1
0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-20 05:11:42 +00:00
hekate/bdk/memory_map.h

123 lines
4.0 KiB
C

/*
* Copyright (c) 2019-2021 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _MEMORY_MAP_H_
#define _MEMORY_MAP_H_
/* --- BIT/BCT: 0x40000000 - 0x40003000 --- */
/* --- IPL: 0x40008000 - 0x40028000 --- */
#define LDR_LOAD_ADDR 0x40007000
#define IPL_LOAD_ADDR 0x40008000
#define IPL_SZ_MAX SZ_128K
#define XUSB_RING_ADDR 0x40020000 // XUSB EP context and TRB ring buffers.
#define SECMON_MIN_START 0x4002B000 // Minimum reserved address for secmon.
#define SDRAM_PARAMS_ADDR 0x40030000 // SDRAM extraction buffer during sdram init.
/* start.S / exception_handlers.S */
#define SYS_STACK_TOP_INIT 0x4003FF00
#define FIQ_STACK_TOP 0x40040000
#define IRQ_STACK_TOP 0x40040000
#define IPL_RELOC_ADDR 0x4003FF00
#define IPL_RELOC_SZ 0x10
#define EXCP_STORAGE_ADDR 0x4003FFF0
#define EXCP_STORAGE_SZ 0x10
/* --- DRAM START --- */
#define DRAM_START 0x80000000
#define HOS_RSVD SZ_16M // Do not write anything in this area.
#define NYX_LOAD_ADDR 0x81000000
#define NYX_SZ_MAX SZ_16M
/* --- Gap: 0x82000000 - 0x82FFFFFF --- */
/* Stack theoretical max: 33MB */
#define IPL_STACK_TOP 0x83100000
#define IPL_HEAP_START 0x84000000
#define IPL_HEAP_SZ SZ_512M
/* --- Gap: 1040MB 0xA4000000 - 0xE4FFFFFF --- */
// Virtual disk / Chainloader buffers.
#define RAM_DISK_ADDR 0xA4000000
#define RAM_DISK_SZ 0x41000000 // 1040MB.
#define RAM_DISK2_SZ 0x21000000 // 528MB.
// NX BIS driver sector cache.
#define NX_BIS_CACHE_ADDR 0xC5000000
#define NX_BIS_CACHE_SZ 0x10020000 // 256MB.
#define NX_BIS_LOOKUP_ADDR 0xD6000000
#define NX_BIS_LOOKUP_SZ 0xF000000 // 240MB.
// L4T Kernel Panic Storage (PSTORE).
#define PSTORE_ADDR 0xB0000000
#define PSTORE_SZ SZ_2M
//#define DRAM_LIB_ADDR 0xE0000000
/* --- Chnldr: 252MB 0xC03C0000 - 0xCFFFFFFF --- */ //! Only used when chainloading.
// SDMMC DMA buffers 1
#define SDMMC_UPPER_BUFFER 0xE5000000
#define SDMMC_UP_BUF_SZ SZ_128M
// Nyx buffers.
#define NYX_STORAGE_ADDR 0xED000000
#define NYX_RES_ADDR 0xEE000000
#define NYX_RES_SZ SZ_16M
// SDMMC DMA buffers 2
#define SDXC_BUF_ALIGNED 0xEF000000
#define MIXD_BUF_ALIGNED 0xF0000000
#define EMMC_BUF_ALIGNED MIXD_BUF_ALIGNED
#define SDMMC_DMA_BUF_SZ SZ_16M // 4MB currently used.
// Nyx LvGL buffers.
#define NYX_LV_VDB_ADR 0xF1000000
#define NYX_FB_SZ 0x384000 // 1280 x 720 x 4.
#define NYX_LV_MEM_ADR 0xF1400000
#define NYX_LV_MEM_SZ 0x6600000 // 70MB.
// Framebuffer addresses.
#define IPL_FB_ADDRESS 0xF5A00000
#define IPL_FB_SZ 0x384000 // 720 x 1280 x 4.
#define LOG_FB_ADDRESS 0xF5E00000
#define LOG_FB_SZ 0x334000 // 1280 x 656 x 4.
#define NYX_FB_ADDRESS 0xF6200000
#define NYX_FB2_ADDRESS 0xF6600000
#define NYX_FB_SZ 0x384000 // 1280 x 720 x 4.
/* OBSOLETE: Very old hwinit based payloads were setting a carveout here. */
#define DRAM_MEM_HOLE_ADR 0xF6A00000
#define DRAM_MEM_HOLE_SZ 0x8140000
/* --- Hole: 129MB 0xF6A00000 - 0xFEB3FFFF --- */
#define DRAM_START2 0xFEB40000
// USB buffers.
#define USBD_ADDR 0xFEF00000
#define USB_DESCRIPTOR_ADDR 0xFEF40000
#define USB_EP_CONTROL_BUF_ADDR 0xFEF80000
#define USB_EP_BULK_IN_BUF_ADDR 0xFF000000
#define USB_EP_BULK_OUT_BUF_ADDR 0xFF800000
#define USB_EP_BULK_OUT_MAX_XFER SZ_8M
// #define EXT_PAYLOAD_ADDR 0xC0000000
// #define RCM_PAYLOAD_ADDR (EXT_PAYLOAD_ADDR + ALIGN(PATCHED_RELOC_SZ, 0x10))
// #define COREBOOT_ADDR (0xD0000000 - rom_size)
#endif