!NO_SYS users may now use as well the TCPIP API for PPPoS input data,
this way they can disable PPP_INPROC_MULTITHREADED and run pppos_input()
inside the lwIP thread, which fixes, at least for them, all the
threading issues related to PPP_INPROC_MULTITHREADED.
If PPP_INPROC_MULTITHREADED is not enabled, we can free unfinished
RX pbuf from the pppos_disconnect() function because pppos_input()
is running in the same context. Thanks to the pppos->open flags we
now only need to free remaining pbuf in the disconnect function
if PPP_INPROC_MULTITHREADED is not enabled.
Don't process input data if PPPoS is closed, it helps using
pppos_input() from a different context to prevent pppos_input() to
modify PPPoS RX machine state on a closed PPPoS session. It also
prevents allocating pbuf (which are going to be tossed out by PPP core)
and parsing serial input on a closed session.
It only mitigates the fact that this function is actually NOT thread
safe in absolutely all cases, it does not fix it but it helps for a low
cost.
For example user application should never call pppos_input() while
pppos_connect() or pppos_listen() is currently running because both of
them are freeing any input pbuf left over from the last session before
resetting the PPPoS state, they really have to to prevent pbuf leaks.
We cannot fix that easily because we don't have spinlock with an
irqsave/irqrestore helper for IRQ contexts. Mutex cannot be used in
interrupt contexts (or again, with an IRQ mutex helper).
We are going to improve the documentation on this point.
Reduced static buffer to the strict necessary (26 bytes), removed
call to eui64_ntoa(), merged eui64_ntoa() into llv6_ntoa().
272 bytes (code + static buffers) to 140 bytes on x86_64.
Improved eui64_ntoa() as well, we don't need it anymore but I'd
like to keep all eui64_* helpers functions.
Set IPv6 link local invalid before clearing it. Don't wait sif6up() to set
the link local valid, netif_ip6_addr_set_state() is only an accessor function
so it does not start any discovery whatsoever.
PPPoS was actually not thread safe, pppos_input() can be called from
lwIP user port at any time, whatever the PPP state is. It might even be
called during pppos_connect() and pppos_listen(), this is quite unlikely
the port do that but nothing prevent the user to since we document
pppos_input() as being thread safe.
Added a mutex if PPP_INPROC_MULTITHREADED is set and ensure pppos_input()
is safe in regard to other pppos_* functions.
Now setting DNS addresses in sdns() using dns_setserver() instead
of keeping a local copy. This is probably the wanted PPP behavior,
we will see if users want this conditional.
This was confusing, recent lwIP changes fixed the meaning as well as
how it is used everywhere, making the administrative status a user-only
controlled flag. Now that it's clear, updated PPP to follow lwIP
core change.
Using netif_set_link_{up,down} instead of netif_set_{up,down} when PPP
reaches/leaves running state. PPP interface is now set to administratively
UP when created with link state down.
lwIP core might send packet when calling netif_set_up(), don't drop packets
anymore in ppp_netif_output_ip4() and ppp_netif_output_ip6() because flags
are cleared.
Only used for debug, reworked in a more clever way. It was actually broken
by design: setting an interface integer into a string without formatting
was quite a dumb idea.
Don't disconnect when we receive a PADT, we let the LCP Echo/Reply find
the fact that PPP session is down. Asking the PPP stack to end the
session require strict checking about the PPP phase to prevent endless
disconnection loops.
Luckily it previously does nothing because PADT frames are rarely sent
with a hunique tag and we only set the sc pointer if we receive a
hunique tag.
Makes it clear we are initiating the PPP session with ppp_connect
(i.e. acting as a PPP client) so there is no confusion possible
between ppp_connect and ppp_listen.
Prepare for PPP_SERVER support, we need to move auth configuration before
lcp_allowoptions is copied into lcp_gotoptions. Restore unused
auth_reset() function using pppd original source code.
We don't need ask_for_local boolean, this is only useful for setup which
can determine the local IP address from the system hostname, which is
probably meaningless for embedded devices (and probably any devices).
It was actually only set by ip_check_options() which is commented out in
lwIP because we don't parse a config file nor check PPP configuration
(user is responsible about writing a configuration which is logical ;-).
