TCP/UDP documentation: Add reference to PCB mempool #defines

(cherry picked from commit 8bf2e21b4d)
This commit is contained in:
Dirk Ziegelmeier 2019-01-28 13:47:03 +01:00 committed by Simon Goldschmidt
parent cd91647999
commit 9d8b8d9c69
2 changed files with 7 additions and 1 deletions

View File

@ -647,6 +647,7 @@ tcp_abort(struct tcp_pcb *pcb)
* bound to all local IP addresses.
* If another connection is bound to the same port, the function will
* return ERR_USE, otherwise ERR_OK is returned.
* @see MEMP_NUM_TCP_PCB_LISTEN and MEMP_NUM_TCP_PCB
*
* @param pcb the tcp_pcb to bind (no check is done whether this pcb is
* already bound!)
@ -1933,6 +1934,7 @@ tcp_alloc(u8_t prio)
* any of the TCP PCB lists.
* The pcb is not put on any list until binding using tcp_bind().
* If memory is not available for creating the new pcb, NULL is returned.
* @see MEMP_NUM_TCP_PCB_LISTEN and MEMP_NUM_TCP_PCB
*
* @internal: Maybe there should be a idle TCP PCB list where these
* PCBs are put on. Port reservation using tcp_bind() is implemented but
@ -1952,6 +1954,7 @@ tcp_new(void)
* Creates a new TCP protocol control block but doesn't
* place it on any of the TCP PCB lists.
* The pcb is not put on any list until binding using tcp_bind().
* @see MEMP_NUM_TCP_PCB_LISTEN and MEMP_NUM_TCP_PCB
*
* @param type IP address type, see @ref lwip_ip_addr_type definitions.
* If you want to listen to IPv4 and IPv6 (dual-stack) connections,
@ -2067,6 +2070,7 @@ tcp_err(struct tcp_pcb *pcb, tcp_err_fn err)
* @ingroup tcp_raw
* Used for specifying the function that should be called when a
* LISTENing connection has been connected to another host.
* @see MEMP_NUM_TCP_PCB_LISTEN and MEMP_NUM_TCP_PCB
*
* @param pcb tcp_pcb to set the accept callback
* @param accept callback function to call for this pcb when LISTENing

View File

@ -1208,6 +1208,7 @@ udp_remove(struct udp_pcb *pcb)
* Creates a new UDP pcb which can be used for UDP communication. The
* pcb is not active until it has either been bound to a local address
* or connected to a remote address.
* @see MEMP_NUM_UDP_PCB
*
* @return The UDP PCB which was created. NULL if the PCB data structure
* could not be allocated.
@ -1242,7 +1243,8 @@ udp_new(void)
* Create a UDP PCB for specific IP type.
* The pcb is not active until it has either been bound to a local address
* or connected to a remote address.
*
* @see MEMP_NUM_UDP_PCB
*
* @param type IP address type, see @ref lwip_ip_addr_type definitions.
* If you want to listen to IPv4 and IPv6 (dual-stack) packets,
* supply @ref IPADDR_TYPE_ANY as argument and bind to @ref IP_ANY_TYPE.