lwip/doc/ppp.txt

PPP interface for lwIP

Author: Sylvain Rochet

Table of Contents:

1 - Supported PPP protocols and features
2 - Raw API PPP example for all protocols
3 - PPPoS input path (raw API and thread safe API)
4 - Thread safe PPP API (PPPAPI)
5 - Upgrading from lwIP <= 1.4.x to lwIP >= 1.5.x



1 Supported PPP protocols and features
======================================

Supported Low level protocols:
* PPP over serial using HDLC-like framing, such as wired dialup modems
  or mobile telecommunications GPRS/EDGE/UMTS/HSPA+/LTE modems
* PPP over Ethernet, such as xDSL modems
* PPP over L2TP (Layer 2 Tunneling Protocol) LAC (L2TP Access Concentrator),
  IP tunnel over UDP, such as VPN access

Supported auth protocols:
* PAP, Password Authentication Protocol
* CHAP, Challenge-Handshake Authentication Protocol, also known as CHAP-MD5
* MSCHAPv1, Microsoft version of CHAP, version 1
* MSCHAPv2, Microsoft version of CHAP, version 2
* EAP, Extensible Authentication Protocol

Supported address protocols:
* IPCP, IP Control Protocol, IPv4 addresses negotiation
* IP6CP, IPv6 Control Protocol, IPv6 link-local addresses negotiation

Supported compression or miscellaneous protocols, for serial links only:
* PFC, Protocol Field Compression
* ACFC, Address-and-Control-Field-Compression
* ACCM, Asynchronous-Control-Character-Map
* VJ, Van Jacobson TCP/IP Header Compression



2 Raw API PPP example for all protocols
=======================================

As usual, raw API for lwIP means the lightweight API which *MUST* only be used
for NO_SYS=1 systems or called inside lwIP core thread for NO_SYS=0 systems.

/*
 * Globals
 * =======
 */

/* The PPP control block */
ppp_pcb *ppp;

/* The PPP IP interface */
struct netif ppp_netif;


/*
 * PPP status callback
 * ===================
 *
 * PPP status callback is called on PPP status change (up, down, …) from lwIP
 * core thread
 */

/* PPP status callback example */
static void status_cb(ppp_pcb *pcb, int err_code, void *ctx) {
  struct netif *pppif = ppp_netif(pcb);
  LWIP_UNUSED_ARG(ctx);

  switch(err_code) {
    case PPPERR_NONE: {
#if LWIP_DNS
      ip_addr_t ns;
#endif /* LWIP_DNS */
      printf("status_cb: Connected\n");
#if PPP_IPV4_SUPPORT
      printf("   our_ipaddr  = %s\n", ip_ntoa(&pppif->ip_addr));
      printf("   his_ipaddr  = %s\n", ip_ntoa(&pppif->gw));
      printf("   netmask     = %s\n", ip_ntoa(&pppif->netmask));
#if LWIP_DNS
      ns = dns_getserver(0);
      printf("   dns1        = %s\n", ip_ntoa(&ns));
      ns = dns_getserver(1);
      printf("   dns2        = %s\n", ip_ntoa(&ns));
#endif /* LWIP_DNS */
#endif /* PPP_IPV4_SUPPORT */
#if PPP_IPV6_SUPPORT
      printf("   our6_ipaddr = %s\n", ip6addr_ntoa(netif_ip6_addr(pppif, 0)));
#endif /* PPP_IPV6_SUPPORT */
      break;
    }
    case PPPERR_PARAM: {
      printf("status_cb: Invalid parameter\n");
      break;
    }
    case PPPERR_OPEN: {
      printf("status_cb: Unable to open PPP session\n");
      break;
    }
    case PPPERR_DEVICE: {
      printf("status_cb: Invalid I/O device for PPP\n");
      break;
    }
    case PPPERR_ALLOC: {
      printf("status_cb: Unable to allocate resources\n");
      break;
    }
    case PPPERR_USER: {
      printf("status_cb: User interrupt\n");
      break;
    }
    case PPPERR_CONNECT: {
      printf("status_cb: Connection lost\n");
      break;
    }
    case PPPERR_AUTHFAIL: {
      printf("status_cb: Failed authentication challenge\n");
      break;
    }
    case PPPERR_PROTOCOL: {
      printf("status_cb: Failed to meet protocol\n");
      break;
    }
    case PPPERR_PEERDEAD: {
      printf("status_cb: Connection timeout\n");
      break;
    }
    case PPPERR_IDLETIMEOUT: {
      printf("status_cb: Idle Timeout\n");
      break;
    }
    case PPPERR_CONNECTTIME: {
      printf("status_cb: Max connect time reached\n");
      break;
    }
    case PPPERR_LOOPBACK: {
      printf("status_cb: Loopback detected\n");
      break;
    }
    default: {
      printf("status_cb: Unknown error code %d\n", err_code);
      break;
    }
  }

/*
 * This should be in the switch case, this is put outside of the switch
 * case for example readability.
 */

  if (err_code == PPPERR_NONE) {
    return;
  }

  /* ppp_close() was previously called, don't reconnect */
  if (err_code == PPPERR_USER) {
    /* ppp_free(); -- can be called here */
    return;
  }

  /*
   * Try to reconnect in 30 seconds, if you need a modem chatscript you have
   * to do a much better signaling here ;-)
   */
  ppp_connect(pcb, 30);
}


/*
 * Creating a new PPPoS session
 * ============================
 *
 * In lwIP, PPPoS is not PPPoSONET, in lwIP PPPoS is PPPoSerial.
 */

#include "netif/ppp/pppos.h"

