sg
33d5e646e5
fixed bug #41318 (Bad memory ref in tcp_input() after tcp_close())
2015-03-21 21:19:10 +01:00
sg
c00a62d37f
fixed bug #38468 (tcp_sent() not called on half-open connection for data ACKed with the same ack as FIN)
2015-03-21 20:56:42 +01:00
Sylvain Rochet
c8587e1242
tcp_in: typo fix. Fixes bug #4458944589 .
2015-03-20 13:22:47 +01:00
Clint Sbisa
32f6e7e231
tcp: Fix ooseq processing when seqno is near 2^32
...
An edge case in out-of-sequence TCP packet processing did not use the
appropriate macro to check if the sender overran the recieve window.
Consequently, this case sometimes evaluated to true when it shouldn't, which
resulted in various bad behavior, including trying to resize a TCP buffer to 4
gigabytes.
2015-03-20 08:32:14 +01:00
sg
974a853f40
patch #8423 "arch/perf.h" should be made an optional item
2015-02-11 21:25:47 +01:00
goldsimon
2775fb5a45
fixed bug #20506 "Initial congestion window is very small" again by implementing the calculation formula from RFC3390
2015-01-16 17:38:07 +01:00
Simon Goldschmidt
33237419c1
Parts of patch #8397 Typos corrected in comments and text outputs
2014-09-18 21:15:13 +02:00
Simon Goldschmidt
974f6982a1
fixed bug #37969 SYN packet dropped as short packet in tcp_input function
2014-06-03 21:07:49 +02:00
Simon Goldschmidt
035ecef8a5
Fixed bug #36210 lwIP does not elicit an empty ACK when received unacceptable ACK
2014-04-06 22:40:51 +02:00
Simon Goldschmidt
2f02120fee
Fixed typo.
2014-02-20 15:43:51 +01:00
Simon Goldschmidt
751deac9d1
Another fix to window scaling: support queueing more than 64 KByte in ooseq data
2014-02-12 21:34:19 +01:00
Simon Goldschmidt
3273c68b63
Added comments to clarify the LWIP_TCP_TIMESTAMPS option.
2014-02-07 11:46:23 +01:00
Simon Goldschmidt
a44e2190d6
TCP window scaling: change tcp_pcb::acked to u32_t when window scaling is enabled to prevent an overflow when more than 64 Kbytes are ACKed
2014-02-07 11:32:02 +01:00
Simon Goldschmidt
d2a89b424b
patch #6537/#7858: TCP window scaling support (OOS queueing still needs special handling)
2014-02-06 22:34:06 +01:00
goldsimon
7d0dab9d7d
partly fixed bug #25882 : TCP hangs on MSS > pcb->snd_wnd (by not creating segments bigger than half the window)
2012-02-12 14:14:19 +01:00
goldsimon
13075460ea
fixed bug #35305 : pcb may be freed too early on shutdown(WR)
2012-01-22 11:18:36 +01:00
goldsimon
dd8729063c
fixed bug #31177 : tcp timers can corrupt tcp_active_pcbs in some cases
2011-11-25 18:36:52 +01:00
goldsimon
edcc859b58
fixed bug #34638 : Dead code in tcp_receive - pcb->dupacks
2011-10-28 13:09:04 +02:00
goldsimon
0fb07ba328
- moved processing of refused_data to an own function (used from tcp_fasttmr and tcp_input);
...
- improved readability of tcp_slowtmr by using defines to access keepalive variables
2011-10-23 18:10:46 +02:00
Simon Goldschmidt
0333e81616
fixed bug #34517 (persist timer is started although no zero window is received) by starting the persist timer when a zero window is received, not when we have more data queued for sending than fits into the window
2011-10-13 21:18:16 +02:00
Simon Goldschmidt
b4c4fae3f5
slightly rearranged freeing an acked segment to prevent keeping the reference too long
2011-10-11 21:41:58 +02:00
Simon Goldschmidt
5c68bbe16f
Tried to fix bug #32417 ("TCP_OVERSIZE seems to have problems with (fast-)retransmission"): Reset pcb->unsent_oversize in 2 more places...
