The new functions both take size_t as increment/decrement argument instead of s16_t (which needed to be range-checked before conversion everywhere) - in most places, the direction (increment or decrement) is known anyway, so no need to encode it in a sign bit
In tcp_output() there were a number of blocks of code performing
duplicate checks of 'if (seg == NULL)'. This combines them together
to reduce duplicate checks
TCP_OUTPUT_DEBUG and TCP_CWND_DEBUG also don't need to be guarded
by #if/#endif since the LWIP_DEBUGF infrastructure already compiles them
out when LWIP_DEBUG is not defined
The ip6_frag.drop counter is updated before all the code paths calling
goto nullreturn, so let's move updating ip6_frag.drop stats to nullreturn.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
This fixes a couple of occurrences where the src and dst parameters to
ip4_route_src() were swapped. This was most likely due to confusion between
ip_route(src, dst) and ip4_route_src(dst, src)
This was found in a system where LWIP_IPV4_SRC_ROUTING is 0
The UDP case was an application socket bound to INADDR_ANY with
IP_MULTICAST_IF set. Transmits would result in calling ip4_route(dst) where
dst was pcb->local_addr (which was INADDR_ANY) instead of pcb->mcast_ip4.
This resulted in a routing failure
The ICMP issue was found through code analysis only
There were uses of dhcp_release() followed immediately by dhcp_discover() but
dhcp_release() now stops dhcp so discovery would fail, so call dhcp_start()
after release which restarts discovery.
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
According to commit 1f780e86d5 ("PPP timeouts required depend on the number of allowed PPP sessions"):
Per PPP needs 6 timeouts (AUTH + PAP|CHAP|EAP + LCP + IPCP + IP6CP + PPPoE).
So update the minimal MEMP_NUM_SYS_TIMEOUT setting check accordingly.
Since we have LWIP_NUM_SYS_TIMEOUT_INTERNAL so just switch to use it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
The ip6_addr_t structure may have an addition slot so is not necessarily
the size of an ipv6 address, so some uses of sizeof(ip6_addr_t) were not
correct.
Signed-off-by: goldsimon <goldsimon@gmx.de>
No need to have additional if statement for PBUF_REF/PBUF_ROM.
It can be merged to the existing swtich(type) cases.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Adds partial support for selective acknowledgements (RFC 2018).
This change makes lwIP negotiate SACK support, and include SACK
data in outgoing empty ACK packets. It does not include it
in outgoing packets with data payload.
It also does not add support for handling incoming SACKs.
Signed-off-by: goldsimon <goldsimon@gmx.de>
TCP timestamps were only sent if the remote side
requested it first. This enables the use of timestamps
for outgoing connections as well.
Signed-off-by: goldsimon <goldsimon@gmx.de>
Changes for TCP Appropriate Byte Counting introduce a potential cwnd
rollover by not taking into account integer promotion on tcpwnd_size_t
during inequality comparisions
This fixes the issue by introducing a macro TCP_WND_INC which detects
the rollover correctly and now holds the tcpwnd_size_t at the maximum
value rather than not incrementing the window. This provides a slight
performance improvement by allowing full use of the tcpwnd_size_t number
space for the congestion window
etharp_query() queues packets, instead of sending, if a relevant arp-request is
pending.
Code walks the packet (a pbuf chain) to determine whether any pbufs are marked
'volatile': If so, we cannot simply enqueue the packet, and instead allocate a
new pbuf from RAM, copying the original packet, and enqueueing this new pbuf.
The bug here is that the allocation refers to the tot_len field of a temp pbuf*,
'p', instead of the head, 'q'.
In the case where the first pbuf of the chain is non-volatile but the second pbuf
*is* volatile, then we'll request an allocation that uses the tot_len field of
the second pbuf. If the first pbuf is non-zero length, the allocated pbuf (chain)
will be too small to allow the copy.
Signed-off-by: goldsimon <goldsimon@gmx.de>
All callers pass pbuf_type to pbuf_init_alloced_pbuf(), so make it take
pbuf_type instead of u8_t.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
This commit adds a timeout to the zero-window probing (persist timer)
mechanism. LwIP has not historically had a timeout for the persist
timer, leading to unbounded blocking if connection drops during the
zero-window condition
This commit also adds two units test, one to check the RTO timeout
and a second to check the zero-window probe timeout
Fix below build error if LWIP_IPV4 == 0.
