This problem would appear to have only affected systems with multiple
interfaces. It was noted causing tcp resets when the pcb was lost, and there
might have been other associated problems.
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
There were a couple cases in-between that could cause an exit from
tcp_output which don't use useg. With large send buffers, pcb->unacked
may be large and calculating useg is wasted in these exit cases
Some compilers may be re-ordering this already, but it doesn't hurt to
correctly arrange the code
This re-works the persist timer to have the following behavior:
1) Only start persist timer when a buffered segment doesn't fit within
the current window and there is no in-fligh data. Previously, the
persist timer was always started when the window went to zero even
if there was no buffered data (since timer was managed in receive
pathway rather than transmit pathway)
2) Upon first fire of persist timer, fill the remaining window if
non-zero by splitting the unsent segment. If split segment is sent,
persist timer is stopped, RTO timer is now ensuring reliable window
updates
3) If window is already zero when persist timer fires, send 1 byte probe
4) Persist timer and zero window probe should only be active when the
following are true:
* no in-flight data (pcb->unacked == NULL)
* when there is buffered data (pcb->unsent != NULL)
* when pcb->unsent->len > pcb->snd_wnd
netif_get_by_index() returns NULL if idx is NETIF_NO_INDEX.
So remove the superfluous NETIF_NO_INDEX checking for msg->msg.jl.if_idx
before calling netif_get_by_index().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
Interface indexes are u8_t internally so cast from sockets int representation to u8_t
This was found with MSVC 2013:
1>lwip\src\api\sockets.c(3190): warning C4242: 'function' : conversion from 'const unsigned int' to 'u8_t', possible loss of data
1>lwip\src\api\sockets.c(3698): warning C4242: 'function' : conversion from 'unsigned int' to 'u8_t', possible loss of data
lwip_itoa would output the number 0 as \0. This fixes the issue by
adding a special check before the normal conversion loop
This was found via shell cmd idxtoname and win32 port. "lo0" should
be returned for index 1
- add a better-documented static function tcp_output_segment_busy
- try to reduce the number of checks
- tcp_rexmit_rto: iterate pcb->unacked only once
- no need to check for ref==1 in tcp_rexmit_fast when tcp_rexmit does
- call tcp_rexmit_fast if dupacks >= 3 (not == 3) and use TF_INFR flag to guard the fast-rexmit case (that way, it's triggered again on the next dupack)
There is already a guard in tcp_output_segment() for a pbuf still being
referenced by the netif driver due to deferred transmission, however the callers
are modifying state even when this gives up.
It seems cleaner to have the callers guard this case and avoid modifying their
state.
tcp_rexmit_rto() might better avoid re-transmission of any segments if any of
the unacked segments are deferred, to avoid loading the link further if it is
struggling to flush its buffered writes. Link level queues can be limited on
some devices and need spares for link management.
- added `altcp_tls_free_config()`.
- added `altcp_tls_context()` function to allow mbedtls parameter tweak.
Since state structure isn't exported, this allow application to get
internal context (port dependent) to tweak it.
- free altcp_pcb when lower error callback called.
- expose `altcp_tcp_setup()` so we can wrap altcp over existing tcp pcb.
- avoid calling tcp_close() with NULL pcb.
- free altcp_pcb struct when error callback called.
According to `mqtt_tcp_err_cb()` in src/apps/mqtt/mqtt.c, altcp socket should
work the same way than raw tcp socket. So freeing altcp_pcb ensure this.
The new functions both take size_t as increment/decrement argument instead of s16_t (which needed to be range-checked before conversion everywhere) - in most places, the direction (increment or decrement) is known anyway, so no need to encode it in a sign bit
In tcp_output() there were a number of blocks of code performing
duplicate checks of 'if (seg == NULL)'. This combines them together
to reduce duplicate checks
TCP_OUTPUT_DEBUG and TCP_CWND_DEBUG also don't need to be guarded
by #if/#endif since the LWIP_DEBUGF infrastructure already compiles them
out when LWIP_DEBUG is not defined
The ip6_frag.drop counter is updated before all the code paths calling
goto nullreturn, so let's move updating ip6_frag.drop stats to nullreturn.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
This fixes a couple of occurrences where the src and dst parameters to
ip4_route_src() were swapped. This was most likely due to confusion between
ip_route(src, dst) and ip4_route_src(dst, src)
This was found in a system where LWIP_IPV4_SRC_ROUTING is 0
The UDP case was an application socket bound to INADDR_ANY with
IP_MULTICAST_IF set. Transmits would result in calling ip4_route(dst) where
dst was pcb->local_addr (which was INADDR_ANY) instead of pcb->mcast_ip4.
