Previously, ethip6 and lowpan6 each had their own copy of code that
used internal nd6 data structures to decide whether to send a packet
on the local link right away, or queue it while nd6 performed local
address resolution. This patch moves that code into nd6, thereby
eliminating all remaining cases of external access to internal nd6
data structures, as well as the need to expose two specific nd6
functions.
As a side effect, the patch effectively fixes two bugs in the lowpan6
code that were already fixed in the ethip6 code.
This patch rearranges the code division between nd6.c and ip6.c such
that the latter does not need to access ND6-internal data structures
(specifically, "default_router_list") directly anymore.
The new function, while currently not used internally, allows external
code to clear the ND destination cache in the case that it may have
become inconsistent with the current situation, for example as the
result of a change of locally assigned addresses, or a change in
routing tables implemented through the LWIP_HOOK_ND6_GET_GW hook.
On failure, nd6_get_next_hop_entry() returns an ERR_ type negative
error code. ethip6_output() erroneously assumed that that error would
always be ERR_MEM, even though it may also be ERR_RTE in practice.
With this patch, ethip6_output() simply forwards the returned error.
ppp/utils.c: In function 'ppp_vslprintf':
ppp/utils.c:251:12: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
val = (unsigned long) va_arg(args, void *);
^
This is because a void* type is casted into an unsigned long type,
which obviously isn't correct on LLP64 systems such as Windows.
Actually, we are not using %p, thus we remove %p support completely
instead of trying to fix the issue in unused code.
The variable i is equal to q->len after exit the for loop.
Check the received data should not change the logic of update packet_idx.
So let's simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Art says:
pppos_input() can call ppp_input() which can call pppos_disconnect() to
disconnect the interface. However, it will continue to read in
characters and allocate a pbuf from the PBUF_POOL and keep it in
pppos->in_head and in_tail. When a re-connect happens and pppos_connect()
is called, this pppos->in_head and in_tail are zeroed, hence a memory
leak. (This happens with PPP_INPROC_IRQ_SAFE not defined.)
A fix would be inside pppos_input() to break out of the loop inputting
characters after calling ppp_input() if pppos->open == 0. Note that
the loop is not even entered if pppos->open == 0.
ppp_input(ppp, inp);
if(pppos->open == 0) //get out if they disconnected
break;
Fix it in a similar way which doesn't add new code by moving the
existing pppos->open check inside the byte loop.
This commit increments the ip.drop statistic when an IP packet is
dropped due to no matching netif found and forwarding is disabled
This adds parity to the other places where mib2.ipinaddrerrors and
mib2.ipindiscards are incremented which also increment ip.drop
All the reset part of the code accessing netif->loop_first has lock protection,
the only missing part is "while (netif->loop_first != NULL)".
Fix it by adding lock protect around the while loop.
Also convert the code to use while{} loop instead of do .. while{} loop,
then we can avoid NULL test for in pointer in each loop and reduce a level of indent.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
While TCP_OVERSIZE works only when tcp_write() is used with
TCP_WRITE_FLAG_COPY, this new code achieves
similar benefits for the use case that the caller manages their own
send buffers and passes successive chunks of those to tcp_write()
without TCP_WRITE_FLAG_COPY.
In particular, if a buffer is passed to
tcp_write() that is adjacent in memory to the previously passed
buffer, it will be combined into the previous ROM pbuf reference
whenever possible, thus extending that ROM pbuf rather than allocating
a new ROM pbuf.
For the aforementioned use case, the advantages of this code are
twofold:
1) fewer ROM pbufs need to be allocated to send the same data, and,
2) the MAC layer gets outgoing TCP packets with shorter pbuf chains.
Original patch by Ambroz Bizjak <ambrop7@gmail.com>
Edited by David van Moolenbroek <david@minix3.org>
Signed-off-by: goldsimon <goldsimon@gmx.de>
This corrects a case in lwip_netconn_do_writemore() where if a
non-blocking socket receives ERR_MEM in a call to tcp_write(), it would
return ERR_MEM, which would result in ENOMEM coming out of the socket
layer
This case can be gracefully handled by returning ERR_WOULDBLOCK since the
socket is already marked as no longer writable and sent_tcp/poll_tcp will
mark the socket as writable again based on available buffer space
This is very similiar to how ERR_MEM is resolved for blocking sockets
Change lwIP UDP API to match socket behavior. Multicast traffic is now only received on a UDP PCB (and therefore on a UDP socket/netconn) when the PCB is bound to IP_ADDR_ANY.
