Follow-up of the #44565 bug fix, renamed the misnamed
PPP_INPROC_MULTITHREADED to PPP_INPROC_IRQ_SAFE because it is
IRQ safe but not thread safe.
Updated PPP documentation which now clearly state when and how
this feature can be used.
If PPP_INPROC_MULTITHREADED is true, then user does not what to use
the TCPIP API. Disabling the TCPIP API helps the user to understand
that PPP_INPROC_MULTITHREADED must not be used if he wish to use
the TCPIP API.
Don't process input data if PPPoS is closed, it helps using
pppos_input() from a different context to prevent pppos_input() to
modify PPPoS RX machine state on a closed PPPoS session. It also
prevents allocating pbuf (which are going to be tossed out by PPP core)
and parsing serial input on a closed session.
It only mitigates the fact that this function is actually NOT thread
safe in absolutely all cases, it does not fix it but it helps for a low
cost.
For example user application should never call pppos_input() while
pppos_connect() or pppos_listen() is currently running because both of
them are freeing any input pbuf left over from the last session before
resetting the PPPoS state, they really have to to prevent pbuf leaks.
We cannot fix that easily because we don't have spinlock with an
irqsave/irqrestore helper for IRQ contexts. Mutex cannot be used in
interrupt contexts (or again, with an IRQ mutex helper).
We are going to improve the documentation on this point.
PPPoS was actually not thread safe, pppos_input() can be called from
lwIP user port at any time, whatever the PPP state is. It might even be
called during pppos_connect() and pppos_listen(), this is quite unlikely
the port do that but nothing prevent the user to since we document
pppos_input() as being thread safe.
Added a mutex if PPP_INPROC_MULTITHREADED is set and ensure pppos_input()
is safe in regard to other pppos_* functions.
Makes it clear we are initiating the PPP session with ppp_connect
(i.e. acting as a PPP client) so there is no confusion possible
between ppp_connect and ppp_listen.
Prepare for PPP_SERVER support, we need to move auth configuration before
lcp_allowoptions is copied into lcp_gotoptions. Restore unused
auth_reset() function using pppd original source code.
We don't need ask_for_local boolean, this is only useful for setup which
can determine the local IP address from the system hostname, which is
probably meaningless for embedded devices (and probably any devices).
It was actually only set by ip_check_options() which is commented out in
lwIP because we don't parse a config file nor check PPP configuration
(user is responsible about writing a configuration which is logical ;-).
Furthermore ask_for_local boolean never set actually had the wrong
default for PPP server setups.
PPP is now pointerful for a while, we don't need anymore accessor functions
for the unique PPP local and static control block. Replaced
ppp_set_netif_statuscallback() and ppp_set_netif_linkcallback() functions to
defines.
Removed pppapi_do_ppp_set_netif_statuscallback() and
pppapi_do_ppp_set_netif_linkcallback(), they were useless because
netif_set_status_callback() and netif_set_link_callback() can be
safely called while PPP status is in dead (= non open) state
and even before the PPP session is actually created at all.
this changes the callback signatures of the ip_output and the
{udp,raw}_recv functions.
changes were made by going through all header files, searching for
occurrences of ip_addr_t, qualifying them as const and if required
modifying the corresponding c files, looking for other uses of ip_addr_t
that would be required.
the following header files were not treated as i'm not using them and
wouldn't see them compiled: api.h api_msg.h dhcp.h dns.h igmp.h
netifapi.h pppapi.h snmp.h snmp_msg.h snmp_structs.h ppp.h pppol2tp.h
test/*
no modifications were done on ip6_addr_t.
pppos_create() can be called whether the modem is ready to process the
PPP session since pppos_create() does not start the PPP session anymore,
moved the advise from pppos_create() to ppp_open().
lwip/src/netif/ppp/polarssl/md4.c:43:20: warning: "LWIP_INCLUDED_POLARSSL_MD4" is not defined [-Wundef]
lwip/src/netif/ppp/polarssl/sha1.c:42:20: warning: "LWIP_INCLUDED_POLARSSL_SHA1" is not defined [-Wundef]
lwip/src/netif/ppp/polarssl/des.c:43:20: warning: "LWIP_INCLUDED_POLARSSL_DES" is not defined [-Wundef]
Added macro PPP_AUTH_SUPPORT, if none of auth protocols are enabled
(PAP, CHAP, EAP) we reduce PPP memory usage by compiling out all
struct fields and source code used for authentication.