This resulted in a routing failure
The ICMP issue was found through code analysis only
There were uses of dhcp_release() followed immediately by dhcp_discover() but
dhcp_release() now stops dhcp so discovery would fail, so call dhcp_start()
after release which restarts discovery.
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
According to commit 1f780e86d5 ("PPP timeouts required depend on the number of allowed PPP sessions"):
Per PPP needs 6 timeouts (AUTH + PAP|CHAP|EAP + LCP + IPCP + IP6CP + PPPoE).
So update the minimal MEMP_NUM_SYS_TIMEOUT setting check accordingly.
Since we have LWIP_NUM_SYS_TIMEOUT_INTERNAL so just switch to use it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
This refactors event_callback() to separate updating socket event
state from processing the select list (to apply socket event change)
Refactoring changes:
1) select_list_cb processing has been moved to a new local function called
select_check_waiters()
2) goto no_select_wakeup has been removed and now we use a flag
to track whether to call select_check_waiters()
3) There is a small functional change for !LWIP_TCPIP_CORE_LOCKING.
We call SYS_ARCH_UNPROTECT after saving events but before calling
select_check_waiters() (which now calls PROTECT before starting the loop).
Before the code held the PROTECT across saving the events and the first
loop iteration, but this didn't protect against anything because each loop
iteration we do an UNPROTECT/PROTECT
4) Better documentation for both LWIP_TCPIP_CORE_LOCKING and
!LWIP_TCPIP_CORE_LOCKING
These are now defined to return != SYS_ARCH_TIMEOUT on success rather than the time
waiting. The returned times were unused by lwip and this simplifies at
least some implementations.
Signed-off-by: goldsimon <goldsimon@gmx.de>
This fixes a bug where when writing IP_PKTINFO to msg_control, the
msg_controllen field was not updated with the length written
This bug is exposed by applications that provide a msg_control buffer large
enough for multiple control messages. Then when calling CMSG_NXTHDR, it
returned a next cmsg pointer even though was no additional message
The ip6_addr_t structure may have an addition slot so is not necessarily
the size of an ipv6 address, so some uses of sizeof(ip6_addr_t) were not
correct.
Signed-off-by: goldsimon <goldsimon@gmx.de>
No need to have additional if statement for PBUF_REF/PBUF_ROM.
It can be merged to the existing swtich(type) cases.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Adds partial support for selective acknowledgements (RFC 2018).
This change makes lwIP negotiate SACK support, and include SACK
data in outgoing empty ACK packets. It does not include it
in outgoing packets with data payload.
It also does not add support for handling incoming SACKs.
Signed-off-by: goldsimon <goldsimon@gmx.de>
Use vj_uncompress_err() instead of duplicating the same code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
Current code does not correctly update ifoutoctets counter because nb->tot_len
is always 0. Fix it by setting nb->tot_len to actual payload length so we can
update ifoutoctets correctly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
This changes tcpflags_t to be a u16_t for all cases. The TCP Appropriate
Byte Count support added a new flag that used a bit past 8 and since this
flag is now required, tcpflags_t can no longer be a u8_t
This does not increase the size of struct tcp_pcb due to padding that
already existed (see bug #51326 for details)
Signed-off-by: goldsimon <goldsimon@gmx.de>
The function previously returned after posting a message, which is a short operation. Now it actually waits until the operation has completed - which may take a long time. This may break user programs. So all that remains is the cleanup separation in tcpip_callback() and tcpip_try_callback() :-(
Created two new functions for API cleanup:
tcpip_callback() that blocks until message is posted, cannot be called from IRQs.
tcpip_try_callback() that does not block and just tries to post a message. Can be called from IRQs.
Add compatibility #define tcpip_callback_with_block() that maps to these two functions according to "block" parameter.
This switches netconn_gethostbyname to use tcpip_send_msg_wait_sem to
take advantage of core locking support when enabled.
tcpip_send_msg_wait_sem handles blocking for the non-core locking case,
so we can remove the manual blocking in netconn_gethostbyname. For the
core locking case, we need to block if waiting on DNS callback. To
achieve this, we unlock the core and wait in lwip_netconn_do_gethostbyname.
This is the similar approach that netconn_write takes when it needs to
block to continue the write (see lwip_netconn_do_write)
This improves performance in the core locking case and is no change
for the non-core locking case
TCP timestamps were only sent if the remote side
requested it first. This enables the use of timestamps
for outgoing connections as well.
