the combinations build cleanly. MBEDTLS_ROOT_DIR="$PWD" msg "build: aes.o for all combinations of relevant config options" build_test_config_combos library/aes.o validate_aes_config_variations \ "MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \ "MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \ "MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_PADLOCK_C" "MBEDTLS_AES_USE_HARDWARE_ONLY" \ "MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH" cd "$MBEDTLS_ROOT_DIR" msg "build: aes.o for all combinations of relevant config options + BLOCK_CIPHER_NO_DECRYPT" # MBEDTLS_BLOCK_CIPHER_NO_DECRYPT is incompatible with ECB in PSA, CBC/XTS/NIST_KW/DES, # manually set or unset those configurations to check # MBEDTLS_BLOCK_CIPHER_NO_DECRYPT with various combinations in aes.o. scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS scripts/config.py unset MBEDTLS_DES_C scripts/config.py unset MBEDTLS_NIST_KW_C build_test_config_combos library/aes.o validate_aes_config_variations \ "MBEDTLS_AES_SETKEY_ENC_ALT" "MBEDTLS_AES_DECRYPT_ALT" \ "MBEDTLS_AES_ROM_TABLES" "MBEDTLS_AES_ENCRYPT_ALT" "MBEDTLS_AES_SETKEY_DEC_ALT" \ "MBEDTLS_AES_FEWER_TABLES" "MBEDTLS_PADLOCK_C" "MBEDTLS_AES_USE_HARDWARE_ONLY" \ "MBEDTLS_AESNI_C" "MBEDTLS_AESCE_C" "MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH" } component_test_no_platform () { # Full configuration build, without platform support, file IO and net sockets. # This should catch missing mbedtls_printf definitions, and by disabling file # IO, it should catch missing '#include ' msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s scripts/config.py full_no_platform scripts/config.py unset MBEDTLS_PLATFORM_C scripts/config.py unset MBEDTLS_NET_C scripts/config.py unset MBEDTLS_FS_IO scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED # Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19, # to re-enable platform integration features otherwise disabled in C99 builds make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test } component_build_no_std_function () { # catch compile bugs in _uninit functions msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s scripts/config.py full scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check . make } component_build_no_ssl_srv () { msg "build: full config except SSL server, make, gcc" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_SSL_SRV_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' } component_build_no_ssl_cli () { msg "build: full config except SSL client, make, gcc" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_SSL_CLI_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' } component_build_no_sockets () { # Note, C99 compliance can also be tested with the sockets support disabled, # as that requires a POSIX platform (which isn't the same as C99). msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc. scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib } component_test_memory_buffer_allocator_backtrace () { msg "build: default config with memory buffer allocator and backtrace enabled" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_MEMORY_BACKTRACE scripts/config.py set MBEDTLS_MEMORY_DEBUG cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE" make test } component_test_memory_buffer_allocator () { msg "build: default config with memory buffer allocator" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C" make test msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C" # MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out. tests/ssl-opt.sh -e '^DTLS proxy' } component_test_no_max_fragment_length () { # Run max fragment length tests with MFL disabled msg "build: default config except MFL extension (ASan build)" # ~ 30s scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: ssl-opt.sh, MFL-related tests" tests/ssl-opt.sh -f "Max fragment length" } component_test_asan_remove_peer_certificate () { msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)" scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" make test msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/ssl-opt.sh msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/compat.sh msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/context-info.sh } component_test_no_max_fragment_length_small_ssl_out_content_len () { msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)" scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MFL tests (disabled MFL extension case) & large packet tests" tests/ssl-opt.sh -f "Max fragment length\|Large buffer" msg "test: context-info.sh (disabled MFL extension case)" tests/context-info.sh } component_test_variable_ssl_in_out_buffer_len () { msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" tests/compat.sh } component_test_dtls_cid_legacy () { msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled" tests/compat.sh } component_test_ssl_alloc_buffer_and_mfl () { msg "build: default config with memory buffer allocator and MFL extension" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_MEMORY_DEBUG scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH" make test msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH" tests/ssl-opt.sh -f "Handshake memory usage" } component_test_when_no_ciphersuites_have_mac () { msg "build: when no ciphersuites have MAC" scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CMAC_C make msg "test: !MBEDTLS_SSL_SOME_SUITES_USE_MAC" make test msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_SUITES_USE_MAC" tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM' } component_test_no_date_time () { msg "build: