Axel Lin
21b9b5e741
Slightly improve raw_remove()/udp_remove() implementation
...
There should be no duplicate pcb in raw_pcbs/udp_pcbs list.
So the implementation of raw_remove()/udp_remove() can break from the for
loop once the target pcb is found and removed from the list.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
2015-11-19 07:21:00 +01:00
Dirk Ziegelmeier
6203737093
Rename snmp_mib2.h to snmp.h so source compatibility for user netif implementations is preserved
2015-11-12 21:25:42 +01:00
goldsimon
b401f42520
minor: fixed coding style (lwip style)
2015-10-07 10:03:12 +02:00
sg
2b971400fa
minor: coding style
2015-10-06 21:57:40 +02:00
sg
490581a0eb
minor/coding style: removed spaces before line ending
2015-10-06 21:08:28 +02:00
goldsimon
bc30899168
fixed compiler warnings where passing variable instance to ip_addr_isany
2015-09-28 07:56:52 +02:00
goldsimon
b0917d987a
Cleaned up using struct netif.ip_addr by creating API functions for it
2015-09-24 14:57:16 +02:00
goldsimon
99d2e5233d
struct udp_pcb.multicast_ip must be an ip_addr_t, too, to completely avoid temporary storage
2015-09-24 14:55:55 +02:00
goldsimon
c71723101a
Removed ip_2_ip4/6_c const macros again now that ip_2_ip4/6 macros keep the original const'ness
2015-09-24 14:38:52 +02:00
goldsimon
262a641396
eliminate temporary storage when using netif addresses for ip_addr_t* now that they have the correct type (ATTENTION: ip6_select_source_address() and ip4_netif_get_local_ip() now return ip_addr_t*!)
2015-09-24 14:34:24 +02:00
goldsimon
4d2f4ce78c
udp: don't use ip4_2_ip() where not required
2015-09-24 10:39:13 +02:00
sg
f36adac8ab
fixed compiling udp.c for IPv6-only
2015-09-23 22:07:14 +02:00
Dirk Ziegelmeier
f62022cdf3
Compiler warning fixes (mostly constness in dual-stack configurations)
2015-09-17 13:59:52 +02:00
goldsimon
8a0fb03e21
Separate mib2 counter/table callbacks from snmp agent. This both cleans up the code and should allow integration of a 3rd party agent/mib2.
2015-09-08 09:47:30 +02:00
sg
aa0e41c389
task #12178 : hardware checksum capabilities can be configured per netif (use NETIF_SET_CHECKSUM_CTRL() in your netif's init function)
2015-09-01 22:04:15 +02:00
goldsimon
367ac04ed8
Fixed UDP multicast receive filtering (multicast should only be received when bound to ANY or the destination multicast address)
2015-08-28 10:24:02 +02:00
goldsimon
43b18b20cc
fixed bug #45818 : API functions should check if type of ip_addr_t parameter matches the pcb type
2015-08-28 10:15:57 +02:00
sg
177c06b1f1
- prework for fixing bug #45029 : access IPv4 configuration of struct netif via new API (netif_ip4_addr()/netif_ip4_netmask()/netif_ip4_gw()) instead of accessing the struct member directly. This way, we can change the struct member types from ip4_addr_t to ip_addr_t;
...
- fixed some bugs in calls to ip4_addr*() where the cast to u8_t* did not reveal the wrong address type
2015-08-20 22:39:48 +02:00
sg
de8e810792
fixed bug #45120 : Broadcast & multiple interfaces handling
2015-08-19 20:55:03 +02:00
goldsimon
7df2dd67bd
another fix for LWIP_MULTICAST_TX_OPTIONS: without LWIP_IGMP, udp_pcb->mcast_ttl was not initialized
2015-08-19 09:19:08 +02:00
sg
4edade8079
allow multicast socket options IP_MULTICAST_TTL, IP_MULTICAST_IF and IP_MULTICAST_LOOP to be used without IGMP
2015-08-05 22:52:23 +02:00
goldsimon
4dc3c7a6a0
Fixed warnings about NULL check not required (ip_addr_isany) and implicit conversion (~)
2015-08-03 08:35:01 +02:00
goldsimon
e60bc69515
added more missing casts
2015-04-23 07:24:45 +02:00
goldsimon
beabd3c6b7
Added some macros with extension "_val" that work on actual instances and leave away the "if != NULL" check to get rid of gcc "-Waddress" warnings in the core code at least (I might not have caught all of them, yet)
2015-04-22 12:43:03 +02:00
sg
c1c65777b6
worked on task #13480 : added LWIP_IPV4 define - IPv4 can be disabled, leaving an IPv6-only stack (SNMP is still missing)
2015-04-12 10:43:46 +02:00
sg
ce7e31cd04
task #12722 (improve IPv4/v6 address handling): renamed ip_addr_t to ip4_addr_t, renamed ipX_addr_t to ip_addr_t and added IP version;
...