Generally speaking, packets with a loopback destination address -
127.0.0.1 for IPv4 and ::1 for IPv6 - should not be accepted on
non-loopback interfaces. For IPv4, this is implied by RFC 1122
Sec. 3.2.1.3. For IPv6, it is mandated by RFC 4291 Sec. 2.5.3.
Failure to perform this filtering may have security implications, as
applications that bind sockets to loopback addresses may not expect
that nodes on the local external network be able to produce traffic
that will arrive at such sockets.
With this patch, lwIP drops packets that are sent to a loopback
address but do not originate from the interface that has the loopback
address assigned to it. This approach works regardless of whether it
is lwIP or the system using it that implements a loopback netif. The
only exception that must be made is for configurations that enable
netif packet loopback but disable the lwIP loopback netif: in that
case, loopback packets are routed across non-loopback netifs and would
thus be lost by the new filter as well.
For IPv6, loopback-destined packets are also no longer forwarded; the
IPv4 forwarding code already had a check for that.
As a small performance improvement, the IPv6 link-local/loopback
address check is now performed only once per packet rather than
repeatedly for every candidate netif.
In general, netif_default may be NULL, and various places in the code
already check for this case before attempting to dereference the
netif_default pointer. Some places do not perform this check though,
and may cause null pointer dereferences if netif_default is not set.
This patch adds NULL checks to those places as well.
It is better to present correct IP types in netconn API.
Netconn API now accepts IPv6 mapped IPv4 addresses as well as IPv6 and IPv4 in send(), bind() and connect(), but does NOT map IPv4 to IPv6 mapped IPv4 in getaddr() and receive() functions.
bind() may change IP type when previous type is IPADDR_TYPE_ANY
connect() IP type must exactly match bind IP type
Use correct IPADDRx_ANY type when calling ip_route()
IPv6 netconns are created as IPADDR_TYPE_ANY raw/udp/tcp PCBs internally
bind, connect and sendto now accept IPv6 mapped IPv4 addresses or IPv4 addresses as argument
getaddr and receive functions now return IPv6 mapped IPv4 addresses instead of IPv4 addresses
This behavior is close to BSD socket API
This commit returns LwIP to previous behavior where if the next unsent
segment can't be sent due to the current send window, we start the
persist timer. This is done to engage window probing in the case that
the subsequent window update from the receiver is dropped, thus
preventing connection deadlock
This commit refines the previous logic to only target the following case:
1) Next unsent segment doesn't fit within the send window (not
congestion) and there is some room in the window
2) Unacked queue is empty (otherwise data is inflight and the RTO timer
will take care of any dropped window updates)
See commit d8f090a759 (which removed this
behavior) to reference the old logic. The old logic falsely started the
persit timer when the RTO timer was already running.
This commit cleans up a duplicate #if check for LWIP_WND_SCALE in init.c
which was already under #if LWIP_WND_SCALE
This commit also improves documentation for TCP_WND in the window scaling
case to communicate TCP_WND is always the calculated (scaled) window value,
not the value reported in the TCP header
Our developers were confused by having to set both the window and scaling
factor and only after studying the usage of TCP_WND throughout the code, was
it determined to be the calculated (scaled) window
This is done in the pppd upstream and was disabled because we don't have
the allowed addresses list required for the auth_ip_addr function.
This is mostly necessary for PPP in server mode to prevent the peer to
use the IP address it wants instead of the one we want, which is
currently allowed.
Rewrite auth_ip_addr in a simple way where we forbid PPP peer to use
loopback net, a multicast address or a reserved class address. Added
to that we consider that PPP in server mode with peer required to
authenticate must provide the peer IP address, reject any IP address
wanted by peer different than the one we wanted. This is actually
an allowed addresses "list" of one entry that follows what is done
in the unused auth_ip_addr function.