default config without MBEDTLS_HAVE_TIME_DATE" scripts/config.py unset MBEDTLS_HAVE_TIME_DATE cmake -D CMAKE_BUILD_TYPE:String=Check . make msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites" make test } component_test_platform_calloc_macro () { msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO free CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" make test } component_test_malloc_0_null () { msg "build: malloc(0) returns NULL (ASan+UBSan build)" scripts/config.py full make CC=$ASAN_CC CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"$PWD/tests/configs/user-config-malloc-0-null.h\"' $ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: malloc(0) returns NULL (ASan+UBSan build)" make test msg "selftest: malloc(0) returns NULL (ASan+UBSan build)" # Just the calloc selftest. "make test" ran the others as part of the # test suites. programs/test/selftest calloc msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)" # Run a subset of the tests. The choice is a balance between coverage # and time (including time indirectly wasted due to flaky tests). # The current choice is to skip tests whose description includes # "proxy", which is an approximation of skipping tests that use the # UDP proxy, which tend to be slower and flakier. tests/ssl-opt.sh -e 'proxy' } support_test_aesni () { # Check that gcc targets x86_64 (we can build AESNI), and check for # AESNI support on the host (we can run AESNI). # # The name of this function is possibly slightly misleading, but needs to align # with the name of the corresponding test, component_test_aesni. # # In principle 32-bit x86 can support AESNI, but our implementation does not # support 32-bit x86, so we check for x86-64. # We can only grep /proc/cpuinfo on Linux, so this also checks for Linux (gcc -v 2>&1 | grep Target | grep -q x86_64) && [[ "$HOSTTYPE" == "x86_64" && "$OSTYPE" == "linux-gnu" ]] && (lscpu | grep -qw aes) } component_test_aesni () { # ~ 60s # This tests the two AESNI implementations (intrinsics and assembly), and also the plain C # fallback. It also tests the logic that is used to select which implementation(s) to build. # # This test does not require the host to have support for AESNI (if it doesn't, the run-time # AESNI detection will fallback to the plain C implementation, so the tests will instead # exercise the plain C impl). msg "build: default config with different AES implementations" scripts/config.py set MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY scripts/config.py set MBEDTLS_HAVE_ASM # test the intrinsics implementation msg "AES tests, test intrinsics" make clean make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes' # check that we built intrinsics - this should be used by default when supported by the compiler ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics" # test the asm implementation msg "AES tests, test assembly" make clean make CC=gcc CFLAGS='-Werror -Wall -Wextra -mno-pclmul -mno-sse2 -mno-aes' # check that we built assembly - this should be built if the compiler does not support intrinsics ./programs/test/selftest aes | grep "AESNI code" | grep -q "assembly" # test the plain C implementation scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY msg "AES tests, plain C" make clean make CC=gcc CFLAGS='-O2 -Werror' # check that there is no AESNI code present ./programs/test/selftest aes | not grep -q "AESNI code" not grep -q "AES note: using AESNI" ./programs/test/selftest grep -q "AES note: built-in implementation." ./programs/test/selftest # test the intrinsics implementation scripts/config.py set MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY msg "AES tests, test AESNI only" make clean make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes' ./programs/test/selftest aes | grep -q "AES note: using AESNI" ./programs/test/selftest aes | not grep -q "AES note: built-in implementation." grep -q "AES note: using AESNI" ./programs/test/selftest not grep -q "AES note: built-in implementation." ./programs/test/selftest } component_test_sha3_variations () { msg "sha3 loop unroll variations" # define minimal config sufficient to test SHA3 cat > include/mbedtls/mbedtls_config.h << END #define MBEDTLS_SELF_TEST #define MBEDTLS_SHA3_C END msg "all loops unrolled" make clean make -C tests test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=1 -DMBEDTLS_SHA3_PI_UNROLL=1 -DMBEDTLS_SHA3_CHI_UNROLL=1 -DMBEDTLS_SHA3_RHO_UNROLL=1" ./tests/test_suite_shax msg "all loops rolled up" make clean make -C tests test_suite_shax CFLAGS="-DMBEDTLS_SHA3_THETA_UNROLL=0 -DMBEDTLS_SHA3_PI_UNROLL=0 -DMBEDTLS_SHA3_CHI_UNROLL=0 -DMBEDTLS_SHA3_RHO_UNROLL=0" ./tests/test_suite_shax } support_test_aesni_m32 () { support_test_m32_no_asm && (lscpu | grep -qw aes) } component_test_aesni_m32 () { # ~ 60s # This tests are duplicated from component_test_aesni for i386 target # # AESNI intrinsic code supports i386 and assembly code does not support it. msg "build: default config with different AES implementations" scripts/config.py set MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY scripts/config.py set MBEDTLS_HAVE_ASM # test the intrinsics implementation with gcc msg "AES tests, test intrinsics (gcc)" make clean make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32' # check that we built intrinsics - this should be used by default when supported by the compiler ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics" grep -q "AES note: using AESNI" ./programs/test/selftest grep -q "AES note: built-in implementation." ./programs/test/selftest grep -q "AES note: using VIA Padlock" ./programs/test/selftest