cc -g -Wall -DLWIP_DEBUG -pedantic -Werror -Wparentheses -Wsequence-point -Wswitch-default -Wextra -Wundef -Wshadow -Wpointer-arith -Wcast-qual -Wc++-compat -Wwrite-strings -Wold-style-definition -Wcast-align -Wmissing-prototypes -Wredundant-decls -Wnested-externs -Wno-address -Wunreachable-code -Wuninitialized -Wlogical-op -I. -I../../.. -I../../../../lwip/src/include -I../../../ports/unix/port/include -I../../../../mbedtls/include -Wno-redundant-decls -DLWIP_HAVE_MBEDTLS=1 -c ../../../../lwip/src/core/netif.c
../../../../lwip/src/core/netif.c: In function ‘netif_add’:
../../../../lwip/src/core/netif.c:284:7: error: ‘ipaddr’ undeclared (first use in this function)
if (ipaddr == NULL) {
^~~~~~
../../../../lwip/src/core/netif.c:284:7: note: each undeclared identifier is reported only once for each function it appears in
../../../../lwip/src/core/netif.c:285:14: error: implicit declaration of function ‘ip_2_ip4’ [-Werror=implicit-function-declaration]
ipaddr = ip_2_ip4(IP4_ADDR_ANY);
^~~~~~~~
../../../../lwip/src/core/netif.c:285:5: error: nested extern declaration of ‘ip_2_ip4’ [-Werror=nested-externs]
ipaddr = ip_2_ip4(IP4_ADDR_ANY);
^~~~~~
../../../../lwip/src/core/netif.c:285:23: error: ‘IP4_ADDR_ANY’ undeclared (first use in this function)
ipaddr = ip_2_ip4(IP4_ADDR_ANY);
^~~~~~~~~~~~
../../../../lwip/src/core/netif.c:287:7: error: ‘netmask’ undeclared (first use in this function)
if (netmask == NULL) {
^~~~~~~
../../../../lwip/src/core/netif.c:290:7: error: ‘gw’ undeclared (first use in this function)
if (gw == NULL) {
^~
cc1: all warnings being treated as errors
../../Common.allports.mk:94: recipe for target 'netif.o' failed
make: *** [netif.o] Error 1
Fixes: 5967380c20 ("netif_add: avoid passing NULL pointers to subsequent functions")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Dirk Ziegelmeier <dirk@ziegelmeier.net>
Current code fails to allocate zero length pbuf (e.g. for PBUF_RAW PBUF_POOL),
fix it.
Fixes: eb269e61b5 ("First step to clean up pbuf implementation: add pbuf_alloc_reference() to allocate pbufs referencing external payload; move member initialization to common function; simplify PBUF_POOL chain allocator")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: goldsimon <goldsimon@gmx.de>
This fixes build error if LWIP_NETIF_TX_SINGLE_PBUF==1.
Fixes: dd811bca06 ("Fix bug #50694 (TX exist more pbufs after enable LWIP_NETIF_TX_SINGLE_PBUF) by not executing phase 2 for LWIP_NETIF_TX_SINGLE_PBUF==1")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
This commit adds TCP Appropriate Byte Counting (ABC) support based on
RFC 3465
ABC replaces the previous congestion window growth mechanism and has been
configured with limit of 2 SMSS. See task #14128 for discussion on
defaults, but the goal is to mitigate the performance impact of delayed
ACKs on congestion window growth
This commit also introduces a mechanism to track when the stack is
undergoing a period following an RTO where data is being retransmitted.
Lastly, this adds a unit test to verify RTO period tracking and some
basic ABC cwnd checking
while ((q != NULL) && (options[offset] != DHCP_OPTION_END) && (offset < offset_max)) {
should be
while ((q != NULL) && (offset < offset_max) && (options[offset] != DHCP_OPTION_END)) {
See https://jira.reactos.org/browse/CORE-8978 for more info.
This sets the pbuf's if_idx during the loopif poll function (the
equivalent netif input function). This was found during IP_PKTINFO
development where p->if_idx is read and was uninitialized
This commit corrects what looks like an ancient incorrect organization
of the logic for processing an ACK which acks new data. Once moved,
we can also change to using TCP_SEQ_LEQ on ackno instead of TCP_BETWEEN
because ackno has already been checked against snd_nxt
The work of checking the unsent queue and updating pcb->snd_buf (both
steps required for new data ACK) should be located under the conditional
that checks TCP_SEQ_BETWEEN(ackno, pcb->lastack+1, pcb->snd_nxt)
The comment following the unsent queue check/pcb->snd_buf update even
indicates "End of ACK for new data processing" when the logic is clearly
outside of this check
From what I can tell, this mis-organization isn't causing any incorrect
behavior since the unsent queue checked that ackno was between start of
segment and snd_nxt and recv_acked would be 0 during pcb->snd_buf update.
Instead this is waisted work for duplicate ACKS (can be common) and other
old ACKs
altcp is an abstraction layer that prevents applications linking against the
tcp.h functions but provides the same functionality. It is used to e.g. add
SSL/TLS or proxy-connect support to an application written for the tcp callback
API without that application knowing the protocol details.
Applications written against the altcp API are directly linked against the
tcp callback API for LWIP_ALTCP==0, but then cannot use layered protocols.