/*
 * Create a new PPPoS interface
 *
 * ppp_netif, netif to use for this PPP link, i.e. PPP IP interface
 * ppp_sio, handler to your SIO port (see include/lwip/sio.h)
 * status_cb, PPP status callback, called on PPP status change (up, down, …)
 * ctx_cb, optional user-provided callback context pointer
 */
ppp = pppos_create(&ppp_netif,
       ppp_sio,
       status_cb, ctx_cb);


/*
 * Creating a new PPPoE session
 * ============================
 */

#include "netif/ppp/pppoe.h"

/*
 * Create a new PPPoE interface
 *
 * ppp_netif, netif to use for this PPP link, i.e. PPP IP interface
 * ethif, already existing and setup Ethernet interface to use
 * service_name, PPPoE service name discriminator (not supported yet)
 * concentrator_name, PPPoE concentrator name discriminator (not supported yet)
 * status_cb, PPP status callback, called on PPP status change (up, down, …)
 * ctx_cb, optional user-provided callback context pointer
 */
ppp = pppoe_create(&ppp_netif,
       &ethif,
       service_name, concentrator_name,
       status_cb, ctx_cb);


/*
 * Creating a new PPPoL2TP session
 * ===============================
 */

#include "netif/ppp/pppol2tp.h"

/*
 * Create a new PPPoL2TP interface
 *
 * ppp_netif, netif to use for this PPP link, i.e. PPP IP interface
 * netif, optional already existing and setup output netif, necessary if you
 *        want to set this interface as default route to settle the chicken
 *        and egg problem with VPN links
 * ipaddr, IP to connect to
 * port, UDP port to connect to (usually 1701)
 * secret, L2TP secret to use
 * secret_len, size in bytes of the L2TP secret
 * status_cb, PPP status callback, called on PPP status change (up, down, …)
 * ctx_cb, optional user-provided callback context pointer
 */
ppp = pppol2tp_create(&ppp_netif,
       struct netif *netif, ip_addr_t *ipaddr, u16_t port,
       u8_t *secret, u8_t secret_len,
       ppp_link_status_cb_fn link_status_cb, void *ctx_cb);


/*
 * PPP link configuration
 * ======================
 */

/* Auth configuration, this is pretty self-explanatory */
ppp_set_auth(ppp, PPPAUTHTYPE_ANY, "login", "password");

/* Set this interface as default route */
ppp_set_default(ppp);


/*
 * Initiate PPP connection
 * =======================
 */

/*
 * Initiate PPP negotiation, without waiting (holdoff=0), can only be called
 * if PPP session is in the dead state (i.e. disconnected).
 */
u16_t holdoff = 0;
ppp_connect(ppp, holdoff);


/*
 * Closing PPP connection
 * ======================
 */

/*
 * Initiate the end of the PPP session, without carrier lost signal
 * (nocarrier=0), meaning a clean shutdown of PPP protocols.
 * You can call this function at anytime.
 */
u8_t nocarrier = 0;
ppp_close(ppp, nocarrier);
/*
 * Then you must wait your status_cb() to be called, it may takes from a few
 * seconds to several tens of seconds depending on the current PPP state.
 */

/*
 * Freeing a PPP connection
 * ========================
 */

/*
 * Free the PPP control block, can only be called if PPP session is in the
 * dead state (i.e. disconnected). You need to call ppp_close() before.
 */
ppp_free(ppp);



3 PPPoS input path (raw API and thread safe API)
================================================

PPPoS require a serial I/O SIO port (see include/lwip/sio.h). Received data
on serial port should be sent to lwIP using the pppos_input() function.

This function is thread-safe by default if NO_SYS==0. You can alter whether
you want this function thread-safe or not using the PPP_INPROC_MULTITHREADED
setting in your lwipopts.h file.

/*
 * Fonction to call for received data
 *
 * ppp, PPP control block
 * buffer, input buffer
 * buffer_len, buffer length in bytes
 */
void pppos_input(ppp, buffer, buffer_len);



4 Thread safe PPP API (PPPAPI)
==============================

There is a thread safe API for all corresponding ppp_* functions, you have to
enable LWIP_PPP_API in your lwipopts.h file, then see include/lwip/pppapi.h,
this is actually pretty obvious.



5 Upgrading from lwIP <= 1.4.x to lwIP >= 1.5.x
===============================================

PPP API was fully reworked between 1.4.x and 1.5.x releases. However porting
from previous lwIP version is pretty easy:

* Previous PPP API used an integer to identify PPP sessions, we are now
  using ppp_pcb* control block, therefore all functions changed from "int ppp"
  to "ppp_pcb *ppp"

* struct netif was moved outside the PPP structure, you have to provide a netif
  for PPP interface in pppoX_create() functions

* PPP session are not started automatically after you created them anymore,
  you have to call ppp_connect(), this way you can configure the session before
  starting it.

* Previous PPP API used CamelCase, we are now using snake_case.

* Previous PPP API mixed PPPoS and PPPoE calls, this isn't the case anymore,
  PPPoS functions are now prefixed pppos_ and PPPoE functions are now prefixed
  pppoe_, common functions are now prefixed ppp_.

* New PPPERR_ error codes added, check you have all of them in your status
  callback function

* Only the following include files should now be used in user application:
  #include "lwip/pppapi.h"
  #include "netif/ppp/pppos.h"
  #include "netif/ppp/pppoe.h"
  #include "netif/ppp/pppol2tp.h"

  Functions from ppp.h can be used, but you don't need to include this header
  file as it is already included by above header files.

* PPP_INPROC_OWNTHREAD was broken by design and was removed, you have to create
  your own rx thread

* If you used tcpip_callback_with_block() on ppp_ functions you may wish to use
  the PPPAPI API instead.

* ppp_sighup and ppp_close functions were merged using an optional argument
  "nocarrier" on ppp_close.