grep -q mbedtls_aesni_has_support ./programs/test/selftest scripts/config.py set MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY msg "AES tests, test AESNI only" make clean make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32' ./programs/test/selftest aes | grep -q "AES note: using AESNI" ./programs/test/selftest aes | not grep -q "AES note: built-in implementation." grep -q "AES note: using AESNI" ./programs/test/selftest not grep -q "AES note: built-in implementation." ./programs/test/selftest not grep -q "AES note: using VIA Padlock" ./programs/test/selftest not grep -q mbedtls_aesni_has_support ./programs/test/selftest } support_test_aesni_m32_clang () { # clang >= 4 is required to build with target attributes support_test_aesni_m32 && [[ $(clang_version) -ge 4 ]] } component_test_aesni_m32_clang () { scripts/config.py set MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY scripts/config.py set MBEDTLS_HAVE_ASM # test the intrinsics implementation with clang msg "AES tests, test intrinsics (clang)" make clean make CC=clang CFLAGS='-m32 -Werror -Wall -Wextra' LDFLAGS='-m32' # check that we built intrinsics - this should be used by default when supported by the compiler ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics" grep -q "AES note: using AESNI" ./programs/test/selftest grep -q "AES note: built-in implementation." ./programs/test/selftest grep -q "AES note: using VIA Padlock" ./programs/test/selftest grep -q mbedtls_aesni_has_support ./programs/test/selftest } # For timebeing, no aarch64 gcc available in CI and no arm64 CI node. component_build_aes_aesce_armcc () { msg "Build: AESCE test on arm64 platform without plain C." scripts/config.py baremetal # armc[56] don't support SHA-512 intrinsics scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT # Stop armclang warning about feature detection for A64_CRYPTO. # With this enabled, the library does build correctly under armclang, # but in baremetal builds (as tested here), feature detection is # unavailable, and the user is notified via a #warning. So enabling # this feature would prevent us from building with -Werror on # armclang. Tracked in #7198. scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT scripts/config.py set MBEDTLS_HAVE_ASM msg "AESCE, build with default configuration." scripts/config.py set MBEDTLS_AESCE_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto" msg "AESCE, build AESCE only" scripts/config.py set MBEDTLS_AESCE_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto" } support_build_aes_armce () { # clang >= 11 is required to build with AES extensions [[ $(clang_version) -ge 11 ]] } component_build_aes_armce () { # Test variations of AES with Armv8 crypto extensions scripts/config.py set MBEDTLS_AESCE_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64" make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto" msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm" msg "MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb" scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, aarch64" make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a+crypto" msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, arm" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm" msg "no MBEDTLS_AES_USE_HARDWARE_ONLY, clang, thumb" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb" # test for presence of AES instructions scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY msg "clang, test A32 crypto instructions built" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S" grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o msg "clang, test T32 crypto instructions built" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S" grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o msg "clang, test aarch64 crypto instructions built" make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S" grep -E 'aes[a-z]+\s*[qv]' library/aesce.o # test for absence of AES instructions scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY scripts/config.py unset MBEDTLS_AESCE_C msg "clang, test A32 crypto instructions not built" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S" not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o msg "clang, test T32 crypto instructions not built" make -B library/aesce.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S" not grep -E 'aes[0-9a-z]+.[0-9]\s*[qv]' library/aesce.o msg "clang, test aarch64 crypto instructions not built" make -B library/aesce.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S" not grep -E 'aes[a-z]+\s*[qv]' library/aesce.o } support_build_sha_armce () { # clang >= 4 is required to build with SHA extensions [[ $(clang_version) -ge 4 ]] } component_build_sha_armce () { scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT # Test variations of SHA256 Armv8 crypto extensions scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, aarch64" make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a" msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY clang, arm" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm" scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY # test the deprecated form of the config option scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY msg "MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY clang, thumb" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb" scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY scripts/config.py set MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT msg "MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT