In component_test_no_hmac_drbg, the fact that HMAC_DRBG is disabled
doesn't affect the SSL code, but the fact that deterministic ECDSA is
disabled does. So run some ECDSA-related SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support HMAC_DRBG in ssl_client2 and ssl_server2, in addition to
CTR_DRBG. CTR_DRBG is still used if present, but it's now possible to
run the SSL test programs with CTR_DRBG disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
- following the removal of the RSA_VALIDATE_RET() to check
the salt length, this test is not necessary/required anymore
- negative salt length are caught later in the function
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
- removed the check on saltlen > 0 and added tests
positive test cases for this.
- added negative test cases when even saltlen == 0
is not enough. This allowed to uncover an underflow bu
in the slen check (when olen-slen-2 is negative)
- fixed the saltlen check to avoid underflow
- added more test cases where saltlen is the maximum
possible value and one above the maximum possible value
(different hash, different key size)
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
TEST_ASSERT jumps to the exit label, so it must not be called from
cleanup code executed after the exit label. It's legitimate (and
indeed very common) to call PSA_DONE in cleanup code, so PSA_DONE must
not jump to exit.
Define an auxiliary function test_fail_if_psa_leaking() that calls
test_fail() with the error message provided by
mbedtls_test_helper_is_psa_leaking(). This function currently needs to
be in helpers.function rather than in a PSA-specific helper file
because it calls test_fail which is defined in helpers.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't microoptimize memory usage in tests: use separate buffers for
the input and the output. Allocate the input buffer dynamically
because the size is a parameter of the test case. Allocate the output
buffer dynamically because it's generally good practice in tests so
that a memory sanitizer can detect a buffer overflow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When verifying the impact of a forced RNG failure, depend on the built-in
implementation of the algorithm that uses randomization, whether it's
because the algorithm is randomized or because our implementation uses
randomization for (e.g.) blinding. An external implementation could use
its own randomness source which is not affected by the forced failure of
the RNG driver.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Under MBEDTLS_ERR_RSA_RNG_FAILED, add tests where the random generator
failed. This commit tests the following operations:
* psa_generate_random()
* psa_generate_key() for a symmetric key
* Deterministic signatures that use blinding (RSA PKCS#1v1.5,
deterministic ECDSA).
* Randomized signatures (RSA PSS, randomized ECDSA).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To reduce the risk of people accidentally using the test
implementation of mbedtls_psa_external_get_random(), which is
insecure, require the user to explicitly call
mbedtls_test_enable_insecure_external_rng() first.
Disabling the test implementation of mbedtls_psa_external_get_random()
will also allow negative testing for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG,
which will be added in a subsequent commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Include psa_crypto_helpers.h automatically if MBEDTLS_PSA_CRYPTO_C is
enabled, like helpers.h is included automatically.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_crypto_helpers.h no longer defines static functions, so it can be
included anywhere without worrying about unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`tests/scripts/all.sh test_psa_collect_statuses` calls
`tests/scripts/psa_collect_statuses.py` which calls
`make -DRECORD_PSA_STATUS_COVERAGE_LOG` which must generate
`include/test/instrument_record_status.h`.
With the refactoring of `psa_crypto_helpers.{h,c}`, this now
needs to be done before building `psa_crypto_helpers.c`.
Also, remove `include/test/instrument_record_status.h` unconditionally
in `make clean`, which helps keep the build tree clean.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move function definitions from psa_crypto_helpers.h to
psa_crypto_helpers.c.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Refactor some PSA test helper functions and macros to avoid depending
on test_info and test_fail inside functions. These identifiers are
only defined in helpers.function, so they're only available in test
suites, and not in test helper modules (tests/src/*.c) which are also
linked into example programs.
This is in preparation for moving function definitions from
psa_crypto_helpers.h to psa_crypto_helpers.c.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since 349eadc58faff851ee8dcbb43c702f0ddecfcbb8, test_fail() reports
the first failure. So it's safe to call test_fail() again to report a
cleanup failure when we don't want to potentially erase information
about an earlier failure.
The behavior of mbedtls_test_helper_is_psa_pristine() changes if
test_info.result was neither TEST_RESULT_SUCCESS nor
TEST_RESULT_FAILED, but this should not matter since a skipped test
should not cause mbedtls_test_helper_is_psa_pristine() to fail.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
With just the option --can-pylint or --can-mypy, check whether the
requisite tool is available with an acceptable version and exit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mypy automatically checks the modules when it encounters them as
imports. Don't make it check them twice, because it would complain
about encountering them through different paths (via the command line
as scripts/mbedtls_dev/*.py and via imports as just mbedtls_dev/*.py).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test suite assumed that if SHA512 was enabled, then
SHA384 was also available. This is not true. There is
config MBEDTLS_SHA512_NO_SHA384 which allows precisely
to add SHA512 and not SHA384.
This commits adds the necessary `depends_on` clause,
to avoid running the SHA384 tests when config
MBEDTLS_SHA512_NO_SHA384 is set.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
- all positibe test cases were sampled from the CAVP test suite
(SigGenPSS_186-2.txt, SigGenPSS_186-3.txt)
Only kept one representative for each triple (modlen, sha, saltlen)
- two extra test cases were added to cover the maximum salt length
(slen=olen-slen-2 and slen=(olen-slen-2)-1)
- in rsa.c, the salt intermediate buffer was too small to cover cases
where slen > hlen. So reworked the code to generate the salt in the
encoded message directly. This has the advantage to remove a memcpy
and a memset.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
Make it clear that this is an abstraction of the random generator
abstraction, and not an abstraction of the PSA random generator.
mbedtls_psa_get_random and MBEDTLS_PSA_RANDOM_STATE are public-facing
definitions and will be moved in a subsequent commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a directory mbedtls_dev intended to contain various Python
module for use by Python scripts located anywhere in the Mbed TLS
source tree.
Move get_c_expression_values and its auxiliary functions into a new
Python module mbedtls_dev.c_build_helper.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generalize the very ad hoc run_c function into a function to generate
a C program to print the value of a list of expressions. Refactor the
code into several functions to make it more manageable.
No intended behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Allow Python scripts in tests/scripts to import modules located in the
scripts directory. To do this, use
```
import scripts_path # pylint: disable=unused-import
```
Declare the scripts directory to pylint and to mypy.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since no typing stubs are available for mbed_host_tests.py, mypy
errors out on mbedtls_test.py with
error: Skipping analyzing 'mbed_host_tests': found module but no type hints or library stubs
Ignore this import to get at least some benefit from mypy without
spending significant effort to write stubs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add enough type annotations to pass mypy 0.782 with Python 3.5. The
source code will still run normally under older Python versions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Executable scripts must have shebang (#!) line to be effectively
executable on most Unix-like systems. Enforce this, and conversely
enforce that files with a shebang line are executable.
Check that the specified interperter is consistent with the file
extension.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Executed ./scripts/bump_version.sh --version 2.25.0 --so-crypto 6
Increasing the SO version of the crypto library, because the openless
API improvement came with API/ABI incompatibilities. For example
- the size of psa_key_handle_t changed
- the type of a parameter in 18 public functions has changed from
psa_key_handle_t to mbedtls_svc_key_id_t
Signed-off-by: Janos Follath <janos.follath@arm.com>