Furthermore ask_for_local boolean never set actually had the wrong
default for PPP server setups.
lwip/src/core/netif.c: In function ‘netif_set_ipaddr’:
lwip/src/core/netif.c:403:5: warning: implicit declaration of function ‘udp_netif_ipv4_addr_changed’ [-Wimplicit-function-declaration]
udp_netif_ipv4_addr_changed(&netif->ip_addr, ipaddr);
^
PPP is now pointerful for a while, we don't need anymore accessor functions
for the unique PPP local and static control block. Replaced
ppp_set_netif_statuscallback() and ppp_set_netif_linkcallback() functions to
defines.
Removed pppapi_do_ppp_set_netif_statuscallback() and
pppapi_do_ppp_set_netif_linkcallback(), they were useless because
netif_set_status_callback() and netif_set_link_callback() can be
safely called while PPP status is in dead (= non open) state
and even before the PPP session is actually created at all.
this changes the callback signatures of the ip_output and the
{udp,raw}_recv functions.
changes were made by going through all header files, searching for
occurrences of ip_addr_t, qualifying them as const and if required
modifying the corresponding c files, looking for other uses of ip_addr_t
that would be required.
the following header files were not treated as i'm not using them and
wouldn't see them compiled: api.h api_msg.h dhcp.h dns.h igmp.h
netifapi.h pppapi.h snmp.h snmp_msg.h snmp_structs.h ppp.h pppol2tp.h
test/*
no modifications were done on ip6_addr_t.
pppos_create() can be called whether the modem is ready to process the
PPP session since pppos_create() does not start the PPP session anymore,
moved the advise from pppos_create() to ppp_open().
ppp_sighup() hard change the PPP FSM phase, it ends up with a FSM
mismatch if PPP is currently connecting or disconnecting.
Only do "sighup" on the stable running phase, fallback to the close
method. Handle special DEAD and HOLDOFF states as well.
We can have an IPv6 only PPP interface, checking if6_up instead of if_up fixes
IPv6 only setup.
ppp_netif_output() which were only used for common code between
ppp_netif_output_ip4() and ppp_netif_output_ip6() is not necessary
anymore, removed, reducing call stack by one.
This is now totally useless, it was used for the PPP core code but it is not
used anymore, remove then the user ability to set the PPP error code through
PPPCTLS_ERRCODE.
Removed useless calls to ppp_ioctl(pcb, PPPCTLS_ERRCODE, …), we now assign
pcb->err_code directly instead. ppp_ioctl() is not linked anymore if user
application don't use it.
lwip/src/netif/ppp/polarssl/md4.c:43:20: warning: "LWIP_INCLUDED_POLARSSL_MD4" is not defined [-Wundef]
lwip/src/netif/ppp/polarssl/sha1.c:42:20: warning: "LWIP_INCLUDED_POLARSSL_SHA1" is not defined [-Wundef]
lwip/src/netif/ppp/polarssl/des.c:43:20: warning: "LWIP_INCLUDED_POLARSSL_DES" is not defined [-Wundef]
Added macro PPP_AUTH_SUPPORT, if none of auth protocols are enabled
(PAP, CHAP, EAP) we reduce PPP memory usage by compiling out all
struct fields and source code used for authentication.
VJ is only supported for PPPoS, RFCs does not say VJ is forbidden on
PPPoE or PPPoL2TP (looks like it is strongly discouraged though, due
to checksum issues when using VJ).
We only need to keep track of existing PPPoS interfaces if PPPoS
is not the only enabled protocol.
PPP CORE does not have callbacks pointers for all PPPoS callbacks
which should actually be required for PPPoS (VJ config, asyncmap, ...),
there is too much callbacks to create and PPPoS must be kept light,
especially for users who are only using PPPoS.
But there is a drawback, PPP CORE does not know which
lower protocols it is talking to thanks to the abstraction,
therefore if PPPoS is enabled as well as PPPoE or PPPoL2TP there
might be situation where PPP CORE calls pppos_ config functions
on interfaces which are NOT PPPoS one. This is very unlikely to
happen because protocols not supported by PPPoE or PPPoL2TP are
disabled at LCP/IPCP negotiation but we are better safe than sorry.
So we check if passed PPP pointer to PPPoS configuration functions
is a PPPoS interface by checking against a linked list of existing
PPPoS interfaces.
