1
0
mirror of https://github.com/CTCaer/hekate.git synced 2024-12-25 06:18:11 +00:00

bdk: fan: add Hoag and Aula SKUs support

Now that what was hanging Aula is found (using PWM with its clock disabled), add full support for fan control on both SKUs.
This commit is contained in:
CTCaer 2022-05-08 05:07:38 +03:00
parent 58a2094448
commit 4a1cb1f2ea

View File

@ -18,8 +18,11 @@
#include <thermal/fan.h>
#include <power/regulator_5v.h>
#include <soc/bpmp.h>
#include <soc/clock.h>
#include <soc/fuse.h>
#include <soc/gpio.h>
#include <soc/hw_init.h>
#include <soc/pinmux.h>
#include <soc/t210.h>
#include <utils/util.h>
@ -37,19 +40,26 @@ void set_fan_duty(u32 duty)
curr_duty = duty;
//! TODO: Add HOAG/AULA support.
u32 hw_type = fuse_read_hw_type();
if (hw_type != FUSE_NX_HW_TYPE_ICOSA &&
hw_type != FUSE_NX_HW_TYPE_IOWA)
return;
if (!fan_init)
{
// Fan tachometer.
PINMUX_AUX(PINMUX_AUX_CAM1_PWDN) = PINMUX_TRISTATE | PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 1;
u32 pull_resistor = hw_get_chip_id() == GP_HIDREV_MAJOR_T210 ? PINMUX_PULL_UP : 0;
PINMUX_AUX(PINMUX_AUX_CAM1_PWDN) = PINMUX_TRISTATE | PINMUX_INPUT_ENABLE | pull_resistor | 1;
gpio_config(GPIO_PORT_S, GPIO_PIN_7, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_S, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
// Enable PWM if disabled.
if (fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA)
{
// Ease the stress to APB.
bpmp_freq_t prev_fid = bpmp_clk_rate_set(BPMP_CLK_NORMAL);
clock_enable_pwm();
// Restore OC.
bpmp_clk_rate_set(prev_fid);
}
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (0x100 << 16); // Max PWM to disable fan.
PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) = 1; // Set source to PWM1.