Signed-off-by: goldsimon <goldsimon@gmx.de>
Changes for TCP Appropriate Byte Counting introduce a potential cwnd
rollover by not taking into account integer promotion on tcpwnd_size_t
during inequality comparisions
This fixes the issue by introducing a macro TCP_WND_INC which detects
the rollover correctly and now holds the tcpwnd_size_t at the maximum
value rather than not incrementing the window. This provides a slight
performance improvement by allowing full use of the tcpwnd_size_t number
space for the congestion window
etharp_query() queues packets, instead of sending, if a relevant arp-request is
pending.
Code walks the packet (a pbuf chain) to determine whether any pbufs are marked
'volatile': If so, we cannot simply enqueue the packet, and instead allocate a
new pbuf from RAM, copying the original packet, and enqueueing this new pbuf.
The bug here is that the allocation refers to the tot_len field of a temp pbuf*,
'p', instead of the head, 'q'.
In the case where the first pbuf of the chain is non-volatile but the second pbuf
*is* volatile, then we'll request an allocation that uses the tot_len field of
the second pbuf. If the first pbuf is non-zero length, the allocated pbuf (chain)
will be too small to allow the copy.
Signed-off-by: goldsimon <goldsimon@gmx.de>
All callers pass pbuf_type to pbuf_init_alloced_pbuf(), so make it take
pbuf_type instead of u8_t.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
netif->output and etharp_output are only available when LWIP_IPV4=1.
Fix the skeleton file.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
The lwip/arch.h already provides a default implentation of LWIP_PLATFORM_ASSERT
and LWIP_PLATFORM_DIAG.
So both LWIP_PLATFORM_ASSERT and LWIP_PLATFORM_DIAG are never undefined here.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Call smtp_free_struct(s) in all smtp_send_mail_alloced error paths to ensure
no memory leak.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
The pcb is "struct altcp_pcb *" so we cannot call tcp_sndbuf/tcp_write here.
Use altcp_sndbuf/altcp_write instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
This commit adds a timeout to the zero-window probing (persist timer)
mechanism. LwIP has not historically had a timeout for the persist
timer, leading to unbounded blocking if connection drops during the
zero-window condition
This commit also adds two units test, one to check the RTO timeout
and a second to check the zero-window probe timeout
We don't have to keep a helper function just for the sake of a PBUF_RAW
constant. Inline ppp_singlebuf function.
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
pbuf_coalesce() creates a single pbuf out of a chain of pbufs, which is
exactly what ppp_singlebuf() need.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
Fix below build error if LWIP_IPV4 == 0.
cc -g -Wall -DLWIP_DEBUG -pedantic -Werror -Wparentheses -Wsequence-point -Wswitch-default -Wextra -Wundef -Wshadow -Wpointer-arith -Wcast-qual -Wc++-compat -Wwrite-strings -Wold-style-definition -Wcast-align -Wmissing-prototypes -Wredundant-decls -Wnested-externs -Wno-address -Wunreachable-code -Wuninitialized -Wlogical-op -I. -I../../.. -I../../../../lwip/src/include -I../../../ports/unix/port/include -I../../../../mbedtls/include -Wno-redundant-decls -DLWIP_HAVE_MBEDTLS=1 -c ../../../../lwip/src/core/netif.c
../../../../lwip/src/core/netif.c: In function ‘netif_add’:
../../../../lwip/src/core/netif.c:284:7: error: ‘ipaddr’ undeclared (first use in this function)
if (ipaddr == NULL) {
^~~~~~
../../../../lwip/src/core/netif.c:284:7: note: each undeclared identifier is reported only once for each function it appears in
../../../../lwip/src/core/netif.c:285:14: error: implicit declaration of function ‘ip_2_ip4’ [-Werror=implicit-function-declaration]
ipaddr = ip_2_ip4(IP4_ADDR_ANY);
^~~~~~~~
../../../../lwip/src/core/netif.c:285:5: error: nested extern declaration of ‘ip_2_ip4’ [-Werror=nested-externs]
ipaddr = ip_2_ip4(IP4_ADDR_ANY);
^~~~~~
../../../../lwip/src/core/netif.c:285:23: error: ‘IP4_ADDR_ANY’ undeclared (first use in this function)
ipaddr = ip_2_ip4(IP4_ADDR_ANY);
^~~~~~~~~~~~
../../../../lwip/src/core/netif.c:287:7: error: ‘netmask’ undeclared (first use in this function)
if (netmask == NULL) {
^~~~~~~
../../../../lwip/src/core/netif.c:290:7: error: ‘gw’ undeclared (first use in this function)
if (gw == NULL) {
^~
cc1: all warnings being treated as errors
../../Common.allports.mk:94: recipe for target 'netif.o' failed
make: *** [netif.o] Error 1
Fixes: 5967380c20 ("netif_add: avoid passing NULL pointers to subsequent functions")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