2011-09-29 21:12:34 +02:00
Simon Goldschmidt
07c610e068
Implemented limiting data on ooseq queue (task #9989 ) (define TCP_OOSEQ_MAX_BYTES / TCP_OOSEQ_MAX_PBUFS in lwipopts.h), added unit test for this new feature
2011-09-27 22:42:46 +02:00
Simon Goldschmidt
998f109fc8
fixed bug #28288 : Data after FIN in oos queue
2011-09-27 21:08:49 +02:00
Simon Goldschmidt
918470affc
fixed bug #33871 : rejecting TCP_EVENT_RECV() for the last packet including FIN can lose data
2011-09-23 19:14:17 +02:00
Simon Goldschmidt
a0bf8d5740
fixed bug #33952 PUSH flag in incoming packet is lost when packet is aggregated and sent to application
2011-09-03 21:57:26 +02:00
Simon Goldschmidt
b9c17dd1f0
fixed bug #34111 RST for ACK to listening pcb has wrong seqno
2011-09-01 21:00:11 +02:00
Simon Goldschmidt
f4c0018d7a
Fixed complier error for CHECKSUM_CHECK_TCP==0
2011-07-28 21:59:28 +02:00
goldsimon
2aec3a9789
use PCB_IS_IPV6(pcb) instead of pcb->isipv6 everywhere
2011-05-28 09:28:18 +00:00
goldsimon
6865806b55
Combined IPv4 and IPv6 code where possible, added defines to access IPv4/IPv6 in non-IP code so that the code is more readable.
2011-05-25 17:16:35 +00:00
goldsimon
4bfbe7ebeb
... and finally, we got a first working version of a dual-stack lwIP runnin IPv4 and IPv6 in parallel - big thanks to Ivan Delamer! (this is work in progress, so please beware, test a lot and report problems!)
2011-05-17 19:35:14 +00:00
goldsimon
4495516497
Removed 'dataptr' from 'struct tcp_seg' and calculate it in tcp_zero_window_probe (the only place where it was used).
2011-03-27 12:56:16 +00:00
goldsimon
effcb90fdf
Mreged back changes that were lost during the savannah hack 3 weeks ago (using the sources from http://git.infradead.org/users/dwmw2/lwip.git )
2010-12-20 18:03:51 +00:00
goldsimon
f7479781c1
bug #27352 : removed packing from ip_addr_t, the packed version is now only used in protocol headers. Added global storage for current src/dest IP address while in input functions.
2010-05-22 21:11:02 +00:00
goldsimon
6ffd29507c
Free recv_data when TF_RXCLOSED is set
2010-05-16 13:12:15 +00:00
goldsimon
a880709776
Let FIN come through although TF_RXCLOSED is set, send RST when data is received although TF_RXCLOSED is set, added TCP_EVENT_CLOSED for clearer code
2010-05-15 18:12:37 +00:00
goldsimon
a945bf07af
SO_REUSE: tcp_input: correctly handle multiple pcbs listening on the same port (but different address): first search for a specific address an only pass to ANY if no specific address has been found listening
2010-05-15 16:45:43 +00:00
goldsimon
ef0a7ecbcd
Remove uused SOF_* flags, define inherited flags in ip.h, not in tcp_in.c
2010-05-12 22:26:06 +00:00
goldsimon
cf0b831971
Fixed bug #29080 : Correctly handle remote side overrunning our rcv_wnd in ooseq case.
2010-03-25 06:39:01 +00:00
goldsimon
b6542b977e
task #7040 (Work on tcp_enqueue): Don't waste memory when chaining segments, added option TCP_OVERSIZE to prevent creating many small pbufs when calling tcp_write with many small blocks of data. Instead, pbufs are allocated larger than needed and the space is used for later calls to tcp_write.
2010-03-05 11:14:31 +00:00
goldsimon
2bf1184c39
Added comment after #endif
2010-03-03 16:05:20 +00:00
goldsimon
bcd4b76d31
Moved stack-internal parts of tcp.h to tcp_impl.h, tcp.h now only contains the actual application programmer's API
2010-02-21 11:35:21 +00:00
goldsimon
d9157a71bb
Task #10088 : Correctly implement close() vs. shutdown(). Now the application does not get any more recv callbacks after calling tcp_close(). Added tcp_shutdown().
2010-02-20 18:05:56 +00:00
goldsimon
96e9689dbd
Use new macro ip_addr_copy where applicable
2010-02-14 12:42:49 +00:00
goldsimon
44af02aa1e
Fixed wrong printf formatter
2010-02-10 07:58:01 +00:00
goldsimon
5d360a6711
Replaced struct ip_addr by typedef ip_addr_t to make changing the actual implementation behind the typedef easier.
2010-02-04 18:47:44 +00:00
goldsimon
5fa0347e64
Cleanly separate the portability file inet.h and its contents from the stack: moved htonX- functions to def.h (and the new def.c - they are not ipv4 dependent), let inet.h depend on ip_addr.h and not the other way round. This fixes bug #28732 .
2010-01-29 08:20:32 +00:00
goldsimon
0644c4c08e
Fixed bug #27871 : Calling tcp_abort() in recv callback can lead to accessing unallocated memory. As a consequence, ERR_ABRT means the application has called tcp_abort()!
2010-01-27 17:22:06 +00:00
goldsimon
e678e1bdcb
bug #28659 : Missing casts
2010-01-25 08:24:30 +00:00
goldsimon
052be0a328
Added comments
2010-01-13 11:16:47 +00:00