clang, aarch64" make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a" scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT # test the deprecated form of the config option scripts/config.py set MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, arm" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -std=c99" msg "MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT clang, thumb" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb" scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT # examine the disassembly for presence of SHA instructions for opt in MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_ONLY MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT; do scripts/config.py set ${opt} msg "${opt} clang, test A32 crypto instructions built" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S" grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o msg "${opt} clang, test T32 crypto instructions built" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S" grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o msg "${opt} clang, test aarch64 crypto instructions built" make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S" grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o scripts/config.py unset ${opt} done # examine the disassembly for absence of SHA instructions msg "clang, test A32 crypto instructions not built" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a72+crypto -marm -S" not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o msg "clang, test T32 crypto instructions not built" make -B library/sha256.o CC=clang CFLAGS="--target=arm-linux-gnueabihf -mcpu=cortex-a32+crypto -mthumb -S" not grep -E 'sha256[a-z0-9]+.32\s+[qv]' library/sha256.o msg "clang, test aarch64 crypto instructions not built" make -B library/sha256.o CC=clang CFLAGS="--target=aarch64-linux-gnu -march=armv8-a -S" not grep -E 'sha256[a-z0-9]+\s+[qv]' library/sha256.o } # For timebeing, no VIA Padlock platform available. component_build_aes_via_padlock () { msg "AES:VIA PadLock, build with default configuration." scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS" grep -q mbedtls_padlock_has_support ./programs/test/selftest } support_build_aes_via_padlock_only () { ( [ "$MBEDTLS_TEST_PLATFORM" == "Linux-x86_64" ] || \ [ "$MBEDTLS_TEST_PLATFORM" == "Linux-amd64" ] ) && \ [ "`dpkg --print-foreign-architectures`" == "i386" ] } support_build_aes_aesce_armcc () { support_build_armcc } component_test_aes_only_128_bit_keys () { msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH" scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH scripts/config.py unset MBEDTLS_PADLOCK_C make CFLAGS='-O2 -Werror -Wall -Wextra' msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH" make test } component_test_no_ctr_drbg_aes_only_128_bit_keys () { msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C" scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_PADLOCK_C make CC=clang CFLAGS='-Werror -Wall -Wextra' msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C" make test } component_test_aes_only_128_bit_keys_have_builtins () { msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C" scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AESCE_C make CFLAGS='-O2 -Werror -Wall -Wextra' msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C" make test msg "selftest: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C" programs/test/selftest } component_test_gcm_largetable () { msg "build: default config + GCM_LARGE_TABLE - AESNI_C - AESCE_C" scripts/config.py set MBEDTLS_GCM_LARGE_TABLE scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AESCE_C make CFLAGS='-O2 -Werror -Wall -Wextra' msg "test: default config - GCM_LARGE_TABLE - AESNI_C - AESCE_C" make test } component_test_aes_fewer_tables () { msg "build: default config with AES_FEWER_TABLES enabled" scripts/config.py set MBEDTLS_AES_FEWER_TABLES make CFLAGS='-O2 -Werror -Wall -Wextra' msg "test: AES_FEWER_TABLES" make test } component_test_aes_rom_tables () { msg "build: default config with AES_ROM_TABLES enabled" scripts/config.py set MBEDTLS_AES_ROM_TABLES make CFLAGS='-O2 -Werror -Wall -Wextra' msg "test: AES_ROM_TABLES" make test } component_test_aes_fewer_tables_and_rom_tables () { msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled" scripts/config.py set MBEDTLS_AES_FEWER_TABLES scripts/config.py set MBEDTLS_AES_ROM_TABLES make CFLAGS='-O2 -Werror -Wall -Wextra' msg "test: AES_FEWER_TABLES + AES_ROM_TABLES" make test } # helper for common_block_cipher_no_decrypt() which: # - enable/disable the list of config options passed from -s/-u respectively. # - build # - test for tests_suite_xxx # - selftest # # Usage: helper_block_cipher_no_decrypt_build_test # [-s set_opts] [-u unset_opts] [-c cflags] [-l ldflags] [option [...]] # Options: -s set_opts the list of config options to enable # -u unset_opts the list of config options to disable # -c cflags the list of options passed to CFLAGS # -l ldflags the list of options passed to LDFLAGS helper_block_cipher_no_decrypt_build_test () { while [ $# -gt 0 ]; do case "$1" in -s) shift; local set_opts="$1";; -u) shift; local unset_opts="$1";; -c) shift; local cflags="-Werror -Wall -Wextra $1";; -l) shift; local ldflags="$1";; esac shift done set_opts="${set_opts:-}" unset_opts="${unset_opts:-}" cflags="${cflags:-}" ldflags="${ldflags:-}" [ -n "$set_opts" ] && echo "Enabling: $set_opts" && scripts/config.py set-all $set_opts [ -n "$unset_opts" ] && echo "Disabling: $unset_opts" && scripts/config.py unset-all $unset_opts msg "build: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}" make clean make CFLAGS="-O2 $cflags" LDFLAGS="$ldflags" # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA not grep mbedtls_aes_setkey_dec library/aes.o not grep mbedtls_aria_setkey_dec library/aria.o not grep mbedtls_camellia_setkey_dec library/camellia.o # Make sure we don't have mbedtls_internal_aes_decrypt in AES not grep mbedtls_internal_aes_decrypt library/aes.o # Make sure we don't have mbedtls_aesni_inverse_key in AESNI not grep mbedtls_aesni_inverse_key library/aesni.o msg "test: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}" make test msg "selftest: default config + BLOCK_CIPHER_NO_DECRYPT${set_opts:+ + $set_opts}${unset_opts:+ - $unset_opts} with $cflags${ldflags:+, $ldflags}" programs/test/selftest } # This is a common configuration function used in: # - component_test_block_cipher_no_decrypt_aesni_legacy() # - component_test_block_cipher_no_decrypt_aesni_use_psa() # in order to test BLOCK_CIPHER_NO_DECRYPT with AESNI intrinsics, # AESNI assembly and AES C implementation on x86_64 and with AESNI intrinsics # on x86. common_block_cipher_no_decrypt () { # test AESNI intrinsics helper_block_cipher_no_decrypt_build_test \ -s "MBEDTLS_AESNI_C" \ -c "-mpclmul -msse2 -maes" # test AESNI assembly helper_block_cipher_no_decrypt_build_test \ -s "MBEDTLS_AESNI_C" \ -c "-mno-pclmul -mno-sse2 -mno-aes" # test AES C implementation helper_block_cipher_no_decrypt_build_test \ -u "MBEDTLS_AESNI_C" # test AESNI intrinsics for i386 target helper_block_cipher_no_decrypt_build_test \ -s "MBEDTLS_AESNI_C" \ -c "-m32 -mpclmul -msse2 -maes" \ -l "-m32" } # This is a configuration function used in component_test_block_cipher_no_decrypt_xxx: # usage: 0: no PSA crypto configuration # 1: use PSA crypto configuration config_block_cipher_no_decrypt () { use_psa=$1 scripts/config.py set MBEDTLS_BLOCK_CIPHER_NO_DECRYPT scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS scripts/config.py unset MBEDTLS_DES_C scripts/config.py unset MBEDTLS_NIST_KW_C if [ "$use_psa" -eq 1 ]; then # Enable support for cryptographic mechanisms through the PSA API. # Note: XTS, KW are not yet supported via the PSA API in Mbed TLS. scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_NO_PADDING scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CBC_PKCS7 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_DES fi } component_test_block_cipher_no_decrypt_aesni () { # This consistently causes an llvm crash on clang 3.8, so use gcc export CC=gcc config_block_cipher_no_decrypt 0 common_block_cipher_no_decrypt } component_test_block_cipher_no_decrypt_aesni_use_psa () { # This consistently causes an llvm crash on clang 3.8, so use gcc export CC=gcc config_block_cipher_no_decrypt 1 common_block_cipher_no_decrypt } support_test_block_cipher_no_decrypt_aesce_armcc () { support_build_armcc } component_test_block_cipher_no_decrypt_aesce_armcc () { scripts/config.py baremetal # armc[56] don't support SHA-512 intrinsics scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT # Stop armclang warning about feature detection for A64_CRYPTO. # With this enabled, the library does build correctly under armclang, # but in baremetal builds (as tested here), feature detection is # unavailable, and the user is notified via a #warning. So enabling # this feature would prevent us from building with -Werror on # armclang. Tracked in #7198. scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT scripts/config.py set MBEDTLS_HAVE_ASM config_block_cipher_no_decrypt 1 # test AESCE baremetal build scripts/config.py set MBEDTLS_AESCE_C msg "build: default config + BLOCK_CIPHER_NO_DECRYPT with AESCE" armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto -Werror -Wall -Wextra" # Make sure we don't have mbedtls_xxx_setkey_dec in AES/ARIA/CAMELLIA not grep mbedtls_aes_setkey_dec library/aes.o not grep mbedtls_aria_setkey_dec library/aria.o not grep mbedtls_camellia_setkey_dec library/camellia.o # Make sure we don't have mbedtls_internal_aes_decrypt in AES not grep mbedtls_internal_aes_decrypt library/aes.o # Make sure we don't have mbedtls_aesce_inverse_key and aesce_decrypt_block in AESCE not grep mbedtls_aesce_inverse_key library/aesce.o not grep aesce_decrypt_block library/aesce.o } component_test_ctr_drbg_aes_256_sha_256 () { msg "build: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" make test } component_test_ctr_drbg_aes_128_sha_512 () { msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)" make test } component_test_ctr_drbg_aes_128_sha_256 () { msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" make test } component_test_se_default () { msg "build: default config + MBEDTLS_PSA_CRYPTO_SE_C" scripts/config.py set MBEDTLS_PSA_CRYPTO_SE_C make CC=clang CFLAGS="$ASAN_CFLAGS -Os" LDFLAGS="$ASAN_CFLAGS" msg "test: default config + MBEDTLS_PSA_CRYPTO_SE_C" make test } component_test_psa_crypto_drivers () { msg "build: full + test drivers dispatching to builtins" scripts/config.py full scripts/config.py unset MBEDTLS_PSA_CRYPTO_CONFIG loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL" loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" loc_cflags="${loc_cflags} -I../tests/include -O2" make CC=$ASAN_CC CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS" msg "test: full + test drivers dispatching to builtins" make test } component_build_mbedtls_config_file () { msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s scripts/config.py -w full_config.h full echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H" make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'" # Make sure this feature is enabled. We'll disable it in the next phase. programs/test/query_compile_time_config