ip_addr_t is used for all generic IP addresses for the API, ip(4/6)_addr_t are only used internally or when initializing netifs or when calling version-related functions
2015-04-09 22:21:15 +02:00
sg
553c4203ab
tcp/udp_netif_ipv4_addr_changed(): don't change specific-address of local tcp_listen/udp_pcb to ANY on address change
2015-03-06 20:25:51 +01:00
sg
99dd78964a
fixed bug #40753 (re-bind UDP pcbs on change of IP address)
2015-02-26 22:17:30 +01:00
Joel Cunningham
9004554da3
fixed bug #43028 (IP_MULTICAST_TTL affects unicast datagrams)
2015-02-25 21:59:21 +01:00
sg
612e33c499
fixed bug #38061 (wrong multicast routing in IPv4) by adding an optional default netif for multicast routing
2015-02-25 20:58:11 +01:00
chrysn
9f065c0ea5
(api break) qualify ip_addr_t as const where feasible
...
this changes the callback signatures of the ip_output and the
{udp,raw}_recv functions.
changes were made by going through all header files, searching for
occurrences of ip_addr_t, qualifying them as const and if required
modifying the corresponding c files, looking for other uses of ip_addr_t
that would be required.
the following header files were not treated as i'm not using them and
wouldn't see them compiled: api.h api_msg.h dhcp.h dns.h igmp.h
netifapi.h pppapi.h snmp.h snmp_msg.h snmp_structs.h ppp.h pppol2tp.h
test/*
no modifications were done on ip6_addr_t.
2015-02-22 21:46:02 +01:00
sg
974a853f40
patch #8423 "arch/perf.h" should be made an optional item
2015-02-11 21:25:47 +01:00
goldsimon
4085a3fad4
task #11472 Support PBUF_REF for RX (IPv6 and IPv4/v6 reassembly might not work yet)
2014-12-08 14:45:36 +01:00
Simon Goldschmidt
33237419c1
Parts of patch #8397 Typos corrected in comments and text outputs
2014-09-18 21:15:13 +02:00
Simon Goldschmidt
be75c483d0
Fixed bug #41787 DHCP Discovery is invalid when an IP is set to thet netif (send discover, request and decline from 'any').
...
Addd functions to send udp/ipv4/ipv6 packets with source address 'any' although netif has an address assigned
2014-04-06 20:32:37 +02:00
Simon Goldschmidt
dceed2ea5c
fixed bug #39225 udp.c uses netif_matches_ip6_addr() incorrectly; renamed function netif_matches_ip6_addr() to netif_get_ip6_addr_match()
2014-02-25 22:30:46 +01:00
Simon Goldschmidt
9927d991ef
Fixed bug #37893 Unused variables in tcp_out (and in udp.c/.h)
2013-01-14 20:46:41 +01:00
goldsimon
7043983acc
udp_input: fixed unreachable code warning for CHECKSUM_CHECK_UDP==0
2012-03-25 17:20:22 +02:00
goldsimon
c8647c0396
implemented API functions to access so_options of IP pcbs (UDP, TCP, RAW) (fixes bug #35061 )
2011-12-17 22:12:01 +01:00
Simon Goldschmidt
0aea1b608a
Corrected fix for bug #34072 (UDP broadcast is received from wrong UDP pcb if udp port matches): pcbs bound to IPADDR_ANY did not receive broadcasts any more (bug #34294 )
2011-09-22 06:24:58 +02:00
Simon Goldschmidt
112158b056
Added a config option to randomize initial local TCP/UDP ports (so that different port ranges are used after a reboot; bug #33818 ; this one added tcp_init/udp_init functions again);
...
fixed a possible endless loop in tcp_new_port() if the number of active PCBs exceeds the number of available ports;
2011-09-11 12:44:01 +02:00
Simon Goldschmidt
4849eb4c54
fixed bug #34072 : UDP broadcast is received from wrong UDP pcb if udp port matches
2011-09-09 22:25:59 +02:00
goldsimon
d80be7961c
use PCB_IS_IPV6(pcb) instead of pcb->isipv6 everywhere; fixed compilation with LWIP_IPV6==1 but LWIP_IGMP==0
2011-05-28 09:30:43 +00:00
goldsimon
ccd7dbe0e4
Added ipX versions for routing
2011-05-26 15:46:44 +00:00
goldsimon
6865806b55
Combined IPv4 and IPv6 code where possible, added defines to access IPv4/IPv6 in non-IP code so that the code is more readable.
2011-05-25 17:16:35 +00:00
goldsimon
4bfbe7ebeb
... and finally, we got a first working version of a dual-stack lwIP runnin IPv4 and IPv6 in parallel - big thanks to Ivan Delamer! (this is work in progress, so please beware, test a lot and report problems!)
2011-05-17 19:35:14 +00:00
goldsimon
33d6dcec5b
Fixed bug #33048 (Bad range for IP source port numbers) by using ports in the IANA private/dynamic range (49152 through 65535).
2011-04-13 17:52:00 +00:00
goldsimon
aaa8d2795e
Don't chain empty pbufs when sending them (fixes bug #30625 )
2010-08-03 08:38:59 +00:00
goldsimon
04beab4f7d
IP_MULTICAST_LOOP shall be disabled by default
2010-07-12 14:10:28 +00:00
goldsimon
691410ba18
task #10495 : Added support for IP_MULTICAST_LOOP at socket- and raw-API level.
2010-07-12 09:34:11 +00:00