VJ is only supported for PPPoS, RFCs does not say VJ is forbidden on
PPPoE or PPPoL2TP (looks like it is strongly discouraged though, due
to checksum issues when using VJ).
We only need to keep track of existing PPPoS interfaces if PPPoS
is not the only enabled protocol.
PPP CORE does not have callbacks pointers for all PPPoS callbacks
which should actually be required for PPPoS (VJ config, asyncmap, ...),
there is too much callbacks to create and PPPoS must be kept light,
especially for users who are only using PPPoS.
But there is a drawback, PPP CORE does not know which
lower protocols it is talking to thanks to the abstraction,
therefore if PPPoS is enabled as well as PPPoE or PPPoL2TP there
might be situation where PPP CORE calls pppos_ config functions
on interfaces which are NOT PPPoS one. This is very unlikely to
happen because protocols not supported by PPPoE or PPPoL2TP are
disabled at LCP/IPCP negotiation but we are better safe than sorry.
So we check if passed PPP pointer to PPPoS configuration functions
is a PPPoS interface by checking against a linked list of existing
PPPoS interfaces.
Reordered functions in the order they are declared in headers.
Removed useless ppp_link_down() function.
Merged ppp_stop() and ppp_close().
Merged ppp_hup() and ppp_sighup().
xmit_accm was meant to be a user configurable asyncmap, it was actually
broken since the introduction of ppp_new by the way we now reset the PPP
initial state, looks like no one until now is needing it anymore. If
necessary we will reintroduce this feature later properly instead of a
dirty and ugly hack into the PPP code.
We don't have callbacks which can be set or cleared for PPPoS
configuration, there is too much callbacks to create and PPPoS must be
kept light, therefore PPPoS functions can be called when PPP core
configure a PPPoE or PPPoL2TP interface, this is very unlikely to
happens because protocols not supported by PPPoE or PPPoL2TP are
disabled at LCP/IPCP negotiation but being safe is still better.
Check if passed PPP pointer to PPPoS configuration functions is a PPPoS
interface by using a linked list of exiting PPPoS interfaces.
Moved ppp_write_over_ethernet() and ppp_netif_output_over_ethernet() to pppoe.c
Moved ppp_write_over_l2tp() and ppp_netif_output_over_l2tp() to pppol2tp.c
Re-order ppp.[ch] functions in the order functions should be called from
user application. Moved create functions, which actually return a PPP
control block before functions needing a PPP control block.
Added necessary PPP core functions for PPPoE and PPPoL2TP status
notificaton (ppp_link_failed and ppp_link_end), removed callback,
low level protocol are now calling PPP core "link" functions.
First step of a rework of how low level protocols are using the
PPP core. Low level protocols are now going to use the core instead
of core using the low level protocols.
Final goal: separate PPP core code from low level protocols.
Re-order ppp.[ch] functions in the order functions should be called from
user application. Moved create functions, which actually return a PPP
control block before functions needing a PPP control block.
The only benefit of ppp_delete() call was about having a persistent
netif interface. netif was moved out of PPP pcb so we don't need
ppp_delete() anymore, second step in simplifying the weird
new/open/free/delete PPP API.
The only benefit of ppp_new() call was about having a persistent netif
interface. netif was moved out of PPP pcb so we don't need ppp_new()
anymore, first step in simplifying the weird new/open/free/delete PPP
API.
Users might want to share a netif control block between an Ethernet
interface and a PPPoS interface (I want actually) in case PPP is just
used as redundancy if Ethernet is down (eg. PPPoS GPRS fail over).
Moved netif out of PPP control block in a similar way it is currently
done for Ethernet interfaces. Furthermore, this is a first step on
removing the "new/create/free/delete" API which is awful but currently
necessary to handle fail over from PPPoX to another PPPoX (eg. from PPoE
on xDSL to PPPoS on GPRS fail over) without free()ing the netif which
might be used on udp_sendto() or L2TP VPN links.
when custom lwipopts.h files are used (MEMP_USE_CUSTOM_POOLS), there is
typically the need to use sizeof(some_struct) in there, but on structs
that are not already declared in lwip; thus, they use #include on custom
headers.
even if the included files have proper include guards, the way memp
headers are used (
typedef enum {
#define LWIP_MEMPOOL(name,num,size,desc) MEMP_##name,
#include "lwip/memp_std.h"
MEMP_MAX
} memp_t;
) breaks when fresh includes are involved. in this patch, this gets
circumvented by including lwip/memp_std.h once with an empty
LWIP_MEMPOOL definition, so that all the includes from custom
lwippools.h files can be handled safely.