MBEDTLS_NIST_KW_C make clean msg "build: make with MBEDTLS_CONFIG_FILE + MBEDTLS_USER_CONFIG_FILE" # In the user config, disable one feature (for simplicity, pick a feature # that nothing else depends on). echo '#undef MBEDTLS_NIST_KW_C' >user_config.h make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"' -DMBEDTLS_USER_CONFIG_FILE='\"user_config.h\"'" not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C rm -f user_config.h full_config.h } component_build_psa_config_file () { msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE" # ~40s scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG cp "$CRYPTO_CONFIG_H" psa_test_config.h echo '#error "MBEDTLS_PSA_CRYPTO_CONFIG_FILE is not working"' >"$CRYPTO_CONFIG_H" make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"'" # Make sure this feature is enabled. We'll disable it in the next phase. programs/test/query_compile_time_config MBEDTLS_CMAC_C make clean msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE + MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE" # ~40s # In the user config, disable one feature and its dependencies, which will # reflect on the mbedtls configuration so we can query it with # query_compile_time_config. echo '#undef PSA_WANT_ALG_CMAC' >psa_user_config.h echo '#undef PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128' >> psa_user_config.h scripts/config.py unset MBEDTLS_CMAC_C make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"' -DMBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE='\"psa_user_config.h\"'" not programs/test/query_compile_time_config MBEDTLS_CMAC_C rm -f psa_test_config.h psa_user_config.h } component_build_psa_alt_headers () { msg "build: make with PSA alt headers" # ~20s # Generate alternative versions of the substitutable headers with the # same content except different include guards. make -C tests include/alt-extra/psa/crypto_platform_alt.h include/alt-extra/psa/crypto_struct_alt.h # Build the library and some programs. # Don't build the fuzzers to avoid having to go through hoops to set # a correct include path for programs/fuzz/Makefile. make CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" lib make -C programs -o fuzz CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" # Check that we're getting the alternative include guards and not the # original include guards. programs/test/query_included_headers | grep -x PSA_CRYPTO_PLATFORM_ALT_H programs/test/query_included_headers | grep -x PSA_CRYPTO_STRUCT_ALT_H programs/test/query_included_headers | not grep -x PSA_CRYPTO_PLATFORM_H programs/test/query_included_headers | not grep -x PSA_CRYPTO_STRUCT_H } component_test_m32_no_asm () { # Build without assembly, so as to use portable C code (in a 32-bit # build) and not the i386-specific inline assembly. # # Note that we require gcc, because clang Asan builds fail to link for # this target (cannot find libclang_rt.lsan-i386.a - this is a known clang issue). msg "build: i386, make, gcc, no asm (ASan build)" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32 make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, make, gcc, no asm (ASan build)" make test } support_test_m32_no_asm () { case $(uname -m) in amd64|x86_64) true;; *) false;; esac } component_test_m32_o2 () { # Build with optimization, to use the i386 specific inline assembly # and go faster for tests. msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32 make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, make, gcc -O2 (ASan build)" make test msg "test ssl-opt.sh, i386, make, gcc-O2" tests/ssl-opt.sh } support_test_m32_o2 () { support_test_m32_no_asm "$@" } component_test_m32_everest () { msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED scripts/config.py unset MBEDTLS_AESNI_C # AESNI for 32-bit is tested in test_aesni_m32 make CC=gcc CFLAGS="$ASAN_CFLAGS -m32" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA' } support_test_m32_everest () { support_test_m32_no_asm "$@" } component_test_mx32 () { msg "build: 64-bit ILP32, make, gcc" # ~ 30s scripts/config.py full make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -mx32' LDFLAGS='-mx32' msg "test: 64-bit ILP32, make, gcc" make test } support_test_mx32 () { case $(uname -m) in amd64|x86_64) true;; *) false;; esac } component_test_min_mpi_window_size () { msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s scripts/config.py set MBEDTLS_MPI_WINDOW_SIZE 1 CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s make test } component_test_have_int32 () { msg "build: gcc, force 32-bit bignum limbs" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32' msg "test: gcc, force 32-bit bignum limbs" make test } component_test_have_int64 () { msg "build: gcc, force 64-bit bignum limbs" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C make CC=gcc CFLAGS='-O2 -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64' msg "test: gcc, force 64-bit bignum limbs" make test } component_test_have_int32_cmake_new_bignum () { msg "build: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C scripts/config.py set MBEDTLS_TEST_HOOKS scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT make CC=gcc CFLAGS="$ASAN_CFLAGS -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32" LDFLAGS="$ASAN_CFLAGS" msg "test: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)" make test } component_test_no_udbl_division () { msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s scripts/config.py full scripts/config.py set MBEDTLS_NO_UDBL_DIVISION make CFLAGS='-Werror -O1' msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s make test } component_test_no_64bit_multiplication () { msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s scripts/config.py full scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION make CFLAGS='-Werror -O1' msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s make test } component_test_no_strings () { msg "build: no strings" # ~10s scripts/config.py full # Disable options that activate a large amount of string constants. scripts/config.py unset MBEDTLS_DEBUG_C scripts/config.py unset MBEDTLS_ERROR_C scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY scripts/config.py unset MBEDTLS_VERSION_FEATURES make CFLAGS='-Werror -Os' msg "test: no strings" # ~ 10s make test } component_test_no_x509_info () { msg "build: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s scripts/config.pl full scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests scripts/config.pl set MBEDTLS_X509_REMOVE_INFO make CFLAGS='-Werror -O2' msg "test: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s make test msg "test: ssl-opt.sh, full + MBEDTLS_X509_REMOVE_INFO" # ~ 1 min tests/ssl-opt.sh } component_build_arm_none_eabi_gcc () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" # ~ 10s scripts/config.py baremetal make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -O1' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o } component_build_arm_linux_gnueabi_gcc_arm5vte () { msg "build: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s scripts/config.py baremetal # Build for a target platform that's close to what Debian uses # for its "armel" distribution (https://wiki.debian.org/ArmEabiPort). # See https://github.com/Mbed-TLS/mbedtls/pull/2169 and comments. # Build everything including programs, see for example # https://github.com/Mbed-TLS/mbedtls/pull/3449#issuecomment-675313720 make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' msg "size: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug" ${ARM_LINUX_GNUEABI_GCC_PREFIX}size -t library/*.o } support_build_arm_linux_gnueabi_gcc_arm5vte () { type ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc >/dev/null 2>&1 } component_build_arm_none_eabi_gcc_arm5vte () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s scripts/config.py baremetal # This is an imperfect substitute for # component_build_arm_linux_gnueabi_gcc_arm5vte # in case the gcc-arm-linux-gnueabi toolchain is not available make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-std=c99 -Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug" ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o } component_build_arm_none_eabi_gcc_m0plus () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus, baremetal_size" # ~ 10s scripts/config.py baremetal_size make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os, baremetal_size" ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o for lib in library/*.a; do echo "$lib:" ${ARM_NONE_EABI_GCC_PREFIX}size -t $lib | grep TOTALS done } component_build_arm_none_eabi_gcc_no_udbl_division () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s scripts/config.py baremetal scripts/config.py set MBEDTLS_NO_UDBL_DIVISION make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra' lib echo "Checking that software 64-bit division is not required" not grep __aeabi_uldiv library/*.o } component_build_arm_none_eabi_gcc_no_64bit_multiplication () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s scripts/config.py baremetal scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -O1 -march=armv6-m -mthumb' lib echo "Checking that software 64-bit multiplication is not required" not grep __aeabi_lmul library/*.o } component_build_arm_clang_thumb () { # ~ 30s scripts/config.py baremetal msg "build: clang thumb 2, make" make clean make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -march=armv7-m -mthumb' lib # Some Thumb 1 asm is sensitive to optimisation level, so test both -O0 and -Os msg "build: clang thumb 1 -O0, make" make clean make CC="clang" CFLAGS='-std=c99 -Werror -O0 --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib msg "build: clang thumb 1 -Os, make" make clean make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib } component_build_armcc () { msg "build: ARM Compiler 5" scripts/config.py baremetal # armc[56] don't support SHA-512 intrinsics scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT # older versions of armcc/armclang don't support AESCE_C on 32-bit Arm scripts/config.py unset MBEDTLS_AESCE_C # Stop armclang warning about feature detection for A64_CRYPTO. # With this enabled, the library does build correctly under armclang, # but in baremetal builds (as tested here), feature detection is # unavailable, and the user is notified via a #warning. So enabling # this feature would prevent us from building with -Werror on # armclang. Tracked in #7198. scripts/config.py unset MBEDTLS_SHA256_USE_ARMV8_A_CRYPTO_IF_PRESENT scripts/config.py set MBEDTLS_HAVE_ASM make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib msg "size: ARM Compiler 5" "$ARMC5_FROMELF" -z library/*.o # Compile mostly with -O1 since some Arm inline assembly is disabled for -O0. # ARM Compiler 6 - Target ARMv7-A armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a" # ARM Compiler 6 - Target ARMv7-M armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m" # ARM Compiler 6 - Target ARMv7-M+DSP armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp" # ARM Compiler 6 - Target ARMv8-A - AArch32 armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a" # ARM Compiler 6 - Target ARMv8-M armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main" # ARM