PPP is just the upper protocol for PPPoE and PPPoL2TP, meaning it is only
started once "E" or L2TP is established. Therefore waiting indefinitely
for LCP packets on the PPP side does not make sense at all, if the lower
level protocol is UP, PPP *MUST* comes up as well or we should restart from
the beginning.
There is two passive modes for PPPoS, passive more, for which we will
try to connect and then listen silently, and silent mode, for which we
will listen silently from the beginning.
Introduce ppp_set_passive and ppp_set_silent so the mode can be chosen
before connecting/listening.
Setting PPP authentication most only be done when the PPP PCB is in the
dead phase (i.e. disconnected). This is safe to access the PPP PCB
members while the session is down, therefore providing a thread-safe
function of it is meaningless and it might even be misleading.
All our new ppp_set_* functions do not have their equivalent
pppapi_set_* functions and they are not going to have them. At least
we make ppp_set_auth consistent with all others ppp_set_*, so that it
doesn't look like special.
Helper function to setup MPPE (Microsoft Point to Point Encryption) for
a PPP link. Allows enabling/disabled MPPE itself, enabling/disabling
stateless support, and whether we are willing to negotiate 40-bit
and/or 128-bit encryptions.
print_string() displays characters as \\%.03o but without first
casting it from "char" to "unsigned char" so it gets sign-extended
to an int. This causes output like \37777777630 instead of \230.
(Based from pppd commit 5e8c3cb256a7e86e3572a82a75d51c6850efdbdc)
Found by coverity.
Introduced by c0e7d54e37 "Removed 2 mem_mallocs: error string can be a
global variable, include memory for sc_ac_cookie in struct pppoe_softc;
commented out unused code (sc_service_name/sc_concentrator_name)".
Fixes it by bailing out if received AC cookie is to big for us, this
can't really happen anyway.
There is absolutely no reason I did it this way in the first
place, maybe I feared that not all compilers have a proper
implementation of offsetof() ? It sounds stupid.
Unfortunately, there is no standard way to declare a pointer with
potentially unaligned accesses. The only portable way is to create
packed struct.
VJ support uses optimized accesses to IP and TCP struct to check a
whole part of them at once to speed up the (de)compressor.
This commit wrap potentially unaligned *u16_t and *u32_t accesses with
packed struct so all compilers are able to deal with them properly.
Closes: #48308
PPP auth required flag is currently hardcoded to true if PPP is
acting as a server and set to false if PPP is acting as a client.
This is probably the most wanted behavior, but since we now have the
ability to change that at runtime, allow users to do it.
It means we can now have a server which asks the client to authenticate
or vice versa. This is pretty unusual thought. What we don't support
yet is mutual authentication with a different set of user and password
per direction which is even less usual.
PPP use peer DNS setting is currently hardcoded to true if PPP is
acting as a client and set to false if PPP is actinf as a server.
This is probably the most wanted behavior, but since we now have the
ability to change that at runtime, allow users to do it.
We don't have a way to have a different default configuration if the
PPP PCB is going to be used as a client or as a server, therefore the
default configuration should be fine for both of them. Since enabling
peer DNS by default is dangerous for server mode, the default is now
not to ask for DNS servers and it should now be explicitely enabled
if needed, update the documentation accordingly.
Now that we have helpers to set those members externaly, pppos_listen
struct ppp_addrs* argument does not add any value. In addition it
was not a well chosen design choice because the user needed to keep a
copy of struct ppp_addrs when listening again for a new connection.
DNS servers should be set in IPCP allowoptions instead of wantoptions.
In addition if server mode is enabled we need to disable usepeerdns
config flag so we are not asking DNS servers to our client.
This function does not clear anything anymore. What it is now is an
optional way to notify PPP that link layer is started, changing the
PPP state from "dead" to "initialize". Rename it accordingly to what
the function really is.
What we really need here is to cleanup the PPP environment before
starting LCP, we don't care about the PPP state before LCP is
started. Move cleanups from ppp_clear to ppp_start to clean them
just before we need them cleaned.
What protocols init functions are meant to is to be called once to set
the default configuration before user specific configuration is set.
Until now, we reset to the default configuration just before
reconnecting, thus without allowing any time frame to let users change
it. That was fine until one user asked to be able to do that.
This change move protocols init functions calls from ppp_clear to
ppp_new, meaning user configuration is not overwritten anymore.
Our previous way of doing it was to clear everything except a small part
of the ppp_pcb structure and then populate the structure with default
values using protocols init functions.
But it means the user is currently not allowed to change the default
configuration except the few flags and values that are currently
available in the ppp_settings structure.
Instead of adding more and more fields to the ppp_settings structure,
actually making them duplicate of already existing structure members
of ppp_pcb, but unfortunately cleaned, we carefully checked that
everything is properly cleaned during protocol lowerdown/close and
replaced our giant memset to selective memset of the few ppp_pcb
members that are not properly cleaned.
ccp_init() is meant to be called once, providing default configuration
before user specific configuration is applied. In pppd user configuration
is set just after all protocol init functions are called, in lwIP we
use protocol reset functions to do that, which is more or less the same.
Therefore, be consistent and move CCP user configuration from ccp_init
to ccp_resetci.
Use LWIP_ARRAYSIZE to simplify the code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Sylvain Rochet <gradator@gradator.net>
[Sylvain Rochet <gradator@gradator.net>: added missing casts]
Signed-off-by: Sylvain Rochet <gradator@gradator.net>
In order to welcome mbed TLS, we need to ease the switch to:
- embedded PolarSSL 0.10.1-bsd copy
or - external PolarSSL
or - external mbed TLS
This change cleanup all our previously used LWIP_INCLUDED_POLARSSL_* defines,
which were not really useful after all, making them internal build triggers
only, and this change provides a new unique global flag to use an external
PolarSSL copy.
Unfortunately, all functions were renamed when PolarSSL was renamed to
mbed TLS, breaking the API. In order to continue supporting our embedded
PolarSSL copy while allowing our users to use mbed TLS, we need a function
map to deal with the API break.
This commit add a function map for all hashes and ciphers we are currently
using.
Work on PPP MEMPOOL re-added the previously removed ppp_init function
because we considered it useless. Re-add magic_init which was
previously in ppp_init and removed in commit 15fbfb7363, it does
not hurt doing so and might fill the gap if we failed understanding
the crypto implication about removing it.
Simon says:
ppp_init() does not seem to be used. The only thing it does is calling
magic_init(), which is not required because it its called again later
from ppp_input().
Also, the time from startup is rather constant, so calling sys_jiffies()
from ppp_init() does not create a random number.