Compiler 6 - Target Cortex-M0 - no optimisation armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0" # ARM Compiler 6 - Target Cortex-M0 armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0" # ARM Compiler 6 - Target ARMv8.2-A - AArch64 # # Re-enable MBEDTLS_AESCE_C as this should be supported by the version of armclang # that we have in our CI scripts/config.py set MBEDTLS_AESCE_C armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto" } support_build_armcc () { armc5_cc="$ARMC5_BIN_DIR/armcc" armc6_cc="$ARMC6_BIN_DIR/armclang" (check_tools "$armc5_cc" "$armc6_cc" > /dev/null 2>&1) } component_test_tls12_only () { msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_3, cmake, gcc, ASan" scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (ASan build)" make test msg "test: ssl-opt.sh (ASan build)" tests/ssl-opt.sh msg "test: compat.sh (ASan build)" tests/compat.sh } component_test_tls13_only () { msg "build: default config without MBEDTLS_SSL_PROTO_TLS1_2" scripts/config.py set MBEDTLS_SSL_EARLY_DATA scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test: TLS 1.3 only, all key exchange modes enabled" make test msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled" tests/ssl-opt.sh } component_test_tls13_only_psk () { msg "build: TLS 1.3 only from default, only PSK key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_DHM_C scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled" tests/ssl-opt.sh } component_test_tls13_only_ephemeral () { msg "build: TLS 1.3 only from default, only ephemeral key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_ephemeral_ffdh () { msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_EARLY_DATA scripts/config.py unset MBEDTLS_ECDH_C make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_psk_ephemeral () { msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_psk_ephemeral_ffdh () { msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA scripts/config.py unset MBEDTLS_ECDH_C make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_psk_all () { msg "build: TLS 1.3 only from default, without ephemeral key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes" tests/ssl-opt.sh } component_test_tls13_only_ephemeral_all () { msg "build: TLS 1.3 only from default, without PSK key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes" tests/ssl-opt.sh } component_test_tls13_no_padding () { msg "build: default config plus early data minus padding" scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1 scripts/config.py set MBEDTLS_SSL_EARLY_DATA CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: default config plus early data minus padding" make test msg "ssl-opt.sh (TLS 1.3 no padding)" tests/ssl-opt.sh } component_test_tls13_no_compatibility_mode () { msg "build: default config plus early data minus middlebox compatibility mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE scripts/config.py set MBEDTLS_SSL_EARLY_DATA CC=$ASAN_CC cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: default config plus early data minus middlebox compatibility mode" make test msg "ssl-opt.sh (TLS 1.3 no compatibility mode)" tests/ssl-opt.sh } component_test_full_minus_session_tickets () { msg "build: full config without session tickets" scripts/config.py full scripts/config.py unset MBEDTLS_SSL_SESSION_TICKETS scripts/config.py unset MBEDTLS_SSL_EARLY_DATA CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full config without session tickets" make test msg "ssl-opt.sh (full config without session tickets)" tests/ssl-opt.sh } component_test_memsan () { msg "build: MSan (clang)" # ~ 1 min 20s scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (MSan)" # ~ 10s make test msg "test: metatests (MSan)" tests/scripts/run-metatests.sh any msan msg "program demos (MSan)" # ~20s tests/scripts/run_demos.py msg "test: ssl-opt.sh (MSan)" # ~ 1 min tests/ssl-opt.sh # Optional part(s) if [ "$MEMORY" -gt 0 ]; then msg "test: compat.sh (MSan)" # ~ 6 min 20s tests/compat.sh fi } component_release_test_valgrind () { msg "build: Release (clang)" # default config, in particular without MBEDTLS_USE_PSA_CRYPTO CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release . make msg "test: main suites, Valgrind (default config)" make memcheck # Optional parts (slow; currently broken on OS X because programs don't # seem to receive signals under valgrind on OS X). # These optional parts don't run on the CI. if [ "$MEMORY" -gt 0 ]; then msg "test: ssl-opt.sh --memcheck (default config)" tests/ssl-opt.sh --memcheck fi if [ "$MEMORY" -gt 1 ]; then msg "test: compat.sh --memcheck (default config)" tests/compat.sh --memcheck fi if [ "$MEMORY" -gt 0 ]; then msg "test: context-info.sh --memcheck (default config)" tests/context-info.sh --memcheck fi } component_release_test_valgrind_psa () { msg "build: Release, full (clang)" # full config, in particular with MBEDTLS_USE_PSA_CRYPTO scripts/config.py full CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release . make msg "test: main suites, Valgrind (full config)" make memcheck } component_test_psa_compliance () { # The arch tests build with gcc, so require use of gcc here to link properly msg "build: make, default config (out-of-box), libmbedcrypto.a only" CC=gcc make -C library libmbedcrypto.a msg "unit test: test_psa_compliance.py" CC=gcc ./tests/scripts/test_psa_compliance.py } support_test_psa_compliance () { # psa-compliance-tests only supports CMake >= 3.10.0 ver="$(cmake --version)" ver="${ver#cmake version }" ver_major="${ver%%.*}" ver="${ver#*.}" ver_minor="${ver%%.*}" [ "$ver_major" -eq 3 ] && [ "$ver_minor" -ge 10 ] }